2022-11-09 01:27:53

by Christian Marangi

[permalink] [raw]
Subject: [PATCH 1/5] clk: qcom: krait-cc: fix wrong parent order for secondary mux

The secondary mux parent order is swapped.
This currently doesn't cause problems as the secondary mux is used for idle
clk and as a safe clk source while reprogramming the hfpll.

Each mux have 2 or more output but he always have a safe source to
switch while reprogramming the connected pll. We use a clk notifier to
switch to the correct parent before clk core can apply the correct rate.
The parent to switch is hardcoded in the mux struct.

For the secondary mux the safe source to use is the qsb parent as it's
the only fixed clk as the acpus_aux is a pll that can source from pxo or
from pll8.

The hardcoded safe parent for the secondary mux is set to index 0 that
in the secondary mux map is set to 2.

But the index 0 is actually acpu_aux in the parent list.

Fix the swapped parents to correctly handle idle frequency and output a
sane clk_summary report.

Signed-off-by: Christian Marangi <[email protected]>
---
drivers/clk/qcom/krait-cc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/krait-cc.c b/drivers/clk/qcom/krait-cc.c
index cfd961d5cc45..c2a261cfeb6a 100644
--- a/drivers/clk/qcom/krait-cc.c
+++ b/drivers/clk/qcom/krait-cc.c
@@ -116,8 +116,8 @@ krait_add_sec_mux(struct device *dev, int id, const char *s,
int ret;
struct krait_mux_clk *mux;
static const char *sec_mux_list[] = {
- "acpu_aux",
"qsb",
+ "acpu_aux",
};
struct clk_init_data init = {
.parent_names = sec_mux_list,
--
2.37.2



2022-11-09 01:38:23

by Christian Marangi

[permalink] [raw]
Subject: [PATCH 5/5] clk: qcom: krait-cc: convert to parent_data API

Modernize the krait-cc driver to parent-data API and refactor to drop
any use of parent_names. From Documentation all the required clocks should
be declared in DTS so fw_name can be correctly used to get the parents
for all the muxes. .name is also declared to save compatibility with old
DT.

While at it also drop some hardcoded index and introduce an enum to make
index values more clear.

Signed-off-by: Christian Marangi <[email protected]>
---
drivers/clk/qcom/krait-cc.c | 202 ++++++++++++++++++++----------------
1 file changed, 112 insertions(+), 90 deletions(-)

diff --git a/drivers/clk/qcom/krait-cc.c b/drivers/clk/qcom/krait-cc.c
index 63322cb38aa8..0a15da568156 100644
--- a/drivers/clk/qcom/krait-cc.c
+++ b/drivers/clk/qcom/krait-cc.c
@@ -15,6 +15,16 @@

#include "clk-krait.h"

+enum {
+ cpu0_mux = 0,
+ cpu1_mux,
+ cpu2_mux,
+ cpu3_mux,
+ l2_mux,
+
+ clks_max,
+};
+
static unsigned int sec_mux_map[] = {
2,
0,
@@ -69,21 +79,23 @@ static int krait_notifier_register(struct device *dev, struct clk *clk,
return ret;
}

-static int
+static struct clk_hw *
krait_add_div(struct device *dev, int id, const char *s, unsigned int offset)
{
struct krait_div2_clk *div;
+ static struct clk_parent_data p_data[1];
struct clk_init_data init = {
- .num_parents = 1,
+ .num_parents = ARRAY_SIZE(p_data),
.ops = &krait_div2_clk_ops,
.flags = CLK_SET_RATE_PARENT,
};
- const char *p_names[1];
+ struct clk_hw *clk;
+ char *parent_name;
int cpu, ret;

div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL);
if (!div)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);

div->width = 2;
div->shift = 6;
@@ -93,18 +105,25 @@ krait_add_div(struct device *dev, int id, const char *s, unsigned int offset)

init.name = kasprintf(GFP_KERNEL, "hfpll%s_div", s);
if (!init.name)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);

- init.parent_names = p_names;
- p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s);
- if (!p_names[0]) {
- kfree(init.name);
- return -ENOMEM;
+ init.parent_data = p_data;
+ parent_name = kasprintf(GFP_KERNEL, "hfpll%s", s);
+ if (!parent_name) {
+ clk = ERR_PTR(-ENOMEM);
+ goto err_parent_name;
}

+ p_data[0].fw_name = parent_name;
+ p_data[0].name = parent_name;
+
ret = devm_clk_hw_register(dev, &div->hw);
- if (ret)
- goto err;
+ if (ret) {
+ clk = ERR_PTR(ret);
+ goto err_clk;
+ }
+
+ clk = &div->hw;

/* clk-krait ignore any rate change if mux is not flagged as enabled */
if (id < 0)
@@ -113,33 +132,36 @@ krait_add_div(struct device *dev, int id, const char *s, unsigned int offset)
else
clk_prepare_enable(div->hw.clk);

-err:
- kfree(p_names[0]);
+err_clk:
+ kfree(parent_name);
+err_parent_name:
kfree(init.name);

- return ret;
+ return clk;
}

-static int
+static struct clk_hw *
krait_add_sec_mux(struct device *dev, int id, const char *s,
unsigned int offset, bool unique_aux)
{
int cpu, ret;
struct krait_mux_clk *mux;
- static const char *sec_mux_list[] = {
- "qsb",
- "acpu_aux",
+ static struct clk_parent_data sec_mux_list[2] = {
+ { .name = "qsb", .fw_name = "qsb" },
+ {},
};
struct clk_init_data init = {
- .parent_names = sec_mux_list,
+ .parent_data = sec_mux_list,
.num_parents = ARRAY_SIZE(sec_mux_list),
.ops = &krait_mux_clk_ops,
.flags = CLK_SET_RATE_PARENT,
};
+ struct clk_hw *clk;
+ char *parent_name;

mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
if (!mux)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);

mux->offset = offset;
mux->lpl = id >= 0;
@@ -159,23 +181,33 @@ krait_add_sec_mux(struct device *dev, int id, const char *s,

init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s);
if (!init.name)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);

if (unique_aux) {
- sec_mux_list[0] = kasprintf(GFP_KERNEL, "acpu%s_aux", s);
- if (!sec_mux_list[0]) {
- ret = -ENOMEM;
+ parent_name = kasprintf(GFP_KERNEL, "acpu%s_aux", s);
+ if (!parent_name) {
+ clk = ERR_PTR(-ENOMEM);
goto err_aux;
}
+ sec_mux_list[1].fw_name = parent_name;
+ sec_mux_list[1].name = parent_name;
+ } else {
+ sec_mux_list[1].name = "apu_aux";
}

ret = devm_clk_hw_register(dev, &mux->hw);
- if (ret)
- goto unique_aux;
+ if (ret) {
+ clk = ERR_PTR(ret);
+ goto err_clk;
+ }
+
+ clk = &mux->hw;

ret = krait_notifier_register(dev, mux->hw.clk, mux);
- if (ret)
- goto unique_aux;
+ if (ret) {
+ clk = ERR_PTR(ret);
+ goto err_clk;
+ }

/* clk-krait ignore any rate change if mux is not flagged as enabled */
if (id < 0)
@@ -184,28 +216,29 @@ krait_add_sec_mux(struct device *dev, int id, const char *s,
else
clk_prepare_enable(mux->hw.clk);

-unique_aux:
+err_clk:
if (unique_aux)
- kfree(sec_mux_list[0]);
+ kfree(parent_name);
err_aux:
kfree(init.name);
- return ret;
+ return clk;
}

-static struct clk *
-krait_add_pri_mux(struct device *dev, int id, const char *s,
- unsigned int offset)
+static struct clk_hw *
+krait_add_pri_mux(struct device *dev, struct clk_hw *hfpll_div, struct clk_hw *sec_mux,
+ int id, const char *s, unsigned int offset)
{
int ret;
struct krait_mux_clk *mux;
- const char *p_names[3];
+ static struct clk_parent_data p_data[3];
struct clk_init_data init = {
- .parent_names = p_names,
- .num_parents = ARRAY_SIZE(p_names),
+ .parent_data = p_data,
+ .num_parents = ARRAY_SIZE(p_data),
.ops = &krait_mux_clk_ops,
.flags = CLK_SET_RATE_PARENT,
};
- struct clk *clk;
+ struct clk_hw *clk;
+ char *hfpll_name;

mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
if (!mux)
@@ -223,55 +256,44 @@ krait_add_pri_mux(struct device *dev, int id, const char *s,
if (!init.name)
return ERR_PTR(-ENOMEM);

- p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s);
- if (!p_names[0]) {
+ hfpll_name = kasprintf(GFP_KERNEL, "hfpll%s", s);
+ if (!hfpll_name) {
clk = ERR_PTR(-ENOMEM);
- goto err_p0;
+ goto err_hfpll;
}

- p_names[1] = kasprintf(GFP_KERNEL, "hfpll%s_div", s);
- if (!p_names[1]) {
- clk = ERR_PTR(-ENOMEM);
- goto err_p1;
- }
+ p_data[0].fw_name = hfpll_name;
+ p_data[0].name = hfpll_name;

- p_names[2] = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s);
- if (!p_names[2]) {
- clk = ERR_PTR(-ENOMEM);
- goto err_p2;
- }
+ p_data[1].hw = hfpll_div;
+ p_data[2].hw = sec_mux;

ret = devm_clk_hw_register(dev, &mux->hw);
if (ret) {
clk = ERR_PTR(ret);
- goto err_p3;
+ goto err_clk;
}

- clk = mux->hw.clk;
+ clk = &mux->hw;

- ret = krait_notifier_register(dev, clk, mux);
+ ret = krait_notifier_register(dev, mux->hw.clk, mux);
if (ret)
clk = ERR_PTR(ret);

-err_p3:
- kfree(p_names[2]);
-err_p2:
- kfree(p_names[1]);
-err_p1:
- kfree(p_names[0]);
-err_p0:
+err_clk:
+ kfree(hfpll_name);
+err_hfpll:
kfree(init.name);
return clk;
}

/* id < 0 for L2, otherwise id == physical CPU number */
-static struct clk *krait_add_clks(struct device *dev, int id, bool unique_aux)
+static struct clk_hw *krait_add_clks(struct device *dev, int id, bool unique_aux)
{
- int ret;
+ struct clk_hw *hfpll_div, *sec_mux, *pri_mux;
unsigned int offset;
void *p = NULL;
const char *s;
- struct clk *clk;

if (id >= 0) {
offset = 0x4501 + (0x1000 * id);
@@ -283,22 +305,23 @@ static struct clk *krait_add_clks(struct device *dev, int id, bool unique_aux)
s = "_l2";
}

- ret = krait_add_div(dev, id, s, offset);
- if (ret) {
- clk = ERR_PTR(ret);
+ hfpll_div = krait_add_div(dev, id, s, offset);
+ if (IS_ERR(hfpll_div)) {
+ pri_mux = hfpll_div;
goto err;
}

- ret = krait_add_sec_mux(dev, id, s, offset, unique_aux);
- if (ret) {
- clk = ERR_PTR(ret);
+ sec_mux = krait_add_sec_mux(dev, id, s, offset, unique_aux);
+ if (IS_ERR(sec_mux)) {
+ pri_mux = sec_mux;
goto err;
}

- clk = krait_add_pri_mux(dev, id, s, offset);
+ pri_mux = krait_add_pri_mux(dev, hfpll_div, sec_mux, id, s, offset);
+
err:
kfree(p);
- return clk;
+ return pri_mux;
}

static struct clk *krait_of_get(struct of_phandle_args *clkspec, void *data)
@@ -306,7 +329,7 @@ static struct clk *krait_of_get(struct of_phandle_args *clkspec, void *data)
unsigned int idx = clkspec->args[0];
struct clk **clks = data;

- if (idx >= 5) {
+ if (idx >= clks_max) {
pr_err("%s: invalid clock index %d\n", __func__, idx);
return ERR_PTR(-EINVAL);
}
@@ -327,9 +350,8 @@ static int krait_cc_probe(struct platform_device *pdev)
const struct of_device_id *id;
unsigned long cur_rate, aux_rate;
int cpu;
- struct clk *clk;
- struct clk **clks;
- struct clk *l2_pri_mux_clk;
+ struct clk_hw *mux, *l2_pri_mux;
+ struct clk *clk, **clks;

id = of_match_device(krait_cc_match_table, dev);
if (!id)
@@ -348,21 +370,21 @@ static int krait_cc_probe(struct platform_device *pdev)
}

/* Krait configurations have at most 4 CPUs and one L2 */
- clks = devm_kcalloc(dev, 5, sizeof(*clks), GFP_KERNEL);
+ clks = devm_kcalloc(dev, clks_max, sizeof(*clks), GFP_KERNEL);
if (!clks)
return -ENOMEM;

for_each_possible_cpu(cpu) {
- clk = krait_add_clks(dev, cpu, id->data);
+ mux = krait_add_clks(dev, cpu, id->data);
if (IS_ERR(clk))
return PTR_ERR(clk);
- clks[cpu] = clk;
+ clks[cpu] = mux->clk;
}

- l2_pri_mux_clk = krait_add_clks(dev, -1, id->data);
- if (IS_ERR(l2_pri_mux_clk))
- return PTR_ERR(l2_pri_mux_clk);
- clks[4] = l2_pri_mux_clk;
+ l2_pri_mux = krait_add_clks(dev, -1, id->data);
+ if (IS_ERR(l2_pri_mux))
+ return PTR_ERR(l2_pri_mux);
+ clks[l2_mux] = l2_pri_mux->clk;

/*
* We don't want the CPU or L2 clocks to be turned off at late init
@@ -372,7 +394,7 @@ static int krait_cc_probe(struct platform_device *pdev)
* they take over.
*/
for_each_online_cpu(cpu) {
- clk_prepare_enable(l2_pri_mux_clk);
+ clk_prepare_enable(clks[l2_mux]);
WARN(clk_prepare_enable(clks[cpu]),
"Unable to turn on CPU%d clock", cpu);
}
@@ -388,16 +410,16 @@ static int krait_cc_probe(struct platform_device *pdev)
* two different rates to force a HFPLL reinit under all
* circumstances.
*/
- cur_rate = clk_get_rate(l2_pri_mux_clk);
+ cur_rate = clk_get_rate(clks[l2_mux]);
aux_rate = 384000000;
if (cur_rate < aux_rate) {
pr_info("L2 @ Undefined rate. Forcing new rate.\n");
cur_rate = aux_rate;
}
- clk_set_rate(l2_pri_mux_clk, aux_rate);
- clk_set_rate(l2_pri_mux_clk, 2);
- clk_set_rate(l2_pri_mux_clk, cur_rate);
- pr_info("L2 @ %lu KHz\n", clk_get_rate(l2_pri_mux_clk) / 1000);
+ clk_set_rate(clks[l2_mux], aux_rate);
+ clk_set_rate(clks[l2_mux], 2);
+ clk_set_rate(clks[l2_mux], cur_rate);
+ pr_info("L2 @ %lu KHz\n", clk_get_rate(clks[l2_mux]) / 1000);
for_each_possible_cpu(cpu) {
clk = clks[cpu];
cur_rate = clk_get_rate(clk);
--
2.37.2


2022-11-09 01:39:43

by Christian Marangi

[permalink] [raw]
Subject: [PATCH 2/5] clk: qcom: krait-cc: also enable secondary mux and div clk

clk-krait ignore any rate change if clk is not flagged as enabled.
Correctly enable the secondary mux and div clk to correctly change rate
instead of silently ignoring the request.

Signed-off-by: Christian Marangi <[email protected]>
---
drivers/clk/qcom/krait-cc.c | 21 ++++++++++++++++++++-
1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/krait-cc.c b/drivers/clk/qcom/krait-cc.c
index c2a261cfeb6a..0e497e69e3e3 100644
--- a/drivers/clk/qcom/krait-cc.c
+++ b/drivers/clk/qcom/krait-cc.c
@@ -80,6 +80,7 @@ krait_add_div(struct device *dev, int id, const char *s, unsigned int offset)
};
const char *p_names[1];
struct clk *clk;
+ int cpu;

div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL);
if (!div)
@@ -103,6 +104,17 @@ krait_add_div(struct device *dev, int id, const char *s, unsigned int offset)
}

clk = devm_clk_register(dev, &div->hw);
+ if (IS_ERR(clk))
+ goto err;
+
+ /* clk-krait ignore any rate change if mux is not flagged as enabled */
+ if (id < 0)
+ for_each_online_cpu(cpu)
+ clk_prepare_enable(div->hw.clk);
+ else
+ clk_prepare_enable(div->hw.clk);
+
+err:
kfree(p_names[0]);
kfree(init.name);

@@ -113,7 +125,7 @@ static int
krait_add_sec_mux(struct device *dev, int id, const char *s,
unsigned int offset, bool unique_aux)
{
- int ret;
+ int cpu, ret;
struct krait_mux_clk *mux;
static const char *sec_mux_list[] = {
"qsb",
@@ -165,6 +177,13 @@ krait_add_sec_mux(struct device *dev, int id, const char *s,
if (ret)
goto unique_aux;

+ /* clk-krait ignore any rate change if mux is not flagged as enabled */
+ if (id < 0)
+ for_each_online_cpu(cpu)
+ clk_prepare_enable(mux->hw.clk);
+ else
+ clk_prepare_enable(mux->hw.clk);
+
unique_aux:
if (unique_aux)
kfree(sec_mux_list[0]);
--
2.37.2


2022-12-02 21:00:44

by Bjorn Andersson

[permalink] [raw]
Subject: Re: (subset) [PATCH 1/5] clk: qcom: krait-cc: fix wrong parent order for secondary mux

On Wed, 9 Nov 2022 01:56:27 +0100, Christian Marangi wrote:
> The secondary mux parent order is swapped.
> This currently doesn't cause problems as the secondary mux is used for idle
> clk and as a safe clk source while reprogramming the hfpll.
>
> Each mux have 2 or more output but he always have a safe source to
> switch while reprogramming the connected pll. We use a clk notifier to
> switch to the correct parent before clk core can apply the correct rate.
> The parent to switch is hardcoded in the mux struct.
>
> [...]

Applied, thanks!

[1/5] clk: qcom: krait-cc: fix wrong parent order for secondary mux
commit: 8e456411abcbf899c04740b9dbb3dcefcd61c946
[2/5] clk: qcom: krait-cc: also enable secondary mux and div clk
commit: 18ae57b1e8abee6c453381470f6e18991d2901a8
[3/5] clk: qcom: krait-cc: handle secondary mux sourcing out of acpu_aux
commit: e5dc1a4c01510da8438dddfdf4200b79d73990dc
[4/5] clk: qcom: krait-cc: convert to devm_clk_hw_register
commit: 8ea9fb841a7e528bc8ae79d726ce951dcf7b46e2
[5/5] clk: qcom: krait-cc: convert to parent_data API
commit: 56a655e1c41a86445cf2de656649ad93424b2a63

Best regards,
--
Bjorn Andersson <[email protected]>