Add dt-bindings document for the NPCM7xx sgpio driver
Signed-off-by: Jim Liu <[email protected]>
---
Changes for v3:
- modify description
- modify in/out property name
Changes for v2:
- modify description
---
.../bindings/gpio/nuvoton,sgpio.yaml | 83 +++++++++++++++++++
1 file changed, 83 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml
diff --git a/Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml b/Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml
new file mode 100644
index 000000000000..673535314cff
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/nuvoton,sgpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton SGPIO controller
+
+maintainers:
+ - Jim LIU <[email protected]>
+
+description:
+ This SGPIO controller is for NUVOTON NPCM7xx and NPCM8xx SoC.
+ Nuvoton NPCM7xx SGPIO module is combine serial to parallel IC (HC595)
+ and parallel to serial IC (HC165), and use APB3 clock to control it.
+ This interface has 4 pins (D_out , D_in, S_CLK, LDSH).
+ NPCM7xx/NPCM8xx have two sgpio module each module can support up
+ to 64 output pins,and up to 64 input pin, the pin is only for gpi or gpo.
+ GPIO pins have sequential, First half is gpo and second half is gpi.
+ GPIO pins can be programmed to support the following options
+ - Support interrupt option for each input port and various interrupt
+ sensitivity option (level-high, level-low, edge-high, edge-low)
+ - Directly connected to APB bus and its shift clock is from APB bus clock
+ divided by a programmable value.
+ - ngpios is number of nuvoton,input-ngpios GPIO lines and nuvoton,output-ngpios GPIO lines.
+ nuvoton,input-ngpios GPIO lines is only for gpi.
+ nuvoton,output-ngpios GPIO lines is only for gpo.
+
+properties:
+ compatible:
+ enum:
+ - nuvoton,npcm750-sgpio
+ - nuvoton,npcm845-sgpio
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ nuvoton,input-ngpios: true
+
+ nuvoton,output-ngpios: true
+
+ bus-frequency: true
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+ - interrupts
+ - nuvoton,input-ngpios
+ - nuvoton,output-ngpios
+ - clocks
+ - bus-frequency
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ gpio8: gpio@101000 {
+ compatible = "nuvoton,npcm750-sgpio";
+ reg = <0x101000 0x200>;
+ clocks = <&clk NPCM7XX_CLK_APB3>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ bus-frequency = <16000000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ nuvoton,input-ngpios = <64>;
+ nuvoton,output-ngpios = <64>;
+ status = "disabled";
+ };
--
2.17.1
On 20/12/2022 09:01, Jim Liu wrote:
> Add dt-bindings document for the NPCM7xx sgpio driver
>
> Signed-off-by: Jim Liu <[email protected]>
> ---
> Changes for v3:
> - modify description
> - modify in/out property name
> Changes for v2:
> - modify description
> ---
> .../bindings/gpio/nuvoton,sgpio.yaml | 83 +++++++++++++++++++
> 1 file changed, 83 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml
>
> diff --git a/Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml b/Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml
> new file mode 100644
> index 000000000000..673535314cff
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml
> @@ -0,0 +1,83 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/gpio/nuvoton,sgpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Nuvoton SGPIO controller
> +
> +maintainers:
> + - Jim LIU <[email protected]>
> +
> +description:
> + This SGPIO controller is for NUVOTON NPCM7xx and NPCM8xx SoC.
> + Nuvoton NPCM7xx SGPIO module is combine serial to parallel IC (HC595)
> + and parallel to serial IC (HC165), and use APB3 clock to control it.
> + This interface has 4 pins (D_out , D_in, S_CLK, LDSH).
> + NPCM7xx/NPCM8xx have two sgpio module each module can support up
> + to 64 output pins,and up to 64 input pin, the pin is only for gpi or gpo.
> + GPIO pins have sequential, First half is gpo and second half is gpi.
> + GPIO pins can be programmed to support the following options
> + - Support interrupt option for each input port and various interrupt
> + sensitivity option (level-high, level-low, edge-high, edge-low)
> + - Directly connected to APB bus and its shift clock is from APB bus clock
> + divided by a programmable value.
> + - ngpios is number of nuvoton,input-ngpios GPIO lines and nuvoton,output-ngpios GPIO lines.
> + nuvoton,input-ngpios GPIO lines is only for gpi.
> + nuvoton,output-ngpios GPIO lines is only for gpo.
> +
> +properties:
> + compatible:
> + enum:
> + - nuvoton,npcm750-sgpio
> + - nuvoton,npcm845-sgpio
> +
> + reg:
> + maxItems: 1
> +
> + gpio-controller: true
> +
> + '#gpio-cells':
> + const: 2
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + nuvoton,input-ngpios: true
> +
> + nuvoton,output-ngpios: true
You did not solve previous comments. Fields cannot be just "true" but
need description, type and constraints. You need to solve previous comments.
> +
> + bus-frequency: true
This is a friendly reminder during the review process.
It seems my previous comments were not fully addressed. Maybe my
feedback got lost between the quotes, maybe you just forgot to apply it.
Please go back to the previous discussion and either implement all
requested changes or keep discussing them.
Thank you.
> +
> +required:
> + - compatible
> + - reg
> + - gpio-controller
> + - '#gpio-cells'
> + - interrupts
> + - nuvoton,input-ngpios
> + - nuvoton,output-ngpios
> + - clocks
> + - bus-frequency
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + gpio8: gpio@101000 {
> + compatible = "nuvoton,npcm750-sgpio";
> + reg = <0x101000 0x200>;
> + clocks = <&clk NPCM7XX_CLK_APB3>;
> + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> + bus-frequency = <16000000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + nuvoton,input-ngpios = <64>;
> + nuvoton,output-ngpios = <64>;
> + status = "disabled";
This is a friendly reminder during the review process.
It seems my previous comments were not fully addressed. Maybe my
feedback got lost between the quotes, maybe you just forgot to apply it.
Please go back to the previous discussion and either implement all
requested changes or keep discussing them.
Thank you.
> + };
Best regards,
Krzysztof
On Tue, 20 Dec 2022 16:01:39 +0800, Jim Liu wrote:
> Add dt-bindings document for the NPCM7xx sgpio driver
>
> Signed-off-by: Jim Liu <[email protected]>
> ---
> Changes for v3:
> - modify description
> - modify in/out property name
> Changes for v2:
> - modify description
> ---
> .../bindings/gpio/nuvoton,sgpio.yaml | 83 +++++++++++++++++++
> 1 file changed, 83 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml: properties:nuvoton,input-ngpios: True is not of type 'object'
hint: Vendor specific properties must have a type and description unless they have a defined, common suffix.
from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml: properties:nuvoton,input-ngpios: More than one condition true in oneOf schema:
{'description': 'Vendor specific properties must have a type and '
'description unless they have a defined, common '
'suffix.',
'oneOf': [{'additionalProperties': False,
'description': 'A vendor boolean property can use "type: '
'boolean"',
'properties': {'deprecated': True,
'description': True,
'type': {'const': 'boolean'}},
'required': ['type', 'description']},
{'additionalProperties': False,
'description': 'A vendor string property with exact values '
'has an implicit type',
'oneOf': [{'required': ['enum']}, {'required': ['const']}],
'properties': {'const': {'type': 'string'},
'deprecated': True,
'description': True,
'enum': {'items': {'type': 'string'}}},
'required': ['description']},
{'description': 'A vendor property needs a $ref to '
'types.yaml',
'oneOf': [{'required': ['$ref']}, {'required': ['allOf']}],
'properties': {'$ref': {'pattern': 'types.yaml#/definitions/'},
'allOf': {'items': [{'properties': {'$ref': {'pattern': 'types.yaml#/definitions/'}},
'required': ['$ref']}]}},
'required': ['description']},
{'description': 'A vendor property can have a $ref to a a '
'$defs schema',
'properties': {'$ref': {'pattern': '^#/(definitions|\\$defs)/'}},
'required': ['$ref']}],
'type': 'object'}
hint: Vendor specific properties must have a type and description unless they have a defined, common suffix.
from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml: properties:nuvoton,output-ngpios: True is not of type 'object'
hint: Vendor specific properties must have a type and description unless they have a defined, common suffix.
from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml: properties:nuvoton,output-ngpios: More than one condition true in oneOf schema:
{'description': 'Vendor specific properties must have a type and '
'description unless they have a defined, common '
'suffix.',
'oneOf': [{'additionalProperties': False,
'description': 'A vendor boolean property can use "type: '
'boolean"',
'properties': {'deprecated': True,
'description': True,
'type': {'const': 'boolean'}},
'required': ['type', 'description']},
{'additionalProperties': False,
'description': 'A vendor string property with exact values '
'has an implicit type',
'oneOf': [{'required': ['enum']}, {'required': ['const']}],
'properties': {'const': {'type': 'string'},
'deprecated': True,
'description': True,
'enum': {'items': {'type': 'string'}}},
'required': ['description']},
{'description': 'A vendor property needs a $ref to '
'types.yaml',
'oneOf': [{'required': ['$ref']}, {'required': ['allOf']}],
'properties': {'$ref': {'pattern': 'types.yaml#/definitions/'},
'allOf': {'items': [{'properties': {'$ref': {'pattern': 'types.yaml#/definitions/'}},
'required': ['$ref']}]}},
'required': ['description']},
{'description': 'A vendor property can have a $ref to a a '
'$defs schema',
'properties': {'$ref': {'pattern': '^#/(definitions|\\$defs)/'}},
'required': ['$ref']}],
'type': 'object'}
hint: Vendor specific properties must have a type and description unless they have a defined, common suffix.
from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml#
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.