From: Bjorn Andersson <[email protected]>
Define the pm8841 regulators under SMD/RPM, to allow the modem
remoteproc to set the voltage during boot of the remote processor.
Entries are just copied from the Honami dts.
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Luca Weiss <[email protected]>
---
Changes in v2:
* new patch in this series
...-msm8974pro-sony-xperia-shinano-castor.dts | 24 +++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
index 3f45f5c5d37b..2c33f84a6e4e 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
@@ -319,6 +319,30 @@ led@7 {
};
&rpm_requests {
+ pm8841-regulators {
+ compatible = "qcom,rpm-pm8841-regulators";
+
+ pm8841_s1: s1 {
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm8841_s2: s2 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm8841_s3: s3 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm8841_s4: s4 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+ };
+
pm8941-regulators {
compatible = "qcom,rpm-pm8941-regulators";
--
2.38.1
On 21.11.2022 22:22, Luca Weiss wrote:
> From: Bjorn Andersson <[email protected]>
>
> Define the pm8841 regulators under SMD/RPM, to allow the modem
> remoteproc to set the voltage during boot of the remote processor.
>
> Entries are just copied from the Honami dts.
I hope it was supposed to be "identical to" and not "copied and hoped it
would be ok" :/
Maybe I'm a bit picky, but I suppose this is said in a misleading way..
Konrad
>
> Signed-off-by: Bjorn Andersson <[email protected]>
> Signed-off-by: Luca Weiss <[email protected]>
> ---
> Changes in v2:
> * new patch in this series
>
> ...-msm8974pro-sony-xperia-shinano-castor.dts | 24 +++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
> index 3f45f5c5d37b..2c33f84a6e4e 100644
> --- a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
> +++ b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
> @@ -319,6 +319,30 @@ led@7 {
> };
>
> &rpm_requests {
> + pm8841-regulators {
> + compatible = "qcom,rpm-pm8841-regulators";
> +
> + pm8841_s1: s1 {
> + regulator-min-microvolt = <675000>;
> + regulator-max-microvolt = <1050000>;
> + };
> +
> + pm8841_s2: s2 {
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1050000>;
> + };
> +
> + pm8841_s3: s3 {
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1050000>;
> + };
> +
> + pm8841_s4: s4 {
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1050000>;
> + };
> + };
> +
> pm8941-regulators {
> compatible = "qcom,rpm-pm8941-regulators";
>
On Montag, 21. November 2022 23:32:22 CET Konrad Dybcio wrote:
> On 21.11.2022 22:22, Luca Weiss wrote:
> > From: Bjorn Andersson <[email protected]>
> >
> > Define the pm8841 regulators under SMD/RPM, to allow the modem
> > remoteproc to set the voltage during boot of the remote processor.
> >
> > Entries are just copied from the Honami dts.
>
> I hope it was supposed to be "identical to" and not "copied and hoped it
> would be ok" :/
Blame Bjorn from many years ago :P
But I just double checked and in some Sony msm8974 kernel sources I have on my
computer (https://github.com/rcstar6696/android_kernel_sony_msm8974 branch
cm-14.1) all Sony devices have the same values these pm8841 regulators, none
have it overriden from what I could find. So should be fine.
Regards
Luca
>
> Maybe I'm a bit picky, but I suppose this is said in a misleading way..
>
> Konrad
>
> > Signed-off-by: Bjorn Andersson <[email protected]>
> > Signed-off-by: Luca Weiss <[email protected]>
> > ---
> > Changes in v2:
> > * new patch in this series
> >
> > ...-msm8974pro-sony-xperia-shinano-castor.dts | 24 +++++++++++++++++++
> > 1 file changed, 24 insertions(+)
> >
> > diff --git
> > a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
> > b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts index
> > 3f45f5c5d37b..2c33f84a6e4e 100644
> > --- a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
> > +++ b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
> > @@ -319,6 +319,30 @@ led@7 {
> >
> > };
> >
> > &rpm_requests {
> >
> > + pm8841-regulators {
> > + compatible = "qcom,rpm-pm8841-regulators";
> > +
> > + pm8841_s1: s1 {
> > + regulator-min-microvolt = <675000>;
> > + regulator-max-microvolt = <1050000>;
> > + };
> > +
> > + pm8841_s2: s2 {
> > + regulator-min-microvolt = <500000>;
> > + regulator-max-microvolt = <1050000>;
> > + };
> > +
> > + pm8841_s3: s3 {
> > + regulator-min-microvolt = <500000>;
> > + regulator-max-microvolt = <1050000>;
> > + };
> > +
> > + pm8841_s4: s4 {
> > + regulator-min-microvolt = <500000>;
> > + regulator-max-microvolt = <1050000>;
> > + };
> > + };
> > +
> >
> > pm8941-regulators {
> >
> > compatible = "qcom,rpm-pm8941-regulators";
On Mon, 21 Nov 2022 22:22:25 +0100, Luca Weiss wrote:
> From: Bjorn Andersson <[email protected]>
>
> Define the pm8841 regulators under SMD/RPM, to allow the modem
> remoteproc to set the voltage during boot of the remote processor.
>
> Entries are just copied from the Honami dts.
>
> [...]
Applied, thanks!
[1/2] ARM: dts: msm8974: castor: Define pm8841 regulators
commit: a0145c557d94b3bac7c5a4545f90cfe940a226cd
[2/2] ARM: dts: qcom: msm8974-*: re-add remoteproc supplies
commit: 6d933c0ec1718a08b44689da0f79ac1d905db7dd
Best regards,
--
Bjorn Andersson <[email protected]>