Split common idp dtsi file into audio specific dtsi and common
idp dtsi file.
It is required to isolate idp and crd-rev3 platform device tree nodes
and convert crd-rev3 platform device tree nodes into audioreach specific
device tree nodes.
Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
Tested-by: Mohammad Rafi Shaik <[email protected]>
---
arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi | 135 +++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 1 +
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 126 -----------------------
3 files changed, 136 insertions(+), 126 deletions(-)
create mode 100644 arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi
diff --git a/arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi
new file mode 100644
index 0000000..d1aea28
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 Audio IDP board device tree source (common between SKU1 and SKU2)
+ *
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+/{
+ /* BOARD-SPECIFIC TOP LEVEL NODES */
+ sound: sound {
+ compatible = "google,sc7280-herobrine";
+ model = "sc7280-wcd938x-max98360a-1mic";
+
+ audio-routing =
+ "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC1", "MIC BIAS1",
+ "AMIC2", "MIC BIAS2",
+ "VA DMIC0", "MIC BIAS3",
+ "VA DMIC1", "MIC BIAS3",
+ "VA DMIC2", "MIC BIAS1",
+ "VA DMIC3", "MIC BIAS1",
+ "TX SWR_ADC0", "ADC1_OUTPUT",
+ "TX SWR_ADC1", "ADC2_OUTPUT",
+ "TX SWR_ADC2", "ADC3_OUTPUT",
+ "TX SWR_DMIC0", "DMIC1_OUTPUT",
+ "TX SWR_DMIC1", "DMIC2_OUTPUT",
+ "TX SWR_DMIC2", "DMIC3_OUTPUT",
+ "TX SWR_DMIC3", "DMIC4_OUTPUT",
+ "TX SWR_DMIC4", "DMIC5_OUTPUT",
+ "TX SWR_DMIC5", "DMIC6_OUTPUT",
+ "TX SWR_DMIC6", "DMIC7_OUTPUT",
+ "TX SWR_DMIC7", "DMIC8_OUTPUT";
+
+ qcom,msm-mbhc-hphl-swh = <1>;
+ qcom,msm-mbhc-gnd-swh = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <0>;
+
+ dai-link@0 {
+ link-name = "MAX98360A";
+ reg = <0>;
+
+ cpu {
+ sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+ };
+
+ codec {
+ sound-dai = <&max98360a>;
+ };
+ };
+
+ dai-link@1 {
+ link-name = "DisplayPort";
+ reg = <1>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_DP_RX>;
+ };
+
+ codec {
+ sound-dai = <&mdss_dp>;
+ };
+ };
+
+ dai-link@2 {
+ link-name = "WCD9385 Playback";
+ reg = <2>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>;
+ };
+
+ codec {
+ sound-dai = <&wcd9385 0>, <&swr0 0>, <&lpass_rx_macro 0>;
+ };
+ };
+
+ dai-link@3 {
+ link-name = "WCD9385 Capture";
+ reg = <3>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>;
+ };
+
+ codec {
+ sound-dai = <&wcd9385 1>, <&swr1 0>, <&lpass_tx_macro 0>;
+ };
+ };
+
+ dai-link@4 {
+ link-name = "DMIC";
+ reg = <4>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
+ };
+
+ codec {
+ sound-dai = <&lpass_va_macro 0>;
+ };
+ };
+ };
+};
+
+&lpass_cpu {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>;
+
+ dai-link@1 {
+ reg = <MI2S_SECONDARY>;
+ qcom,playback-sd-lines = <0>;
+ };
+
+ dai-link@5 {
+ reg = <LPASS_DP_RX>;
+ };
+
+ dai-link@6 {
+ reg = <LPASS_CDC_DMA_RX0>;
+ };
+
+ dai-link@19 {
+ reg = <LPASS_CDC_DMA_TX3>;
+ };
+
+ dai-link@25 {
+ reg = <LPASS_CDC_DMA_VA_TX0>;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
index 1185141..b024626 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include "sc7280-idp.dtsi"
+#include "sc7280-audio-idp.dtsi"
#include "sc7280-idp-ec-h1.dtsi"
/ {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index f7efb99..edec3ee 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -86,104 +86,6 @@
pinctrl-names = "default";
pinctrl-0 = <&nvme_pwren>;
};
-
- sound: sound {
- compatible = "google,sc7280-herobrine";
- model = "sc7280-wcd938x-max98360a-1mic";
-
- audio-routing =
- "IN1_HPHL", "HPHL_OUT",
- "IN2_HPHR", "HPHR_OUT",
- "AMIC1", "MIC BIAS1",
- "AMIC2", "MIC BIAS2",
- "VA DMIC0", "MIC BIAS3",
- "VA DMIC1", "MIC BIAS3",
- "VA DMIC2", "MIC BIAS1",
- "VA DMIC3", "MIC BIAS1",
- "TX SWR_ADC0", "ADC1_OUTPUT",
- "TX SWR_ADC1", "ADC2_OUTPUT",
- "TX SWR_ADC2", "ADC3_OUTPUT",
- "TX SWR_DMIC0", "DMIC1_OUTPUT",
- "TX SWR_DMIC1", "DMIC2_OUTPUT",
- "TX SWR_DMIC2", "DMIC3_OUTPUT",
- "TX SWR_DMIC3", "DMIC4_OUTPUT",
- "TX SWR_DMIC4", "DMIC5_OUTPUT",
- "TX SWR_DMIC5", "DMIC6_OUTPUT",
- "TX SWR_DMIC6", "DMIC7_OUTPUT",
- "TX SWR_DMIC7", "DMIC8_OUTPUT";
-
- qcom,msm-mbhc-hphl-swh = <1>;
- qcom,msm-mbhc-gnd-swh = <1>;
-
- #address-cells = <1>;
- #size-cells = <0>;
- #sound-dai-cells = <0>;
-
- dai-link@0 {
- link-name = "MAX98360A";
- reg = <0>;
-
- cpu {
- sound-dai = <&lpass_cpu MI2S_SECONDARY>;
- };
-
- codec {
- sound-dai = <&max98360a>;
- };
- };
-
- dai-link@1 {
- link-name = "DisplayPort";
- reg = <1>;
-
- cpu {
- sound-dai = <&lpass_cpu LPASS_DP_RX>;
- };
-
- codec {
- sound-dai = <&mdss_dp>;
- };
- };
-
- dai-link@2 {
- link-name = "WCD9385 Playback";
- reg = <2>;
-
- cpu {
- sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>;
- };
-
- codec {
- sound-dai = <&wcd9385 0>, <&swr0 0>, <&lpass_rx_macro 0>;
- };
- };
-
- dai-link@3 {
- link-name = "WCD9385 Capture";
- reg = <3>;
-
- cpu {
- sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>;
- };
-
- codec {
- sound-dai = <&wcd9385 1>, <&swr1 0>, <&lpass_tx_macro 0>;
- };
- };
-
- dai-link@4 {
- link-name = "DMIC";
- reg = <4>;
-
- cpu {
- sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
- };
-
- codec {
- sound-dai = <&lpass_va_macro 0>;
- };
- };
- };
};
&apps_rsc {
@@ -381,34 +283,6 @@
modem-init;
};
-&lpass_cpu {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>;
-
- dai-link@1 {
- reg = <MI2S_SECONDARY>;
- qcom,playback-sd-lines = <0>;
- };
-
- dai-link@5 {
- reg = <LPASS_DP_RX>;
- };
-
- dai-link@6 {
- reg = <LPASS_CDC_DMA_RX0>;
- };
-
- dai-link@19 {
- reg = <LPASS_CDC_DMA_TX3>;
- };
-
- dai-link@25 {
- reg = <LPASS_CDC_DMA_VA_TX0>;
- };
-};
-
&lpass_rx_macro {
status = "okay";
};
--
2.7.4
On 05/01/2023 14:37, Srinivasa Rao Mandadapu wrote:
> Split common idp dtsi file into audio specific dtsi and common
> idp dtsi file.
>
> It is required to isolate idp and crd-rev3 platform device tree nodes
> and convert crd-rev3 platform device tree nodes into audioreach specific
> device tree nodes.
>
> Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
> Tested-by: Mohammad Rafi Shaik <[email protected]>
> ---
Please include a changelog - either per patch or in cover letter.
> arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi | 135 +++++++++++++++++++++++++
> arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 1 +
> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 126 -----------------------
> 3 files changed, 136 insertions(+), 126 deletions(-)
> create mode 100644 arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi
> new file mode 100644
> index 0000000..d1aea28
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi
> @@ -0,0 +1,135 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * sc7280 Audio IDP board device tree source (common between SKU1 and SKU2)
> + *
> + * Copyright (c) 2022, The Linux Foundation. All rights reserved.
> + */
> +
> +/{
> + /* BOARD-SPECIFIC TOP LEVEL NODES */
Still wrong indentation.
> + sound: sound {
> + compatible = "google,sc7280-herobrine";
> + model = "sc7280-wcd938x-max98360a-1mic";
> +
Best regards,
Krzysztof
On 1/10/2023 4:27 PM, Krzysztof Kozlowski wrote:
Thanks for your time Krzysztof!!!
> On 05/01/2023 14:37, Srinivasa Rao Mandadapu wrote:
>> Split common idp dtsi file into audio specific dtsi and common
>> idp dtsi file.
>>
>> It is required to isolate idp and crd-rev3 platform device tree nodes
>> and convert crd-rev3 platform device tree nodes into audioreach specific
>> device tree nodes.
>>
>> Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
>> Tested-by: Mohammad Rafi Shaik <[email protected]>
>> ---
> Please include a changelog - either per patch or in cover letter.
Okay. Will include and re post it.
>
>> arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi | 135 +++++++++++++++++++++++++
>> arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 1 +
>> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 126 -----------------------
>> 3 files changed, 136 insertions(+), 126 deletions(-)
>> create mode 100644 arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi
>> new file mode 100644
>> index 0000000..d1aea28
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi
>> @@ -0,0 +1,135 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * sc7280 Audio IDP board device tree source (common between SKU1 and SKU2)
>> + *
>> + * Copyright (c) 2022, The Linux Foundation. All rights reserved.
>> + */
>> +
>> +/{
>> + /* BOARD-SPECIFIC TOP LEVEL NODES */
> Still wrong indentation.
Okay. Will fix it.
>
>> + sound: sound {
>> + compatible = "google,sc7280-herobrine";
>> + model = "sc7280-wcd938x-max98360a-1mic";
>> +
>
>
>
> Best regards,
> Krzysztof
>