LinuxLists.cc - [PATCH] clocksource/drivers/timer-mediatek: Split out CPUXGPT timers

2023-03-09 10:41:24

Subject: [PATCH] clocksource/drivers/timer-mediatek: Split out CPUXGPT timers

On MediaTek platforms, CPUXGPT is the source for the AArch64 System
Timer, read through CNTVCT_EL0.

The handling for starting this timer ASAP was introduced in commit
327e93cf9a59 ("clocksource/drivers/timer-mediatek: Implement CPUXGPT timers")
which description also contains an important full explanation of the
reasons why this driver is necessary and cannot be a module.

In preparation for an eventual conversion of timer-mediatek to a
platform_driver that would be possibly built as a module, split out
the CPUXGPT timers driver to a new timer-mediatek-cpux.c driver.

This commit brings no functional changes.

Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
---

Note: I've added a mention to the commit that is introducing CPUXGPT
because it contains a broad explanation about why this is needed and
why it is mandatory to have it as built-in and initialized as early
as possible. This is mostly because this question was asked multiple
times and I've been pointing people to that commit to explain it all.

This commit was made because of a discussion about the impossibility
to convert timer-mediatek to a module: even though that's definitely
not easy at all, this will make sure that whatever cannot (ever) be
built as module goes out of that driver.

I tried to tackle a timer-mediatek conversion to platform_driver as
well, but I don't currently have the required bandwidth to do so:
as a first step I moved that, so I'm pushing this commit as to try
to reduce duplicated work.

This commit was tested on MT6795 Sony Xperia M5.

drivers/clocksource/Kconfig | 9 ++
drivers/clocksource/Makefile | 1 +
drivers/clocksource/timer-mediatek-cpux.c | 140 ++++++++++++++++++++++
drivers/clocksource/timer-mediatek.c | 114 ------------------
4 files changed, 150 insertions(+), 114 deletions(-)
create mode 100644 drivers/clocksource/timer-mediatek-cpux.c

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 5fc8f0e7fb38..526382dc7482 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -479,6 +479,15 @@ config MTK_TIMER
help
Support for Mediatek timer driver.

+config MTK_CPUX_TIMER
+ bool "MediaTek CPUX timer driver" if COMPILE_TEST
+ depends on HAS_IOMEM
+ default ARCH_MEDIATEK
+ select TIMER_OF
+ select CLKSRC_MMIO
+ help
+ Support for MediaTek CPUXGPT timer driver.
+
config SPRD_TIMER
bool "Spreadtrum timer driver" if EXPERT
depends on HAS_IOMEM
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 64ab547de97b..f12d3987a960 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_FSL_FTM_TIMER) += timer-fsl-ftm.o
obj-$(CONFIG_VF_PIT_TIMER) += timer-vf-pit.o
obj-$(CONFIG_CLKSRC_QCOM) += timer-qcom.o
obj-$(CONFIG_MTK_TIMER) += timer-mediatek.o
+obj-$(CONFIG_MTK_CPUX_TIMER) += timer-mediatek-cpux.o
obj-$(CONFIG_CLKSRC_PISTACHIO) += timer-pistachio.o
obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o
obj-$(CONFIG_OXNAS_RPS_TIMER) += timer-oxnas-rps.o
diff --git a/drivers/clocksource/timer-mediatek-cpux.c b/drivers/clocksource/timer-mediatek-cpux.c
new file mode 100644
index 000000000000..a8e3df4c09fd
--- /dev/null
+++ b/drivers/clocksource/timer-mediatek-cpux.c
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MediaTek SoCs CPUX General Purpose Timer handling
+ *
+ * Based on timer-mediatek.c:
+ * Copyright (C) 2014 Matthias Brugger <[email protected]>
+ *
+ * Copyright (C) 2022 Collabora Ltd.
+ * AngeloGioacchino Del Regno <[email protected]>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/irqreturn.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+#include "timer-of.h"
+
+#define TIMER_SYNC_TICKS 3
+
+/* cpux mcusys wrapper */
+#define CPUX_CON_REG 0x0
+#define CPUX_IDX_REG 0x4
+
+/* cpux */
+#define CPUX_IDX_GLOBAL_CTRL 0x0
+ #define CPUX_ENABLE BIT(0)
+ #define CPUX_CLK_DIV_MASK GENMASK(10, 8)
+ #define CPUX_CLK_DIV1 BIT(8)
+ #define CPUX_CLK_DIV2 BIT(9)
+ #define CPUX_CLK_DIV4 BIT(10)
+#define CPUX_IDX_GLOBAL_IRQ 0x30
+
+static u32 mtk_cpux_readl(u32 reg_idx, struct timer_of *to)
+{
+ writel(reg_idx, timer_of_base(to) + CPUX_IDX_REG);
+ return readl(timer_of_base(to) + CPUX_CON_REG);
+}
+
+static void mtk_cpux_writel(u32 val, u32 reg_idx, struct timer_of *to)
+{
+ writel(reg_idx, timer_of_base(to) + CPUX_IDX_REG);
+ writel(val, timer_of_base(to) + CPUX_CON_REG);
+}
+
+static void mtk_cpux_set_irq(struct timer_of *to, bool enable)
+{
+ const unsigned long *irq_mask = cpumask_bits(cpu_possible_mask);
+ u32 val;
+
+ val = mtk_cpux_readl(CPUX_IDX_GLOBAL_IRQ, to);
+
+ if (enable)
+ val |= *irq_mask;
+ else
+ val &= ~(*irq_mask);
+
+ mtk_cpux_writel(val, CPUX_IDX_GLOBAL_IRQ, to);
+}
+
+static int mtk_cpux_clkevt_shutdown(struct clock_event_device *clkevt)
+{
+ /* Clear any irq */
+ mtk_cpux_set_irq(to_timer_of(clkevt), false);
+
+ /*
+ * Disabling CPUXGPT timer will crash the platform, especially
+ * if Trusted Firmware is using it (usually, for sleep states),
+ * so we only mask the IRQ and call it a day.
+ */
+ return 0;
+}
+
+static int mtk_cpux_clkevt_resume(struct clock_event_device *clkevt)
+{
+ mtk_cpux_set_irq(to_timer_of(clkevt), true);
+ return 0;
+}
+
+static struct timer_of to = {
+ /*
+ * There are per-cpu interrupts for the CPUX General Purpose Timer
+ * but since this timer feeds the AArch64 System Timer we can rely
+ * on the CPU timer PPIs as well, so we don't declare TIMER_OF_IRQ.
+ */
+ .flags = TIMER_OF_BASE | TIMER_OF_CLOCK,
+
+ .clkevt = {
+ .name = "mtk-cpuxgpt",
+ .cpumask = cpu_possible_mask,
+ .rating = 10,
+ .set_state_shutdown = mtk_cpux_clkevt_shutdown,
+ .tick_resume = mtk_cpux_clkevt_resume,
+ },
+};
+
+static int __init mtk_cpux_init(struct device_node *node)
+{
+ u32 freq, val;
+ int ret;
+
+ /* If this fails, bad things are about to happen... */
+ ret = timer_of_init(node, &to);
+ if (ret) {
+ WARN(1, "Cannot start CPUX timers.\n");
+ return ret;
+ }
+
+ /*
+ * Check if we're given a clock with the right frequency for this
+ * timer, otherwise warn but keep going with the setup anyway, as
+ * that makes it possible to still boot the kernel, even though
+ * it may not work correctly (random lockups, etc).
+ * The reason behind this is that having an early UART may not be
+ * possible for everyone and this gives a chance to retrieve kmsg
+ * for eventual debugging even on consumer devices.
+ */
+ freq = timer_of_rate(&to);
+ if (freq > 13000000)
+ WARN(1, "Requested unsupported timer frequency %u\n", freq);
+
+ /* Clock input is 26MHz, set DIV2 to achieve 13MHz clock */
+ val = mtk_cpux_readl(CPUX_IDX_GLOBAL_CTRL, &to);
+ val &= ~CPUX_CLK_DIV_MASK;
+ val |= CPUX_CLK_DIV2;
+ mtk_cpux_writel(val, CPUX_IDX_GLOBAL_CTRL, &to);
+
+ /* Enable all CPUXGPT timers */
+ val = mtk_cpux_readl(CPUX_IDX_GLOBAL_CTRL, &to);
+ mtk_cpux_writel(val | CPUX_ENABLE, CPUX_IDX_GLOBAL_CTRL, &to);
+
+ clockevents_config_and_register(&to.clkevt, timer_of_rate(&to),
+ TIMER_SYNC_TICKS, 0xffffffff);
+
+ return 0;
+}
+TIMER_OF_DECLARE(mtk_mt6795, "mediatek,mt6795-systimer", mtk_cpux_init);
diff --git a/drivers/clocksource/timer-mediatek.c b/drivers/clocksource/timer-mediatek.c
index d5b29fd03ca2..7bcb4a3f26fb 100644
--- a/drivers/clocksource/timer-mediatek.c
+++ b/drivers/clocksource/timer-mediatek.c
@@ -22,19 +22,6 @@

#define TIMER_SYNC_TICKS (3)

-/* cpux mcusys wrapper */
-#define CPUX_CON_REG 0x0
-#define CPUX_IDX_REG 0x4
-
-/* cpux */
-#define CPUX_IDX_GLOBAL_CTRL 0x0
- #define CPUX_ENABLE BIT(0)
- #define CPUX_CLK_DIV_MASK GENMASK(10, 8)
- #define CPUX_CLK_DIV1 BIT(8)
- #define CPUX_CLK_DIV2 BIT(9)
- #define CPUX_CLK_DIV4 BIT(10)
-#define CPUX_IDX_GLOBAL_IRQ 0x30
-
/* gpt */
#define GPT_IRQ_EN_REG 0x00
#define GPT_IRQ_ENABLE(val) BIT((val) - 1)
@@ -85,52 +72,6 @@

static void __iomem *gpt_sched_reg __read_mostly;

-static u32 mtk_cpux_readl(u32 reg_idx, struct timer_of *to)
-{
- writel(reg_idx, timer_of_base(to) + CPUX_IDX_REG);
- return readl(timer_of_base(to) + CPUX_CON_REG);
-}
-
-static void mtk_cpux_writel(u32 val, u32 reg_idx, struct timer_of *to)
-{
- writel(reg_idx, timer_of_base(to) + CPUX_IDX_REG);
- writel(val, timer_of_base(to) + CPUX_CON_REG);
-}
-
-static void mtk_cpux_set_irq(struct timer_of *to, bool enable)
-{
- const unsigned long *irq_mask = cpumask_bits(cpu_possible_mask);
- u32 val;
-
- val = mtk_cpux_readl(CPUX_IDX_GLOBAL_IRQ, to);
-
- if (enable)
- val |= *irq_mask;
- else
- val &= ~(*irq_mask);
-
- mtk_cpux_writel(val, CPUX_IDX_GLOBAL_IRQ, to);
-}
-
-static int mtk_cpux_clkevt_shutdown(struct clock_event_device *clkevt)
-{
- /* Clear any irq */
- mtk_cpux_set_irq(to_timer_of(clkevt), false);
-
- /*
- * Disabling CPUXGPT timer will crash the platform, especially
- * if Trusted Firmware is using it (usually, for sleep states),
- * so we only mask the IRQ and call it a day.
- */
- return 0;
-}
-
-static int mtk_cpux_clkevt_resume(struct clock_event_device *clkevt)
-{
- mtk_cpux_set_irq(to_timer_of(clkevt), true);
- return 0;
-}
-
static void mtk_syst_ack_irq(struct timer_of *to)
{
/* Clear and disable interrupt */
@@ -340,60 +281,6 @@ static struct timer_of to = {
},
};

-static int __init mtk_cpux_init(struct device_node *node)
-{
- static struct timer_of to_cpux;
- u32 freq, val;
- int ret;
-
- /*
- * There are per-cpu interrupts for the CPUX General Purpose Timer
- * but since this timer feeds the AArch64 System Timer we can rely
- * on the CPU timer PPIs as well, so we don't declare TIMER_OF_IRQ.
- */
- to_cpux.flags = TIMER_OF_BASE | TIMER_OF_CLOCK;
- to_cpux.clkevt.name = "mtk-cpuxgpt";
- to_cpux.clkevt.rating = 10;
- to_cpux.clkevt.cpumask = cpu_possible_mask;
- to_cpux.clkevt.set_state_shutdown = mtk_cpux_clkevt_shutdown;
- to_cpux.clkevt.tick_resume = mtk_cpux_clkevt_resume;
-
- /* If this fails, bad things are about to happen... */
- ret = timer_of_init(node, &to_cpux);
- if (ret) {
- WARN(1, "Cannot start CPUX timers.\n");
- return ret;
- }
-
- /*
- * Check if we're given a clock with the right frequency for this
- * timer, otherwise warn but keep going with the setup anyway, as
- * that makes it possible to still boot the kernel, even though
- * it may not work correctly (random lockups, etc).
- * The reason behind this is that having an early UART may not be
- * possible for everyone and this gives a chance to retrieve kmsg
- * for eventual debugging even on consumer devices.
- */
- freq = timer_of_rate(&to_cpux);
- if (freq > 13000000)
- WARN(1, "Requested unsupported timer frequency %u\n", freq);
-
- /* Clock input is 26MHz, set DIV2 to achieve 13MHz clock */
- val = mtk_cpux_readl(CPUX_IDX_GLOBAL_CTRL, &to_cpux);
- val &= ~CPUX_CLK_DIV_MASK;
- val |= CPUX_CLK_DIV2;
- mtk_cpux_writel(val, CPUX_IDX_GLOBAL_CTRL, &to_cpux);
-
- /* Enable all CPUXGPT timers */
- val = mtk_cpux_readl(CPUX_IDX_GLOBAL_CTRL, &to_cpux);
- mtk_cpux_writel(val | CPUX_ENABLE, CPUX_IDX_GLOBAL_CTRL, &to_cpux);
-
- clockevents_config_and_register(&to_cpux.clkevt, timer_of_rate(&to_cpux),
- TIMER_SYNC_TICKS, 0xffffffff);
-
- return 0;
-}
-
static int __init mtk_syst_init(struct device_node *node)
{
int ret;
@@ -452,4 +339,3 @@ static int __init mtk_gpt_init(struct device_node *node)
}
TIMER_OF_DECLARE(mtk_mt6577, "mediatek,mt6577-timer", mtk_gpt_init);
TIMER_OF_DECLARE(mtk_mt6765, "mediatek,mt6765-timer", mtk_syst_init);
-TIMER_OF_DECLARE(mtk_mt6795, "mediatek,mt6795-systimer", mtk_cpux_init);
--
2.39.2

2023-03-29 07:53:36

by Walter Chang (張維哲)

[permalink] [raw]

Subject: Re: [PATCH] clocksource/drivers/timer-mediatek: Split out CPUXGPT timers

On Thu, 2023-03-09 at 11:39 +0100, AngeloGioacchino Del Regno wrote:
> On MediaTek platforms, CPUXGPT is the source for the AArch64 System
> Timer, read through CNTVCT_EL0.
>
> The handling for starting this timer ASAP was introduced in commit
> 327e93cf9a59 ("clocksource/drivers/timer-mediatek: Implement CPUXGPT
> timers")
> which description also contains an important full explanation of the
> reasons why this driver is necessary and cannot be a module.
>
> In preparation for an eventual conversion of timer-mediatek to a
> platform_driver that would be possibly built as a module, split out
> the CPUXGPT timers driver to a new timer-mediatek-cpux.c driver.
>
> This commit brings no functional changes.
>
> Signed-off-by: AngeloGioacchino Del Regno <
> [email protected]>
> ---
>
> Note: I've added a mention to the commit that is introducing CPUXGPT
> because it contains a broad explanation about why this is needed and
> why it is mandatory to have it as built-in and initialized as early
> as possible. This is mostly because this question was asked multiple
> times and I've been pointing people to that commit to explain it all.
>
> This commit was made because of a discussion about the impossibility
> to convert timer-mediatek to a module: even though that's definitely
> not easy at all, this will make sure that whatever cannot (ever) be
> built as module goes out of that driver.
>
> I tried to tackle a timer-mediatek conversion to platform_driver as
> well, but I don't currently have the required bandwidth to do so:
> as a first step I moved that, so I'm pushing this commit as to try
> to reduce duplicated work.
>
> This commit was tested on MT6795 Sony Xperia M5.
>
> drivers/clocksource/Kconfig | 9 ++
> drivers/clocksource/Makefile | 1 +
> drivers/clocksource/timer-mediatek-cpux.c | 140
> ++++++++++++++++++++++
> drivers/clocksource/timer-mediatek.c | 114 ------------------
> 4 files changed, 150 insertions(+), 114 deletions(-)
> create mode 100644 drivers/clocksource/timer-mediatek-cpux.c
>
> diff --git a/drivers/clocksource/Kconfig
> b/drivers/clocksource/Kconfig
> index 5fc8f0e7fb38..526382dc7482 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -479,6 +479,15 @@ config MTK_TIMER
> help
> Support for Mediatek timer driver.
>
> +config MTK_CPUX_TIMER
> + bool "MediaTek CPUX timer driver" if COMPILE_TEST
> + depends on HAS_IOMEM
> + default ARCH_MEDIATEK
> + select TIMER_OF
> + select CLKSRC_MMIO
> + help
> + Support for MediaTek CPUXGPT timer driver.
> +
> config SPRD_TIMER
> bool "Spreadtrum timer driver" if EXPERT
> depends on HAS_IOMEM
> diff --git a/drivers/clocksource/Makefile
> b/drivers/clocksource/Makefile
> index 64ab547de97b..f12d3987a960 100644
> --- a/drivers/clocksource/Makefile
> +++ b/drivers/clocksource/Makefile
> @@ -51,6 +51,7 @@ obj-$(CONFIG_FSL_FTM_TIMER) += timer-fsl-ftm.o
> obj-$(CONFIG_VF_PIT_TIMER) += timer-vf-pit.o
> obj-$(CONFIG_CLKSRC_QCOM) += timer-qcom.o
> obj-$(CONFIG_MTK_TIMER) += timer-mediatek.o
> +obj-$(CONFIG_MTK_CPUX_TIMER) += timer-mediatek-cpux.o
> obj-$(CONFIG_CLKSRC_PISTACHIO) += timer-pistachio.o
> obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o
> obj-$(CONFIG_OXNAS_RPS_TIMER) += timer-oxnas-rps.o
> diff --git a/drivers/clocksource/timer-mediatek-cpux.c
> b/drivers/clocksource/timer-mediatek-cpux.c
> new file mode 100644
> index 000000000000..a8e3df4c09fd
> --- /dev/null
> +++ b/drivers/clocksource/timer-mediatek-cpux.c
> @@ -0,0 +1,140 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * MediaTek SoCs CPUX General Purpose Timer handling
> + *
> + * Based on timer-mediatek.c:
> + * Copyright (C) 2014 Matthias Brugger <[email protected]>
> + *
> + * Copyright (C) 2022 Collabora Ltd.
> + * AngeloGioacchino Del Regno <
> [email protected]>
> + */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> +#include <linux/clockchips.h>
> +#include <linux/clocksource.h>
> +#include <linux/interrupt.h>
> +#include <linux/irqreturn.h>
> +#include <linux/sched_clock.h>
> +#include <linux/slab.h>
> +#include "timer-of.h"
> +
> +#define TIMER_SYNC_TICKS 3
> +
> +/* cpux mcusys wrapper */
> +#define CPUX_CON_REG 0x0
> +#define CPUX_IDX_REG 0x4
> +
> +/* cpux */
> +#define CPUX_IDX_GLOBAL_CTRL 0x0
> + #define CPUX_ENABLE BIT(0)
> + #define CPUX_CLK_DIV_MASK GENMASK(10, 8)
> + #define CPUX_CLK_DIV1 BIT(8)
> + #define CPUX_CLK_DIV2 BIT(9)
> + #define CPUX_CLK_DIV4 BIT(10)
> +#define CPUX_IDX_GLOBAL_IRQ 0x30
> +
> +static u32 mtk_cpux_readl(u32 reg_idx, struct timer_of *to)
> +{
> + writel(reg_idx, timer_of_base(to) + CPUX_IDX_REG);
> + return readl(timer_of_base(to) + CPUX_CON_REG);
> +}
> +
> +static void mtk_cpux_writel(u32 val, u32 reg_idx, struct timer_of
> *to)
> +{
> + writel(reg_idx, timer_of_base(to) + CPUX_IDX_REG);
> + writel(val, timer_of_base(to) + CPUX_CON_REG);
> +}
> +
> +static void mtk_cpux_set_irq(struct timer_of *to, bool enable)
> +{
> + const unsigned long *irq_mask =
> cpumask_bits(cpu_possible_mask);
> + u32 val;
> +
> + val = mtk_cpux_readl(CPUX_IDX_GLOBAL_IRQ, to);
> +
> + if (enable)
> + val |= *irq_mask;
> + else
> + val &= ~(*irq_mask);
> +
> + mtk_cpux_writel(val, CPUX_IDX_GLOBAL_IRQ, to);
> +}
> +
> +static int mtk_cpux_clkevt_shutdown(struct clock_event_device
> *clkevt)
> +{
> + /* Clear any irq */
> + mtk_cpux_set_irq(to_timer_of(clkevt), false);
> +
> + /*
> + * Disabling CPUXGPT timer will crash the platform, especially
> + * if Trusted Firmware is using it (usually, for sleep states),
> + * so we only mask the IRQ and call it a day.
> + */
> + return 0;
> +}
> +
> +static int mtk_cpux_clkevt_resume(struct clock_event_device *clkevt)
> +{
> + mtk_cpux_set_irq(to_timer_of(clkevt), true);
> + return 0;
> +}
> +
> +static struct timer_of to = {
> + /*
> + * There are per-cpu interrupts for the CPUX General Purpose
> Timer
> + * but since this timer feeds the AArch64 System Timer we can
> rely
> + * on the CPU timer PPIs as well, so we don't declare
> TIMER_OF_IRQ.
> + */
> + .flags = TIMER_OF_BASE | TIMER_OF_CLOCK,
> +
> + .clkevt = {
> + .name = "mtk-cpuxgpt",
> + .cpumask = cpu_possible_mask,
> + .rating = 10,
> + .set_state_shutdown = mtk_cpux_clkevt_shutdown,
> + .tick_resume = mtk_cpux_clkevt_resume,
> + },
> +};
> +
> +static int __init mtk_cpux_init(struct device_node *node)
> +{
> + u32 freq, val;
> + int ret;
> +
> + /* If this fails, bad things are about to happen... */
> + ret = timer_of_init(node, &to);
> + if (ret) {
> + WARN(1, "Cannot start CPUX timers.\n");
> + return ret;
> + }
> +
> + /*
> + * Check if we're given a clock with the right frequency for
> this
> + * timer, otherwise warn but keep going with the setup anyway,
> as
> + * that makes it possible to still boot the kernel, even though
> + * it may not work correctly (random lockups, etc).
> + * The reason behind this is that having an early UART may not
> be
> + * possible for everyone and this gives a chance to retrieve
> kmsg
> + * for eventual debugging even on consumer devices.
> + */
> + freq = timer_of_rate(&to);
> + if (freq > 13000000)
> + WARN(1, "Requested unsupported timer frequency %u\n",
> freq);
> +
> + /* Clock input is 26MHz, set DIV2 to achieve 13MHz clock */
> + val = mtk_cpux_readl(CPUX_IDX_GLOBAL_CTRL, &to);
> + val &= ~CPUX_CLK_DIV_MASK;
> + val |= CPUX_CLK_DIV2;
> + mtk_cpux_writel(val, CPUX_IDX_GLOBAL_CTRL, &to);
> +
> + /* Enable all CPUXGPT timers */
> + val = mtk_cpux_readl(CPUX_IDX_GLOBAL_CTRL, &to);
> + mtk_cpux_writel(val | CPUX_ENABLE, CPUX_IDX_GLOBAL_CTRL, &to);
> +
> + clockevents_config_and_register(&to.clkevt, timer_of_rate(&to),
> + TIMER_SYNC_TICKS, 0xffffffff);
> +
> + return 0;
> +}
> +TIMER_OF_DECLARE(mtk_mt6795, "mediatek,mt6795-systimer",
> mtk_cpux_init);
> diff --git a/drivers/clocksource/timer-mediatek.c
> b/drivers/clocksource/timer-mediatek.c
> index d5b29fd03ca2..7bcb4a3f26fb 100644
> --- a/drivers/clocksource/timer-mediatek.c
> +++ b/drivers/clocksource/timer-mediatek.c
> @@ -22,19 +22,6 @@
>
> #define TIMER_SYNC_TICKS (3)
>
> -/* cpux mcusys wrapper */
> -#define CPUX_CON_REG 0x0
> -#define CPUX_IDX_REG 0x4
> -
> -/* cpux */
> -#define CPUX_IDX_GLOBAL_CTRL 0x0
> - #define CPUX_ENABLE BIT(0)
> - #define CPUX_CLK_DIV_MASK GENMASK(10, 8)
> - #define CPUX_CLK_DIV1 BIT(8)
> - #define CPUX_CLK_DIV2 BIT(9)
> - #define CPUX_CLK_DIV4 BIT(10)
> -#define CPUX_IDX_GLOBAL_IRQ 0x30
> -
> /* gpt */
> #define GPT_IRQ_EN_REG 0x00
> #define GPT_IRQ_ENABLE(val) BIT((val) - 1)
> @@ -85,52 +72,6 @@
>
> static void __iomem *gpt_sched_reg __read_mostly;
>
> -static u32 mtk_cpux_readl(u32 reg_idx, struct timer_of *to)
> -{
> - writel(reg_idx, timer_of_base(to) + CPUX_IDX_REG);
> - return readl(timer_of_base(to) + CPUX_CON_REG);
> -}
> -
> -static void mtk_cpux_writel(u32 val, u32 reg_idx, struct timer_of
> *to)
> -{
> - writel(reg_idx, timer_of_base(to) + CPUX_IDX_REG);
> - writel(val, timer_of_base(to) + CPUX_CON_REG);
> -}
> -
> -static void mtk_cpux_set_irq(struct timer_of *to, bool enable)
> -{
> - const unsigned long *irq_mask =
> cpumask_bits(cpu_possible_mask);
> - u32 val;
> -
> - val = mtk_cpux_readl(CPUX_IDX_GLOBAL_IRQ, to);
> -
> - if (enable)
> - val |= *irq_mask;
> - else
> - val &= ~(*irq_mask);
> -
> - mtk_cpux_writel(val, CPUX_IDX_GLOBAL_IRQ, to);
> -}
> -
> -static int mtk_cpux_clkevt_shutdown(struct clock_event_device
> *clkevt)
> -{
> - /* Clear any irq */
> - mtk_cpux_set_irq(to_timer_of(clkevt), false);
> -
> - /*
> - * Disabling CPUXGPT timer will crash the platform, especially
> - * if Trusted Firmware is using it (usually, for sleep states),
> - * so we only mask the IRQ and call it a day.
> - */
> - return 0;
> -}
> -
> -static int mtk_cpux_clkevt_resume(struct clock_event_device *clkevt)
> -{
> - mtk_cpux_set_irq(to_timer_of(clkevt), true);
> - return 0;
> -}
> -
> static void mtk_syst_ack_irq(struct timer_of *to)
> {
> /* Clear and disable interrupt */
> @@ -340,60 +281,6 @@ static struct timer_of to = {
> },
> };
>
> -static int __init mtk_cpux_init(struct device_node *node)
> -{
> - static struct timer_of to_cpux;
> - u32 freq, val;
> - int ret;
> -
> - /*
> - * There are per-cpu interrupts for the CPUX General Purpose
> Timer
> - * but since this timer feeds the AArch64 System Timer we can
> rely
> - * on the CPU timer PPIs as well, so we don't declare
> TIMER_OF_IRQ.
> - */
> - to_cpux.flags = TIMER_OF_BASE | TIMER_OF_CLOCK;
> - to_cpux.clkevt.name = "mtk-cpuxgpt";
> - to_cpux.clkevt.rating = 10;
> - to_cpux.clkevt.cpumask = cpu_possible_mask;
> - to_cpux.clkevt.set_state_shutdown = mtk_cpux_clkevt_shutdown;
> - to_cpux.clkevt.tick_resume = mtk_cpux_clkevt_resume;
> -
> - /* If this fails, bad things are about to happen... */
> - ret = timer_of_init(node, &to_cpux);
> - if (ret) {
> - WARN(1, "Cannot start CPUX timers.\n");
> - return ret;
> - }
> -
> - /*
> - * Check if we're given a clock with the right frequency for
> this
> - * timer, otherwise warn but keep going with the setup anyway,
> as
> - * that makes it possible to still boot the kernel, even though
> - * it may not work correctly (random lockups, etc).
> - * The reason behind this is that having an early UART may not
> be
> - * possible for everyone and this gives a chance to retrieve
> kmsg
> - * for eventual debugging even on consumer devices.
> - */
> - freq = timer_of_rate(&to_cpux);
> - if (freq > 13000000)
> - WARN(1, "Requested unsupported timer frequency %u\n",
> freq);
> -
> - /* Clock input is 26MHz, set DIV2 to achieve 13MHz clock */
> - val = mtk_cpux_readl(CPUX_IDX_GLOBAL_CTRL, &to_cpux);
> - val &= ~CPUX_CLK_DIV_MASK;
> - val |= CPUX_CLK_DIV2;
> - mtk_cpux_writel(val, CPUX_IDX_GLOBAL_CTRL, &to_cpux);
> -
> - /* Enable all CPUXGPT timers */
> - val = mtk_cpux_readl(CPUX_IDX_GLOBAL_CTRL, &to_cpux);
> - mtk_cpux_writel(val | CPUX_ENABLE, CPUX_IDX_GLOBAL_CTRL,
> &to_cpux);
> -
> - clockevents_config_and_register(&to_cpux.clkevt,
> timer_of_rate(&to_cpux),
> - TIMER_SYNC_TICKS, 0xffffffff);
> -
> - return 0;
> -}
> -
> static int __init mtk_syst_init(struct device_node *node)
> {
> int ret;
> @@ -452,4 +339,3 @@ static int __init mtk_gpt_init(struct device_node
> *node)
> }
> TIMER_OF_DECLARE(mtk_mt6577, "mediatek,mt6577-timer", mtk_gpt_init);
> TIMER_OF_DECLARE(mtk_mt6765, "mediatek,mt6765-timer",
> mtk_syst_init);
> -TIMER_OF_DECLARE(mtk_mt6795, "mediatek,mt6795-systimer",
> mtk_cpux_init);

This patch looks good to me. Thanks for assisting us in spliting out
the CPUX driver.

Best regards,
Walter Chang

2023-03-29 13:11:27

by AngeloGioacchino Del Regno

[permalink] [raw]

Subject: Re: [PATCH] clocksource/drivers/timer-mediatek: Split out CPUXGPT timers

Il 29/03/23 09:51, Walter Chang (張維哲) ha scritto:
> On Thu, 2023-03-09 at 11:39 +0100, AngeloGioacchino Del Regno wrote:
>> On MediaTek platforms, CPUXGPT is the source for the AArch64 System
>> Timer, read through CNTVCT_EL0.
>>
>> The handling for starting this timer ASAP was introduced in commit
>> 327e93cf9a59 ("clocksource/drivers/timer-mediatek: Implement CPUXGPT
>> timers")
>> which description also contains an important full explanation of the
>> reasons why this driver is necessary and cannot be a module.
>>
>> In preparation for an eventual conversion of timer-mediatek to a
>> platform_driver that would be possibly built as a module, split out
>> the CPUXGPT timers driver to a new timer-mediatek-cpux.c driver.
>>
>> This commit brings no functional changes.
>>
>> Signed-off-by: AngeloGioacchino Del Regno <
>> [email protected]>
>> ---
>>
>> Note: I've added a mention to the commit that is introducing CPUXGPT
>> because it contains a broad explanation about why this is needed and
>> why it is mandatory to have it as built-in and initialized as early
>> as possible. This is mostly because this question was asked multiple
>> times and I've been pointing people to that commit to explain it all.
>>
>> This commit was made because of a discussion about the impossibility
>> to convert timer-mediatek to a module: even though that's definitely
>> not easy at all, this will make sure that whatever cannot (ever) be
>> built as module goes out of that driver.
>>
>> I tried to tackle a timer-mediatek conversion to platform_driver as
>> well, but I don't currently have the required bandwidth to do so:
>> as a first step I moved that, so I'm pushing this commit as to try
>> to reduce duplicated work.
>>
>> This commit was tested on MT6795 Sony Xperia M5.

..snip..

>> @@ -452,4 +339,3 @@ static int __init mtk_gpt_init(struct device_node
>> *node)
>> }
>> TIMER_OF_DECLARE(mtk_mt6577, "mediatek,mt6577-timer", mtk_gpt_init);
>> TIMER_OF_DECLARE(mtk_mt6765, "mediatek,mt6765-timer",
>> mtk_syst_init);
>> -TIMER_OF_DECLARE(mtk_mt6795, "mediatek,mt6795-systimer",
>> mtk_cpux_init);
>
> This patch looks good to me. Thanks for assisting us in spliting out
> the CPUX driver.
>

Hello Walter,

thanks for checking this patch. If you have actually reviewed this one,
you could help the maintainers to know by releasing your Reviewed-by tag
on this patch.

Regards,
Angelo

2023-03-30 05:39:28

by Walter Chang (張維哲)

[permalink] [raw]

Subject: Re: [PATCH] clocksource/drivers/timer-mediatek: Split out CPUXGPT timers

2023-04-06 13:46:01

by Daniel Lezcano

[permalink] [raw]

Subject: Re: [PATCH] clocksource/drivers/timer-mediatek: Split out CPUXGPT timers

On 09/03/2023 11:39, AngeloGioacchino Del Regno wrote:
> On MediaTek platforms, CPUXGPT is the source for the AArch64 System
> Timer, read through CNTVCT_EL0.
>
> The handling for starting this timer ASAP was introduced in commit
> 327e93cf9a59 ("clocksource/drivers/timer-mediatek: Implement CPUXGPT timers")
> which description also contains an important full explanation of the
> reasons why this driver is necessary and cannot be a module.
>
> In preparation for an eventual conversion of timer-mediatek to a
> platform_driver that would be possibly built as a module, split out
> the CPUXGPT timers driver to a new timer-mediatek-cpux.c driver.
>
> This commit brings no functional changes.
>
> Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
> ---

Applied, thanks

--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

2023-04-26 09:14:54

by tip-bot2 for Alexey Makhalov

[permalink] [raw]

Subject: [tip: timers/core] clocksource/drivers/timer-mediatek: Split out CPUXGPT timers

The following commit has been merged into the timers/core branch of tip:

Commit-ID: 49d576ea72a4fa5be15717babfa308b70b2bc5a4
Gitweb: https://git.kernel.org/tip/49d576ea72a4fa5be15717babfa308b70b2bc5a4
Author: AngeloGioacchino Del Regno <[email protected]>
AuthorDate: Thu, 09 Mar 2023 11:39:13 +01:00
Committer: Daniel Lezcano <[email protected]>
CommitterDate: Mon, 24 Apr 2023 16:56:13 +02:00

clocksource/drivers/timer-mediatek: Split out CPUXGPT timers

On MediaTek platforms, CPUXGPT is the source for the AArch64 System
Timer, read through CNTVCT_EL0.

The handling for starting this timer ASAP was introduced in commit
327e93cf9a59 ("clocksource/drivers/timer-mediatek: Implement CPUXGPT timers")
which description also contains an important full explanation of the
reasons why this driver is necessary and cannot be a module.

In preparation for an eventual conversion of timer-mediatek to a
platform_driver that would be possibly built as a module, split out
the CPUXGPT timers driver to a new timer-mediatek-cpux.c driver.

This commit brings no functional changes.

Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Walter Chang <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
---
drivers/clocksource/Kconfig | 9 +-
drivers/clocksource/Makefile | 1 +-
drivers/clocksource/timer-mediatek-cpux.c | 140 +++++++++++++++++++++-
drivers/clocksource/timer-mediatek.c | 114 +-----------------
4 files changed, 150 insertions(+), 114 deletions(-)
create mode 100644 drivers/clocksource/timer-mediatek-cpux.c

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 5fc8f0e..526382d 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -479,6 +479,15 @@ config MTK_TIMER
help
Support for Mediatek timer driver.

+config MTK_CPUX_TIMER
+ bool "MediaTek CPUX timer driver" if COMPILE_TEST
+ depends on HAS_IOMEM
+ default ARCH_MEDIATEK
+ select TIMER_OF
+ select CLKSRC_MMIO
+ help
+ Support for MediaTek CPUXGPT timer driver.
+
config SPRD_TIMER
bool "Spreadtrum timer driver" if EXPERT
depends on HAS_IOMEM
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 64ab547..f12d398 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_FSL_FTM_TIMER) += timer-fsl-ftm.o
obj-$(CONFIG_VF_PIT_TIMER) += timer-vf-pit.o
obj-$(CONFIG_CLKSRC_QCOM) += timer-qcom.o
obj-$(CONFIG_MTK_TIMER) += timer-mediatek.o
+obj-$(CONFIG_MTK_CPUX_TIMER) += timer-mediatek-cpux.o
obj-$(CONFIG_CLKSRC_PISTACHIO) += timer-pistachio.o
obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o
obj-$(CONFIG_OXNAS_RPS_TIMER) += timer-oxnas-rps.o
diff --git a/drivers/clocksource/timer-mediatek-cpux.c b/drivers/clocksource/timer-mediatek-cpux.c
new file mode 100644
index 0000000..a8e3df4
--- /dev/null
+++ b/drivers/clocksource/timer-mediatek-cpux.c
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MediaTek SoCs CPUX General Purpose Timer handling
+ *
+ * Based on timer-mediatek.c:
+ * Copyright (C) 2014 Matthias Brugger <[email protected]>
+ *
+ * Copyright (C) 2022 Collabora Ltd.
+ * AngeloGioacchino Del Regno <[email protected]>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/irqreturn.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+#include "timer-of.h"
+
+#define TIMER_SYNC_TICKS 3
+
+/* cpux mcusys wrapper */
+#define CPUX_CON_REG 0x0
+#define CPUX_IDX_REG 0x4
+
+/* cpux */
+#define CPUX_IDX_GLOBAL_CTRL 0x0
+ #define CPUX_ENABLE BIT(0)
+ #define CPUX_CLK_DIV_MASK GENMASK(10, 8)
+ #define CPUX_CLK_DIV1 BIT(8)
+ #define CPUX_CLK_DIV2 BIT(9)
+ #define CPUX_CLK_DIV4 BIT(10)
+#define CPUX_IDX_GLOBAL_IRQ 0x30
+
+static u32 mtk_cpux_readl(u32 reg_idx, struct timer_of *to)
+{
+ writel(reg_idx, timer_of_base(to) + CPUX_IDX_REG);
+ return readl(timer_of_base(to) + CPUX_CON_REG);
+}
+
+static void mtk_cpux_writel(u32 val, u32 reg_idx, struct timer_of *to)
+{
+ writel(reg_idx, timer_of_base(to) + CPUX_IDX_REG);
+ writel(val, timer_of_base(to) + CPUX_CON_REG);
+}
+
+static void mtk_cpux_set_irq(struct timer_of *to, bool enable)
+{
+ const unsigned long *irq_mask = cpumask_bits(cpu_possible_mask);
+ u32 val;
+
+ val = mtk_cpux_readl(CPUX_IDX_GLOBAL_IRQ, to);
+
+ if (enable)
+ val |= *irq_mask;
+ else
+ val &= ~(*irq_mask);
+
+ mtk_cpux_writel(val, CPUX_IDX_GLOBAL_IRQ, to);
+}
+
+static int mtk_cpux_clkevt_shutdown(struct clock_event_device *clkevt)
+{
+ /* Clear any irq */
+ mtk_cpux_set_irq(to_timer_of(clkevt), false);
+
+ /*
+ * Disabling CPUXGPT timer will crash the platform, especially
+ * if Trusted Firmware is using it (usually, for sleep states),
+ * so we only mask the IRQ and call it a day.
+ */
+ return 0;
+}
+
+static int mtk_cpux_clkevt_resume(struct clock_event_device *clkevt)
+{
+ mtk_cpux_set_irq(to_timer_of(clkevt), true);
+ return 0;
+}
+
+static struct timer_of to = {
+ /*
+ * There are per-cpu interrupts for the CPUX General Purpose Timer
+ * but since this timer feeds the AArch64 System Timer we can rely
+ * on the CPU timer PPIs as well, so we don't declare TIMER_OF_IRQ.
+ */
+ .flags = TIMER_OF_BASE | TIMER_OF_CLOCK,
+
+ .clkevt = {
+ .name = "mtk-cpuxgpt",
+ .cpumask = cpu_possible_mask,
+ .rating = 10,
+ .set_state_shutdown = mtk_cpux_clkevt_shutdown,
+ .tick_resume = mtk_cpux_clkevt_resume,
+ },
+};
+
+static int __init mtk_cpux_init(struct device_node *node)
+{
+ u32 freq, val;
+ int ret;
+
+ /* If this fails, bad things are about to happen... */
+ ret = timer_of_init(node, &to);
+ if (ret) {
+ WARN(1, "Cannot start CPUX timers.\n");
+ return ret;
+ }
+
+ /*
+ * Check if we're given a clock with the right frequency for this
+ * timer, otherwise warn but keep going with the setup anyway, as
+ * that makes it possible to still boot the kernel, even though
+ * it may not work correctly (random lockups, etc).
+ * The reason behind this is that having an early UART may not be
+ * possible for everyone and this gives a chance to retrieve kmsg
+ * for eventual debugging even on consumer devices.
+ */
+ freq = timer_of_rate(&to);
+ if (freq > 13000000)
+ WARN(1, "Requested unsupported timer frequency %u\n", freq);
+
+ /* Clock input is 26MHz, set DIV2 to achieve 13MHz clock */
+ val = mtk_cpux_readl(CPUX_IDX_GLOBAL_CTRL, &to);
+ val &= ~CPUX_CLK_DIV_MASK;
+ val |= CPUX_CLK_DIV2;
+ mtk_cpux_writel(val, CPUX_IDX_GLOBAL_CTRL, &to);
+
+ /* Enable all CPUXGPT timers */
+ val = mtk_cpux_readl(CPUX_IDX_GLOBAL_CTRL, &to);
+ mtk_cpux_writel(val | CPUX_ENABLE, CPUX_IDX_GLOBAL_CTRL, &to);
+
+ clockevents_config_and_register(&to.clkevt, timer_of_rate(&to),
+ TIMER_SYNC_TICKS, 0xffffffff);
+
+ return 0;
+}
+TIMER_OF_DECLARE(mtk_mt6795, "mediatek,mt6795-systimer", mtk_cpux_init);
diff --git a/drivers/clocksource/timer-mediatek.c b/drivers/clocksource/timer-mediatek.c
index d5b29fd..7bcb4a3 100644
--- a/drivers/clocksource/timer-mediatek.c
+++ b/drivers/clocksource/timer-mediatek.c
@@ -22,19 +22,6 @@

#define TIMER_SYNC_TICKS (3)

-/* cpux mcusys wrapper */
-#define CPUX_CON_REG 0x0
-#define CPUX_IDX_REG 0x4
-
-/* cpux */
-#define CPUX_IDX_GLOBAL_CTRL 0x0
- #define CPUX_ENABLE BIT(0)
- #define CPUX_CLK_DIV_MASK GENMASK(10, 8)
- #define CPUX_CLK_DIV1 BIT(8)
- #define CPUX_CLK_DIV2 BIT(9)
- #define CPUX_CLK_DIV4 BIT(10)
-#define CPUX_IDX_GLOBAL_IRQ 0x30
-
/* gpt */
#define GPT_IRQ_EN_REG 0x00
#define GPT_IRQ_ENABLE(val) BIT((val) - 1)
@@ -85,52 +72,6 @@

static void __iomem *gpt_sched_reg __read_mostly;

-static u32 mtk_cpux_readl(u32 reg_idx, struct timer_of *to)
-{
- writel(reg_idx, timer_of_base(to) + CPUX_IDX_REG);
- return readl(timer_of_base(to) + CPUX_CON_REG);
-}
-
-static void mtk_cpux_writel(u32 val, u32 reg_idx, struct timer_of *to)
-{
- writel(reg_idx, timer_of_base(to) + CPUX_IDX_REG);
- writel(val, timer_of_base(to) + CPUX_CON_REG);
-}
-
-static void mtk_cpux_set_irq(struct timer_of *to, bool enable)
-{
- const unsigned long *irq_mask = cpumask_bits(cpu_possible_mask);
- u32 val;
-
- val = mtk_cpux_readl(CPUX_IDX_GLOBAL_IRQ, to);
-
- if (enable)
- val |= *irq_mask;
- else
- val &= ~(*irq_mask);
-
- mtk_cpux_writel(val, CPUX_IDX_GLOBAL_IRQ, to);
-}
-
-static int mtk_cpux_clkevt_shutdown(struct clock_event_device *clkevt)
-{
- /* Clear any irq */
- mtk_cpux_set_irq(to_timer_of(clkevt), false);
-
- /*
- * Disabling CPUXGPT timer will crash the platform, especially
- * if Trusted Firmware is using it (usually, for sleep states),
- * so we only mask the IRQ and call it a day.
- */
- return 0;
-}
-
-static int mtk_cpux_clkevt_resume(struct clock_event_device *clkevt)
-{
- mtk_cpux_set_irq(to_timer_of(clkevt), true);
- return 0;
-}
-
static void mtk_syst_ack_irq(struct timer_of *to)
{
/* Clear and disable interrupt */
@@ -340,60 +281,6 @@ static struct timer_of to = {
},
};

-static int __init mtk_cpux_init(struct device_node *node)
-{
- static struct timer_of to_cpux;
- u32 freq, val;
- int ret;
-
- /*
- * There are per-cpu interrupts for the CPUX General Purpose Timer
- * but since this timer feeds the AArch64 System Timer we can rely
- * on the CPU timer PPIs as well, so we don't declare TIMER_OF_IRQ.
- */
- to_cpux.flags = TIMER_OF_BASE | TIMER_OF_CLOCK;
- to_cpux.clkevt.name = "mtk-cpuxgpt";
- to_cpux.clkevt.rating = 10;
- to_cpux.clkevt.cpumask = cpu_possible_mask;
- to_cpux.clkevt.set_state_shutdown = mtk_cpux_clkevt_shutdown;
- to_cpux.clkevt.tick_resume = mtk_cpux_clkevt_resume;
-
- /* If this fails, bad things are about to happen... */
- ret = timer_of_init(node, &to_cpux);
- if (ret) {
- WARN(1, "Cannot start CPUX timers.\n");
- return ret;
- }
-
- /*
- * Check if we're given a clock with the right frequency for this
- * timer, otherwise warn but keep going with the setup anyway, as
- * that makes it possible to still boot the kernel, even though
- * it may not work correctly (random lockups, etc).
- * The reason behind this is that having an early UART may not be
- * possible for everyone and this gives a chance to retrieve kmsg
- * for eventual debugging even on consumer devices.
- */
- freq = timer_of_rate(&to_cpux);
- if (freq > 13000000)
- WARN(1, "Requested unsupported timer frequency %u\n", freq);
-
- /* Clock input is 26MHz, set DIV2 to achieve 13MHz clock */
- val = mtk_cpux_readl(CPUX_IDX_GLOBAL_CTRL, &to_cpux);
- val &= ~CPUX_CLK_DIV_MASK;
- val |= CPUX_CLK_DIV2;
- mtk_cpux_writel(val, CPUX_IDX_GLOBAL_CTRL, &to_cpux);
-
- /* Enable all CPUXGPT timers */
- val = mtk_cpux_readl(CPUX_IDX_GLOBAL_CTRL, &to_cpux);
- mtk_cpux_writel(val | CPUX_ENABLE, CPUX_IDX_GLOBAL_CTRL, &to_cpux);
-
- clockevents_config_and_register(&to_cpux.clkevt, timer_of_rate(&to_cpux),
- TIMER_SYNC_TICKS, 0xffffffff);
-
- return 0;
-}
-
static int __init mtk_syst_init(struct device_node *node)
{
int ret;
@@ -452,4 +339,3 @@ static int __init mtk_gpt_init(struct device_node *node)
}
TIMER_OF_DECLARE(mtk_mt6577, "mediatek,mt6577-timer", mtk_gpt_init);
TIMER_OF_DECLARE(mtk_mt6765, "mediatek,mt6765-timer", mtk_syst_init);
-TIMER_OF_DECLARE(mtk_mt6795, "mediatek,mt6795-systimer", mtk_cpux_init);