Enable PCIe Endpoint controller on the SDX65 MTP board based
on Qualcomm SDX65 platform.
Signed-off-by: Rohit Agarwal <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
---
arch/arm/boot/dts/qcom-sdx65-mtp.dts | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
index 29ccb158..02d8d6e 100644
--- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
@@ -250,6 +250,18 @@
status = "okay";
};
+&pcie_ep {
+ pinctrl-0 = <&pcie_ep_clkreq_default
+ &pcie_ep_perst_default
+ &pcie_ep_wake_default>;
+ pinctrl-names = "default";
+
+ reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+};
+
&pcie_phy {
vdda-phy-supply = <&vreg_l1b_1p2>;
vdda-pll-supply = <&vreg_l4b_0p88>;
@@ -281,6 +293,29 @@
status = "okay";
};
+&tlmm {
+ pcie_ep_clkreq_default: pcie-ep-clkreq-default-state {
+ pins = "gpio56";
+ function = "pcie_clkreq";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pcie_ep_perst_default: pcie-ep-perst-default-state {
+ pins = "gpio57";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ pcie_ep_wake_default: pcie-ep-wake-default-state {
+ pins = "gpio53";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
&usb {
status = "okay";
};
--
2.7.4