2023-05-19 09:17:31

by Rohit Agarwal

[permalink] [raw]
Subject: [PATCH 0/8] Add devicetree support for SDX75 Modem and IDP

Hi,

This series adds devicetree support for Qualcomm SDX75 platform and IDP
board. This series functionally depends on GCC and RPMh Clock support
series [1], and pinctrl support for SDX75 [2] which are under review.

With this current devicetree support, the IDP can boot into initramfsshell.

[1] https://lore.kernel.org/lkml/[email protected]/
[2] https://lore.kernel.org/all/[email protected]/

Thanks,
Rohit.


Imran Shaik (1):
arm64: dts: qcom: Add support for GCC and RPMHCC for SDX75

Rohit Agarwal (7):
dt-bindings: arm: qcom: Document SDX75 platform and boards
dt-bindings: firmware: scm: Add compatible for SDX75
dt-bindings: interrupt-controller: Add SDX75 PDC compatible
dt-bindings: arm-smmu: Add SDX75 SMMU compatible
arm64: dts: qcom: Add SDX75 platform and IDP board support
arm64: dts: qcom: Add QUPv3 UART console node for SDX75
arm64: dts: qcom: Enable the QUPv3 UART console for SDX75

Documentation/devicetree/bindings/arm/qcom.yaml | 7 +
.../devicetree/bindings/firmware/qcom,scm.yaml | 1 +
.../bindings/interrupt-controller/qcom,pdc.yaml | 1 +
.../devicetree/bindings/iommu/arm,smmu.yaml | 1 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/sdx75-idp.dts | 34 ++
arch/arm64/boot/dts/qcom/sdx75.dtsi | 618 +++++++++++++++++++++
7 files changed, 663 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sdx75-idp.dts
create mode 100644 arch/arm64/boot/dts/qcom/sdx75.dtsi

--
2.7.4



2023-05-19 09:25:11

by Rohit Agarwal

[permalink] [raw]
Subject: [PATCH 4/8] dt-bindings: arm-smmu: Add SDX75 SMMU compatible

Add devicetree binding for Qualcomm SDX75 SMMU.

Signed-off-by: Rohit Agarwal <[email protected]>
---
Documentation/devicetree/bindings/iommu/arm,smmu.yaml | 1 +
1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
index ba677d4..631be10 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
@@ -45,6 +45,7 @@ properties:
- qcom,sdm845-smmu-500
- qcom,sdx55-smmu-500
- qcom,sdx65-smmu-500
+ - qcom,sdx75-smmu-500
- qcom,sm6115-smmu-500
- qcom,sm6125-smmu-500
- qcom,sm6350-smmu-500
--
2.7.4


2023-05-19 09:25:44

by Rohit Agarwal

[permalink] [raw]
Subject: [PATCH 7/8] arm64: dts: qcom: Add QUPv3 UART console node for SDX75

Add the debug uart console node in devicetree.

Signed-off-by: Rohit Agarwal <[email protected]>
---
arch/arm64/boot/dts/qcom/sdx75.dtsi | 49 +++++++++++++++++++++++++++++++++++++
1 file changed, 49 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi
index dbbd2f4..ca467f9 100644
--- a/arch/arm64/boot/dts/qcom/sdx75.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi
@@ -385,6 +385,34 @@
#power-domain-cells = <1>;
};

+ qupv3_id_0: geniqup@9c0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0x0 0x009c0000 0x0 0x2000>;
+ clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+ clock-names = "m-ahb",
+ "s-ahb";
+ iommus = <&apps_smmu 0xe3 0x0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ uart1: serial@984000 {
+ compatible = "qcom,geni-debug-uart";
+ reg = <0x0 0x00984000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qupv3_se1_2uart_tx_active>,
+ <&qupv3_se1_2uart_rx_active>;
+ pinctrl-1 = <&qupv3_se1_2uart_sleep>;
+ pinctrl-names = "default",
+ "sleep";
+ status = "disabled";
+ };
+ };
+
tcsr_mutex: hwlock@1f40000 {
compatible = "qcom,tcsr-mutex";
reg = <0x0 0x01f40000 0x0 0x40000>;
@@ -413,6 +441,27 @@
interrupt-controller;
#interrupt-cells = <2>;
wakeup-parent = <&pdc>;
+
+ qupv3_se1_2uart_tx_active: qupv3-se1-2uart-tx-active-state {
+ pins = "gpio12";
+ function = "qup_se1_l2_mira";
+ drive-strength= <2>;
+ bias-disable;
+ };
+
+ qupv3_se1_2uart_rx_active: qupv3-se1-2uart-rx-active-state {
+ pins = "gpio13";
+ function = "qup_se1_l3_mira";
+ drive-strength= <2>;
+ bias-disable;
+ };
+
+ qupv3_se1_2uart_sleep: qupv3-se1-2uart-sleep-state {
+ pins = "gpio12", "gpio13";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
};

apps_smmu: iommu@15000000 {
--
2.7.4


2023-05-19 09:25:51

by Rohit Agarwal

[permalink] [raw]
Subject: [PATCH 3/8] dt-bindings: interrupt-controller: Add SDX75 PDC compatible

Add device tree bindings for PDC on SDX75 SOC.

Signed-off-by: Rohit Agarwal <[email protected]>
---
Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml | 1 +
1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
index a106ba6..24ec69a 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
@@ -34,6 +34,7 @@ properties:
- qcom,sdm845-pdc
- qcom,sdx55-pdc
- qcom,sdx65-pdc
+ - qcom,sdx75-pdc
- qcom,sm6350-pdc
- qcom,sm8150-pdc
- qcom,sm8250-pdc
--
2.7.4


2023-05-19 09:27:24

by Rohit Agarwal

[permalink] [raw]
Subject: [PATCH 1/8] dt-bindings: arm: qcom: Document SDX75 platform and boards

Document the SDX75 platform binding and also the boards using it.

Signed-off-by: Rohit Agarwal <[email protected]>
---
Documentation/devicetree/bindings/arm/qcom.yaml | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index d9dd256..772f145 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -69,6 +69,7 @@ description: |
sdm845
sdx55
sdx65
+ sdx75
sm4250
sm6115
sm6115p
@@ -821,6 +822,11 @@ properties:

- items:
- enum:
+ - qcom,sdx75-idp
+ - const: qcom,sdx75
+
+ - items:
+ - enum:
- qcom,ipq6018-cp01
- qcom,ipq6018-cp01-c1
- const: qcom,ipq6018
@@ -1042,6 +1048,7 @@ allOf:
- qcom,sdm845
- qcom,sdx55
- qcom,sdx65
+ - qcom,sdx75
- qcom,sm4250
- qcom,sm6115
- qcom,sm6125
--
2.7.4


2023-05-19 09:30:31

by Rohit Agarwal

[permalink] [raw]
Subject: [PATCH 5/8] arm64: dts: qcom: Add SDX75 platform and IDP board support

Add basic devicetree support for SDX75 platform and IDP board from
Qualcomm. The SDX75 platform features an ARM Cortex A55 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, UART, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..

This commit adds basic devicetree support.

Signed-off-by: Rohit Agarwal <[email protected]>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/sdx75-idp.dts | 19 ++
arch/arm64/boot/dts/qcom/sdx75.dtsi | 534 +++++++++++++++++++++++++++++++++
3 files changed, 554 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sdx75-idp.dts
create mode 100644 arch/arm64/boot/dts/qcom/sdx75.dtsi

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index d42c595..4fd5a18 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -173,6 +173,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-polaris.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sdx75-idp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm6115p-lenovo-j606f.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb
diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
new file mode 100644
index 0000000..e2e803b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sdx75.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. SDX75 IDP";
+ compatible = "qcom,sdx75-idp", "qcom,sdx75";
+ qcom,board-id = <0x2010022 0x302>;
+
+};
+
+&tlmm {
+ gpio-reserved-ranges = <110 6>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi
new file mode 100644
index 0000000..c2b8810
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi
@@ -0,0 +1,534 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * SDX75 SoC device tree source
+ *
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ *
+ */
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ qcom,msm-id = <556 0x10000>;
+ interrupt-parent = <&intc>;
+
+ chosen: chosen { };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0 0 0>;
+ };
+
+ clocks { };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ power-domains = <&CPU_PD0>;
+ power-domain-names = "psci";
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ L3_0: l3-cache {
+ compatible = "cache";
+ };
+ };
+ };
+
+ CPU1: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ power-domains = <&CPU_PD1>;
+ power-domain-names = "psci";
+ next-level-cache = <&L2_100>;
+ L2_100: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU2: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x200>;
+ enable-method = "psci";
+ power-domains = <&CPU_PD2>;
+ power-domain-names = "psci";
+ next-level-cache = <&L2_200>;
+ L2_200: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU3: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x300>;
+ enable-method = "psci";
+ power-domains = <&CPU_PD3>;
+ power-domain-names = "psci";
+ next-level-cache = <&L2_300>;
+ L2_300: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+
+ core1 {
+ cpu = <&CPU1>;
+ };
+
+ core2 {
+ cpu = <&CPU2>;
+ };
+
+ core3 {
+ cpu = <&CPU3>;
+ };
+ };
+ };
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ CPU_OFF: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ entry-latency-us = <235>;
+ exit-latency-us = <428>;
+ min-residency-us = <1774>;
+ arm,psci-suspend-param = <0x40000003>;
+ local-timer-stop;
+ };
+
+ CPU_RAIL_OFF: cpu-rail-sleep-1 {
+ compatible = "arm,idle-state";
+ entry-latency-us = <800>;
+ exit-latency-us = <750>;
+ min-residency-us = <4090>;
+ arm,psci-suspend-param = <0x40000004>;
+ local-timer-stop;
+ };
+
+ };
+
+ domain-idle-states {
+ CLUSTER_SLEEP_0: cluster-sleep-0 {
+ compatible = "domain-idle-state";
+ arm,psci-suspend-param = <0x41000044>;
+ entry-latency-us = <1050>;
+ exit-latency-us = <2500>;
+ min-residency-us = <5309>;
+ };
+
+ CLUSTER_SLEEP_1: cluster-sleep-1 {
+ compatible = "domain-idle-state";
+ arm,psci-suspend-param = <0x4100b344>;
+ entry-latency-us = <2793>;
+ exit-latency-us = <4023>;
+ min-residency-us = <9826>;
+ };
+
+ CX_RET: cx-ret {
+ compatible = "domain-idle-state";
+ arm,psci-suspend-param = <0x41001344>;
+ entry-latency-us = <2761>;
+ exit-latency-us = <3964>;
+ min-residency-us = <8467>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+
+ CPU_PD0: power-domain-cpu0 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>;
+ };
+
+ CPU_PD1: power-domain-cpu1 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>;
+ };
+
+ CPU_PD2: power-domain-cpu2 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>;
+ };
+
+ CPU_PD3: power-domain-cpu3 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>;
+ };
+
+ CLUSTER_PD: power-domain-cpu-cluster0 {
+ #power-domain-cells = <0>;
+ domain-idle-states = <&CLUSTER_SLEEP_0 &CX_RET &CLUSTER_SLEEP_1>;
+ };
+ };
+
+ firmware {
+ scm: scm {
+ compatible = "qcom,scm-sdx75", "qcom,scm";
+ };
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gunyah_hyp_mem: memory@80000000 {
+ reg = <0x0 0x80000000 0x0 0x800000>;
+ no-map;
+ };
+
+ hyp_elf_package_mem: memory@80800000 {
+ reg = <0x0 0x80800000 0x0 0x200000>;
+ no-map;
+ };
+
+ access_control_db_mem: memory@81380000 {
+ reg = <0x0 0x81380000 0x0 0x80000>;
+ no-map;
+ };
+
+ qteetz_mem: memory@814e0000 {
+ reg = <0x0 0x814e0000 0x0 0x2a0000>;
+ no-map;
+ };
+
+ trusted_apps_mem: memory@81780000 {
+ reg = <0x0 0x81780000 0x0 0xa00000>;
+ no-map;
+ };
+
+ xbl_ramdump_mem: memory@87a00000 {
+ reg = <0x0 0x87a00000 0x0 0x1c0000>;
+ no-map;
+ };
+
+ cpucp_fw_mem: memory@87c00000 {
+ reg = <0x0 0x87c00000 0x0 0x100000>;
+ no-map;
+ };
+
+ xbl_dtlog_mem: memory@87d00000 {
+ reg = <0x0 0x87d00000 0x0 0x40000>;
+ no-map;
+ };
+
+ xbl_sc_mem: memory@87d40000 {
+ reg = <0x0 0x87d40000 0x0 0x40000>;
+ no-map;
+ };
+
+ modem_efs_shared_mem: memory@87d80000 {
+ reg = <0x0 0x87d80000 0x0 0x10000>;
+ no-map;
+ };
+
+ aop_image_mem: memory@87e00000 {
+ reg = <0x0 0x87e00000 0x0 0x20000>;
+ no-map;
+ };
+
+ smem_mem: memory@87e20000 {
+ reg = <0x0 0x87e20000 0x0 0xc0000>;
+ no-map;
+ };
+
+ aop_cmd_db_mem: memory@87ee0000 {
+ compatible = "qcom,cmd-db";
+ reg = <0x0 0x87ee0000 0x0 0x20000>;
+ no-map;
+ };
+
+ aop_config_mem: memory@87f00000 {
+ reg = <0x0 0x87f00000 0x0 0x20000>;
+ no-map;
+ };
+
+ ipa_fw_mem: memory@87f20000 {
+ reg = <0x0 0x87f20000 0x0 0x10000>;
+ no-map;
+ };
+
+ secdata_mem: memory@87f30000 {
+ reg = <0x0 0x87f30000 0x0 0x1000>;
+ no-map;
+ };
+
+ tme_crashdump_mem: memory@87f31000 {
+ reg = <0x0 0x87f31000 0x0 0x40000>;
+ no-map;
+ };
+
+ tme_log_mem: memory@87f71000 {
+ reg = <0x0 0x87f71000 0x0 0x4000>;
+ no-map;
+ };
+
+ uefi_log_mem: memory@87f75000 {
+ reg = <0x0 0x87f75000 0x0 0x10000>;
+ no-map;
+ };
+
+ qdss_mem: memory@88800000 {
+ reg = <0x0 0x88800000 0x0 0x300000>;
+ no-map;
+ };
+
+ audio_heap_mem: memory@88b00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x88b00000 0x0 0x400000>;
+ no-map;
+ };
+
+ mpss_dsmharq_mem: memory@88f00000 {
+ reg = <0x0 0x88f00000 0x0 0x5080000>;
+ no-map;
+ };
+
+ q6_mpss_dtb_mem: memory@8df80000 {
+ reg = <0x0 0x8df80000 0x0 0x80000>;
+ no-map;
+ };
+
+ mpssadsp_mem: memory@8e000000 {
+ reg = <0x0 0x8e000000 0x0 0xf400000>;
+ no-map;
+ };
+
+ gunyah_trace_buffer_mem: memory@bdb00000 {
+ reg = <0x0 0xbdb00000 0x0 0x2000000>;
+ no-map;
+ };
+
+ smmu_debug_buf_mem: memory@bfb00000 {
+ reg = <0x0 0xbfb00000 0x0 0x100000>;
+ no-map;
+ };
+
+ hyp_smmu_s2_pt_mem: memory@bfc00000 {
+ reg = <0x0 0xbfc00000 0x0 0x400000>;
+ no-map;
+ };
+ };
+
+ smem: qcom,smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_mem>;
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ soc: soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ compatible = "simple-bus";
+
+ tcsr_mutex: hwlock@1f40000 {
+ compatible = "qcom,tcsr-mutex";
+ reg = <0x0 0x01f40000 0x0 0x40000>;
+ #hwlock-cells = <1>;
+ };
+
+ pdc: interrupt-controller@b220000 {
+ compatible = "qcom,sdx75-pdc", "qcom,pdc";
+ reg = <0x0 0xb220000 0x0 0x30000>,
+ <0x0 0x174000f0 0x0 0x64>;
+ qcom,pdc-ranges = <0 147 52>,
+ <52 266 32>,
+ <84 500 59>;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ };
+
+ tlmm: pinctrl@f000000 {
+ compatible = "qcom,sdx75-tlmm";
+ reg = <0x0 0x0f000000 0x0 0x400000>;
+ interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 133>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ wakeup-parent = <&pdc>;
+ };
+
+ apps_smmu: iommu@15000000 {
+ compatible = "qcom,sdx75-smmu-500", "arm,mmu-500";
+ reg = <0x0 0x15000000 0x0 0x40000>;
+ #iommu-cells = <2>;
+ #global-interrupts = <2>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ intc: interrupt-controller@17200000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ #redistributor-regions = <1>;
+ redistributor-stride = <0x0 0x20000>;
+ reg = <0x0 0x17200000 0x0 0x10000>,
+ <0x0 0x17260000 0x0 0x80000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ timer@17420000 {
+ compatible = "arm,armv7-timer-mem";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ reg = <0x0 0x17420000 0x0 0x1000>;
+ clock-frequency = <19200000>;
+
+ frame@17421000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17421000 0x0 0x1000>,
+ <0x0 0x17422000 0x0 0x1000>;
+ };
+
+ frame@17423000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17425000 0x0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17425000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17425000 0x0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17427000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17427000 0x0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17429000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17429000 0x0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@1742b000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x1742b000 0x0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@1742d000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x1742d000 0x0 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ apps_rsc: rsc@17a00000 {
+ label = "apps_rsc";
+ compatible = "qcom,rpmh-rsc";
+ reg = <0x0 0x17a00000 0x0 0x10000>,
+ <0x0 0x17a10000 0x0 0x10000>,
+ <0x0 0x17a20000 0x0 0x10000>;
+ reg-names = "drv-0", "drv-1", "drv-2";
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+
+ power-domains = <&CLUSTER_PD>;
+ qcom,tcs-offset = <0xd00>;
+ qcom,drv-id = <2>;
+ qcom,tcs-config = <ACTIVE_TCS 3>,
+ <SLEEP_TCS 2>,
+ <WAKE_TCS 2>,
+ <CONTROL_TCS 0>;
+
+ apps_bcm_voter: bcm_voter {
+ compatible = "qcom,bcm-voter";
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <19200000>;
+ };
+};
--
2.7.4


2023-05-19 09:30:36

by Rohit Agarwal

[permalink] [raw]
Subject: [PATCH 6/8] arm64: dts: qcom: Add support for GCC and RPMHCC for SDX75

From: Imran Shaik <[email protected]>

Add support for GCC and RPMHCC clock nodes for SDX75 platform.

Signed-off-by: Imran Shaik <[email protected]>
Signed-off-by: Rohit Agarwal <[email protected]>
---
arch/arm64/boot/dts/qcom/sdx75.dtsi | 37 ++++++++++++++++++++++++++++++++++++-
1 file changed, 36 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi
index c2b8810..dbbd2f4 100644
--- a/arch/arm64/boot/dts/qcom/sdx75.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi
@@ -7,6 +7,7 @@
*/

#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sdx75-gcc.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>

@@ -23,7 +24,21 @@
reg = <0 0 0 0>;
};

- clocks { };
+ clocks {
+ xo_board: xo_board {
+ compatible = "fixed-clock";
+ clock-frequency = <76800000>;
+ clock-output-names = "xo_board";
+ #clock-cells = <0>;
+ };
+
+ sleep_clk: sleep_clk {
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ clock-output-names = "sleep_clk";
+ #clock-cells = <0>;
+ };
+ };

cpus {
#address-cells = <2>;
@@ -358,6 +373,18 @@
ranges;
compatible = "simple-bus";

+ gcc: clock-controller@80000 {
+ compatible = "qcom,sdx75-gcc";
+ reg = <0x0 0x0080000 0x0 0x1f7400>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&sleep_clk>;
+ clock-names = "bi_tcxo",
+ "sleep_clk";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
tcsr_mutex: hwlock@1f40000 {
compatible = "qcom,tcsr-mutex";
reg = <0x0 0x01f40000 0x0 0x40000>;
@@ -520,6 +547,14 @@
apps_bcm_voter: bcm_voter {
compatible = "qcom,bcm-voter";
};
+
+ rpmhcc: clock-controller {
+ compatible = "qcom,sdx75-rpmh-clk";
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ #clock-cells = <1>;
+ };
+
};
};

--
2.7.4


2023-05-19 16:00:48

by Conor Dooley

[permalink] [raw]
Subject: Re: [PATCH 1/8] dt-bindings: arm: qcom: Document SDX75 platform and boards

On Fri, May 19, 2023 at 02:39:03PM +0530, Rohit Agarwal wrote:
> Document the SDX75 platform binding and also the boards using it.
>
Acked-by: Conor Dooley <[email protected]>

Thanks,
Conor.


Attachments:
(No filename) (209.00 B)
signature.asc (235.00 B)
Download all attachments

2023-05-19 16:05:53

by Conor Dooley

[permalink] [raw]
Subject: Re: [PATCH 3/8] dt-bindings: interrupt-controller: Add SDX75 PDC compatible

On Fri, May 19, 2023 at 02:39:05PM +0530, Rohit Agarwal wrote:
> Add device tree bindings for PDC on SDX75 SOC.
>
Acked-by: Conor Dooley <[email protected]>

Thanks,
Conor.


Attachments:
(No filename) (190.00 B)
signature.asc (235.00 B)
Download all attachments

2023-05-19 16:05:59

by Conor Dooley

[permalink] [raw]
Subject: Re: [PATCH 4/8] dt-bindings: arm-smmu: Add SDX75 SMMU compatible

On Fri, May 19, 2023 at 02:39:06PM +0530, Rohit Agarwal wrote:
> Add devicetree binding for Qualcomm SDX75 SMMU.
>
> Signed-off-by: Rohit Agarwal <[email protected]>

Acked-by: Conor Dooley <[email protected]>

Thanks,
Conor.


Attachments:
(No filename) (253.00 B)
signature.asc (235.00 B)
Download all attachments

2023-05-19 17:47:28

by Konrad Dybcio

[permalink] [raw]
Subject: Re: [PATCH 5/8] arm64: dts: qcom: Add SDX75 platform and IDP board support



On 19.05.2023 11:09, Rohit Agarwal wrote:
> Add basic devicetree support for SDX75 platform and IDP board from
> Qualcomm. The SDX75 platform features an ARM Cortex A55 CPU which forms
> the Application Processor Sub System (APSS) along with standard Qualcomm
> peripherals like GCC, TLMM, UART, QPIC, and BAM etc... Also, there
> exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
> etc..
>
> This commit adds basic devicetree support.
>
> Signed-off-by: Rohit Agarwal <[email protected]>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/sdx75-idp.dts | 19 ++
> arch/arm64/boot/dts/qcom/sdx75.dtsi | 534 +++++++++++++++++++++++++++++++++
> 3 files changed, 554 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sdx75-idp.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sdx75.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index d42c595..4fd5a18 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -173,6 +173,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-polaris.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sdx75-idp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm6115p-lenovo-j606f.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
> new file mode 100644
> index 0000000..e2e803b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
> @@ -0,0 +1,19 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "sdx75.dtsi"
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. SDX75 IDP";
> + compatible = "qcom,sdx75-idp", "qcom,sdx75";
> + qcom,board-id = <0x2010022 0x302>;
You should be able to get by without qcom,{msm,board}-id.

> +
> +};
> +
> +&tlmm {
> + gpio-reserved-ranges = <110 6>;
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi
> new file mode 100644
> index 0000000..c2b8810
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi
> @@ -0,0 +1,534 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * SDX75 SoC device tree source
> + *
> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + *
> + */
> +
> +#include <dt-bindings/clock/qcom,rpmh.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
> +
> +/ {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + qcom,msm-id = <556 0x10000>;
> + interrupt-parent = <&intc>;
> +
> + chosen: chosen { };
> +
> + memory {
The memory node should have a unit address.

> + device_type = "memory";
> + reg = <0 0 0 0>;
> + };
> +
> + clocks { };
> +
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
[...]

> +
> + CLUSTER_PD: power-domain-cpu-cluster0 {
> + #power-domain-cells = <0>;
> + domain-idle-states = <&CLUSTER_SLEEP_0 &CX_RET &CLUSTER_SLEEP_1>;
Is CLUSTER_SLEEP_1 deeper than CX retention?

> + };
> + };
> +
> + firmware {
> + scm: scm {
> + compatible = "qcom,scm-sdx75", "qcom,scm";
> + };
> + };
> +
> + pmu {
> + compatible = "arm,armv8-pmuv3";
> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + gunyah_hyp_mem: memory@80000000 {
reserved memory subnodes should have meaningful node names, e.g.

hypervisor@800...

> + reg = <0x0 0x80000000 0x0 0x800000>;
> + no-map;
> + };
> +
[...]

> +
> + smem: qcom,smem {
> + compatible = "qcom,smem";
> + memory-region = <&smem_mem>;
> + hwlocks = <&tcsr_mutex 3>;
> + };
> +
> + soc: soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
Are the SoC buses limited to 32b addresses?

> + compatible = "simple-bus";
Compatible should go first.

> +
> + tcsr_mutex: hwlock@1f40000 {
> + compatible = "qcom,tcsr-mutex";
> + reg = <0x0 0x01f40000 0x0 0x40000>;
> + #hwlock-cells = <1>;
> + };
> +
> + pdc: interrupt-controller@b220000 {
> + compatible = "qcom,sdx75-pdc", "qcom,pdc";
> + reg = <0x0 0xb220000 0x0 0x30000>,
> + <0x0 0x174000f0 0x0 0x64>;
> + qcom,pdc-ranges = <0 147 52>,
> + <52 266 32>,
> + <84 500 59>;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&intc>;
> + interrupt-controller;
> + };
> +
> + tlmm: pinctrl@f000000 {
> + compatible = "qcom,sdx75-tlmm";
> + reg = <0x0 0x0f000000 0x0 0x400000>;
> + interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-ranges = <&tlmm 0 0 133>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + wakeup-parent = <&pdc>;
> + };
> +
> + apps_smmu: iommu@15000000 {
> + compatible = "qcom,sdx75-smmu-500", "arm,mmu-500";
> + reg = <0x0 0x15000000 0x0 0x40000>;
> + #iommu-cells = <2>;
> + #global-interrupts = <2>;
> + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
Many newer SoCs have dma-coherent SMMUs. Is this the case here?

> + };
> +
> + intc: interrupt-controller@17200000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + #redistributor-regions = <1>;
> + redistributor-stride = <0x0 0x20000>;
> + reg = <0x0 0x17200000 0x0 0x10000>,
> + <0x0 0x17260000 0x0 0x80000>;
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + timer@17420000 {
> + compatible = "arm,armv7-timer-mem";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + reg = <0x0 0x17420000 0x0 0x1000>;
> + clock-frequency = <19200000>;
clock-frequency is discouraged, unless strictly necessary.

Since gh is running, the timer is already programmed so it should be
fine to drop this.

[...]

> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
> + clock-frequency = <19200000>;
Ditto

Konrad
> + };
> +};

2023-05-20 10:27:06

by kernel test robot

[permalink] [raw]
Subject: Re: [PATCH 6/8] arm64: dts: qcom: Add support for GCC and RPMHCC for SDX75

Hi Rohit,

kernel test robot noticed the following build errors:

[auto build test ERROR on robh/for-next]
[also build test ERROR on tip/irq/core joro-iommu/next linus/master v6.4-rc2 next-20230519]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url: https://github.com/intel-lab-lkp/linux/commits/Rohit-Agarwal/dt-bindings-arm-qcom-Document-SDX75-platform-and-boards/20230519-171116
base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
patch link: https://lore.kernel.org/r/1684487350-30476-7-git-send-email-quic_rohiagar%40quicinc.com
patch subject: [PATCH 6/8] arm64: dts: qcom: Add support for GCC and RPMHCC for SDX75
config: arm64-randconfig-r006-20230517
compiler: clang version 17.0.0 (https://github.com/llvm/llvm-project b0fb98227c90adf2536c9ad644a74d5e92961111)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# install arm64 cross compiling tool for clang build
# apt-get install binutils-aarch64-linux-gnu
# https://github.com/intel-lab-lkp/linux/commit/768f74f2345d9af657bd58a98e7ade22b7a5c3e2
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Rohit-Agarwal/dt-bindings-arm-qcom-Document-SDX75-platform-and-boards/20230519-171116
git checkout 768f74f2345d9af657bd58a98e7ade22b7a5c3e2
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=arm64 olddefconfig
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=arm64 SHELL=/bin/bash

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All errors (new ones prefixed by >>):

In file included from arch/arm64/boot/dts/qcom/sdx75-idp.dts:8:
>> arch/arm64/boot/dts/qcom/sdx75.dtsi:10:10: fatal error: 'dt-bindings/clock/qcom,sdx75-gcc.h' file not found
#include <dt-bindings/clock/qcom,sdx75-gcc.h>
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.


vim +10 arch/arm64/boot/dts/qcom/sdx75.dtsi

> 10 #include <dt-bindings/clock/qcom,sdx75-gcc.h>
11 #include <dt-bindings/interrupt-controller/arm-gic.h>
12 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
13

--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki


Attachments:
(No filename) (2.74 kB)
config (209.98 kB)
Download all attachments

2023-05-26 21:30:32

by Bjorn Andersson

[permalink] [raw]
Subject: Re: [PATCH 6/8] arm64: dts: qcom: Add support for GCC and RPMHCC for SDX75

On Sat, May 20, 2023 at 06:08:25PM +0800, kernel test robot wrote:
> Hi Rohit,
>
> kernel test robot noticed the following build errors:
>
> [auto build test ERROR on robh/for-next]
> [also build test ERROR on tip/irq/core joro-iommu/next linus/master v6.4-rc2 next-20230519]
> [If your patch is applied to the wrong git tree, kindly drop us a note.
> And when submitting patch, we suggest to use '--base' as documented in
> https://git-scm.com/docs/git-format-patch#_base_tree_information]
>
> url: https://github.com/intel-lab-lkp/linux/commits/Rohit-Agarwal/dt-bindings-arm-qcom-Document-SDX75-platform-and-boards/20230519-171116
> base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
> patch link: https://lore.kernel.org/r/1684487350-30476-7-git-send-email-quic_rohiagar%40quicinc.com
> patch subject: [PATCH 6/8] arm64: dts: qcom: Add support for GCC and RPMHCC for SDX75
> config: arm64-randconfig-r006-20230517
> compiler: clang version 17.0.0 (https://github.com/llvm/llvm-project b0fb98227c90adf2536c9ad644a74d5e92961111)
> reproduce (this is a W=1 build):
> wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> chmod +x ~/bin/make.cross
> # install arm64 cross compiling tool for clang build
> # apt-get install binutils-aarch64-linux-gnu
> # https://github.com/intel-lab-lkp/linux/commit/768f74f2345d9af657bd58a98e7ade22b7a5c3e2
> git remote add linux-review https://github.com/intel-lab-lkp/linux
> git fetch --no-tags linux-review Rohit-Agarwal/dt-bindings-arm-qcom-Document-SDX75-platform-and-boards/20230519-171116
> git checkout 768f74f2345d9af657bd58a98e7ade22b7a5c3e2
> # save the config file
> mkdir build_dir && cp config build_dir/.config
> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=arm64 olddefconfig
> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=arm64 SHELL=/bin/bash
>
> If you fix the issue, kindly add following tag where applicable
> | Reported-by: kernel test robot <[email protected]>
> | Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
>
> All errors (new ones prefixed by >>):
>
> In file included from arch/arm64/boot/dts/qcom/sdx75-idp.dts:8:
> >> arch/arm64/boot/dts/qcom/sdx75.dtsi:10:10: fatal error: 'dt-bindings/clock/qcom,sdx75-gcc.h' file not found
> #include <dt-bindings/clock/qcom,sdx75-gcc.h>
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This error can be ignored, I will fix the problem when applying the
updated patches.

Regards,
Bjorn

2023-05-30 12:01:43

by Rohit Agarwal

[permalink] [raw]
Subject: Re: [PATCH 5/8] arm64: dts: qcom: Add SDX75 platform and IDP board support

Thanks for reviewing. Sorry for the late reply was on leave.

On 5/19/2023 10:58 PM, Konrad Dybcio wrote:
>
> On 19.05.2023 11:09, Rohit Agarwal wrote:
>> Add basic devicetree support for SDX75 platform and IDP board from
>> Qualcomm. The SDX75 platform features an ARM Cortex A55 CPU which forms
>> the Application Processor Sub System (APSS) along with standard Qualcomm
>> peripherals like GCC, TLMM, UART, QPIC, and BAM etc... Also, there
>> exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
>> etc..
>>
>> This commit adds basic devicetree support.
>>
>> Signed-off-by: Rohit Agarwal <[email protected]>
>> ---
>> arch/arm64/boot/dts/qcom/Makefile | 1 +
>> arch/arm64/boot/dts/qcom/sdx75-idp.dts | 19 ++
>> arch/arm64/boot/dts/qcom/sdx75.dtsi | 534 +++++++++++++++++++++++++++++++++
>> 3 files changed, 554 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/qcom/sdx75-idp.dts
>> create mode 100644 arch/arm64/boot/dts/qcom/sdx75.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index d42c595..4fd5a18 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -173,6 +173,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-polaris.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb
>> +dtb-$(CONFIG_ARCH_QCOM) += sdx75-idp.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += sm6115p-lenovo-j606f.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb
>> diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
>> new file mode 100644
>> index 0000000..e2e803b
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
>> @@ -0,0 +1,19 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "sdx75.dtsi"
>> +
>> +/ {
>> + model = "Qualcomm Technologies, Inc. SDX75 IDP";
>> + compatible = "qcom,sdx75-idp", "qcom,sdx75";
>> + qcom,board-id = <0x2010022 0x302>;
> You should be able to get by without qcom,{msm,board}-id.
Actually the bootloader requires the msm and board id. Shouldn't this
become a necessary field then?
>
>> +
>> +};
>> +
>> +&tlmm {
>> + gpio-reserved-ranges = <110 6>;
>> +};
>> diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi
>> new file mode 100644
>> index 0000000..c2b8810
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi
>> @@ -0,0 +1,534 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * SDX75 SoC device tree source
>> + *
>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
>> + *
>> + */
>> +
>> +#include <dt-bindings/clock/qcom,rpmh.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
>> +
>> +/ {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + qcom,msm-id = <556 0x10000>;
>> + interrupt-parent = <&intc>;
>> +
>> + chosen: chosen { };
>> +
>> + memory {
> The memory node should have a unit address.
Sure will update this.
>
>> + device_type = "memory";
>> + reg = <0 0 0 0>;
>> + };
>> +
>> + clocks { };
>> +
>> + cpus {
>> + #address-cells = <2>;
>> + #size-cells = <0>;
>> +
> [...]
>
>> +
>> + CLUSTER_PD: power-domain-cpu-cluster0 {
>> + #power-domain-cells = <0>;
>> + domain-idle-states = <&CLUSTER_SLEEP_0 &CX_RET &CLUSTER_SLEEP_1>;
> Is CLUSTER_SLEEP_1 deeper than CX retention?
Yes
>
>> + };
>> + };
>> +
>> + firmware {
>> + scm: scm {
>> + compatible = "qcom,scm-sdx75", "qcom,scm";
>> + };
>> + };
>> +
>> + pmu {
>> + compatible = "arm,armv8-pmuv3";
>> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
>> + };
>> +
>> + reserved-memory {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> +
>> + gunyah_hyp_mem: memory@80000000 {
> reserved memory subnodes should have meaningful node names, e.g.
>
> hypervisor@800...
Will update this.
>
>> + reg = <0x0 0x80000000 0x0 0x800000>;
>> + no-map;
>> + };
>> +
> [...]
>
>> +
>> + smem: qcom,smem {
>> + compatible = "qcom,smem";
>> + memory-region = <&smem_mem>;
>> + hwlocks = <&tcsr_mutex 3>;
>> + };
>> +
>> + soc: soc {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
> Are the SoC buses limited to 32b addresses?
No, Will fix this in the next.
>
>> + compatible = "simple-bus";
> Compatible should go first.
Yes, Ok.
>> +
>> + tcsr_mutex: hwlock@1f40000 {
>> + compatible = "qcom,tcsr-mutex";
>> + reg = <0x0 0x01f40000 0x0 0x40000>;
>> + #hwlock-cells = <1>;
>> + };
>> +
>> + pdc: interrupt-controller@b220000 {
>> + compatible = "qcom,sdx75-pdc", "qcom,pdc";
>> + reg = <0x0 0xb220000 0x0 0x30000>,
>> + <0x0 0x174000f0 0x0 0x64>;
>> + qcom,pdc-ranges = <0 147 52>,
>> + <52 266 32>,
>> + <84 500 59>;
>> + #interrupt-cells = <2>;
>> + interrupt-parent = <&intc>;
>> + interrupt-controller;
>> + };
>> +
>> + tlmm: pinctrl@f000000 {
>> + compatible = "qcom,sdx75-tlmm";
>> + reg = <0x0 0x0f000000 0x0 0x400000>;
>> + interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + gpio-ranges = <&tlmm 0 0 133>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + wakeup-parent = <&pdc>;
>> + };
>> +
>> + apps_smmu: iommu@15000000 {
>> + compatible = "qcom,sdx75-smmu-500", "arm,mmu-500";
>> + reg = <0x0 0x15000000 0x0 0x40000>;
>> + #iommu-cells = <2>;
>> + #global-interrupts = <2>;
>> + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
> Many newer SoCs have dma-coherent SMMUs. Is this the case here?
Yes, Will add the dma-coherent property here.
>
>> + };
>> +
>> + intc: interrupt-controller@17200000 {
>> + compatible = "arm,gic-v3";
>> + #interrupt-cells = <3>;
>> + interrupt-controller;
>> + #redistributor-regions = <1>;
>> + redistributor-stride = <0x0 0x20000>;
>> + reg = <0x0 0x17200000 0x0 0x10000>,
>> + <0x0 0x17260000 0x0 0x80000>;
>> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
>> + };
>> +
>> + timer@17420000 {
>> + compatible = "arm,armv7-timer-mem";
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> + reg = <0x0 0x17420000 0x0 0x1000>;
>> + clock-frequency = <19200000>;
> clock-frequency is discouraged, unless strictly necessary.
>
> Since gh is running, the timer is already programmed so it should be
> fine to drop this.
>
> [...]
>
>> + timer {
>> + compatible = "arm,armv8-timer";
>> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
>> + clock-frequency = <19200000>;
> Ditto
Ok Thanks for the info. Dropping the clock frequency property in the
next version.

Thanks,
Rohit.
>
> Konrad
>> + };
>> +};

2023-05-30 18:18:30

by Konrad Dybcio

[permalink] [raw]
Subject: Re: [PATCH 5/8] arm64: dts: qcom: Add SDX75 platform and IDP board support



On 30.05.2023 13:40, Rohit Agarwal wrote:
> Thanks for reviewing. Sorry for the late reply was on leave.
>
> On 5/19/2023 10:58 PM, Konrad Dybcio wrote:
>>
>> On 19.05.2023 11:09, Rohit Agarwal wrote:
>>> Add basic devicetree support for SDX75 platform and IDP board from
>>> Qualcomm. The SDX75 platform features an ARM Cortex A55 CPU which forms
>>> the Application Processor Sub System (APSS) along with standard Qualcomm
>>> peripherals like GCC, TLMM, UART, QPIC, and BAM etc... Also, there
>>> exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
>>> etc..
>>>
>>> This commit adds basic devicetree support.
>>>
>>> Signed-off-by: Rohit Agarwal <[email protected]>
>>> ---
>>>   arch/arm64/boot/dts/qcom/Makefile      |   1 +
>>>   arch/arm64/boot/dts/qcom/sdx75-idp.dts |  19 ++
>>>   arch/arm64/boot/dts/qcom/sdx75.dtsi    | 534 +++++++++++++++++++++++++++++++++
>>>   3 files changed, 554 insertions(+)
>>>   create mode 100644 arch/arm64/boot/dts/qcom/sdx75-idp.dts
>>>   create mode 100644 arch/arm64/boot/dts/qcom/sdx75.dtsi
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>>> index d42c595..4fd5a18 100644
>>> --- a/arch/arm64/boot/dts/qcom/Makefile
>>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>>> @@ -173,6 +173,7 @@ dtb-$(CONFIG_ARCH_QCOM)    += sdm845-xiaomi-polaris.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)    += sdm845-shift-axolotl.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)    += sdm850-lenovo-yoga-c630.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)    += sdm850-samsung-w737.dtb
>>> +dtb-$(CONFIG_ARCH_QCOM)    += sdx75-idp.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)    += sm4250-oneplus-billie2.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)    += sm6115p-lenovo-j606f.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)    += sm6125-sony-xperia-seine-pdx201.dtb
>>> diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
>>> new file mode 100644
>>> index 0000000..e2e803b
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
>>> @@ -0,0 +1,19 @@
>>> +// SPDX-License-Identifier: BSD-3-Clause
>>> +/*
>>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
>>> + */
>>> +
>>> +/dts-v1/;
>>> +
>>> +#include "sdx75.dtsi"
>>> +
>>> +/ {
>>> +    model = "Qualcomm Technologies, Inc. SDX75 IDP";
>>> +    compatible = "qcom,sdx75-idp", "qcom,sdx75";
>>> +    qcom,board-id = <0x2010022 0x302>;
>> You should be able to get by without qcom,{msm,board}-id.
> Actually the bootloader requires the msm and board id. Shouldn't this become a necessary field then?
We generally discourage that, especially since at least on the LA front
it became unnecessary (no msm-id and appended dtb -> abl picks the only
one present).. I'm not sure at what point in product dev the SDX75 is,
but if we could get rid of that requirement, it'd be very nice..

OTOH getting rid of it just on one device and keeping it necessary with
fw builds that have been distributed to vendors sounds wouldn't be
very beneficial either :/


Konrad
>>
>>> +
>>> +};
>>> +
>>> +&tlmm {
>>> +    gpio-reserved-ranges = <110 6>;
>>> +};
>>> diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi
>>> new file mode 100644
>>> index 0000000..c2b8810
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi
>>> @@ -0,0 +1,534 @@
>>> +// SPDX-License-Identifier: BSD-3-Clause
>>> +/*
>>> + * SDX75 SoC device tree source
>>> + *
>>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
>>> + *
>>> + */
>>> +
>>> +#include <dt-bindings/clock/qcom,rpmh.h>
>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
>>> +
>>> +/ {
>>> +    #address-cells = <2>;
>>> +    #size-cells = <2>;
>>> +    qcom,msm-id = <556 0x10000>;
>>> +    interrupt-parent = <&intc>;
>>> +
>>> +    chosen: chosen { };
>>> +
>>> +    memory {
>> The memory node should have a unit address.
> Sure will update this.
>>
>>> +        device_type = "memory";
>>> +        reg = <0 0 0 0>;
>>> +    };
>>> +
>>> +    clocks { };
>>> +
>>> +    cpus {
>>> +        #address-cells = <2>;
>>> +        #size-cells = <0>;
>>> +
>> [...]
>>
>>> +
>>> +        CLUSTER_PD: power-domain-cpu-cluster0 {
>>> +            #power-domain-cells = <0>;
>>> +            domain-idle-states = <&CLUSTER_SLEEP_0 &CX_RET &CLUSTER_SLEEP_1>;
>> Is CLUSTER_SLEEP_1 deeper than CX retention?
> Yes
>>
>>> +        };
>>> +    };
>>> +
>>> +    firmware {
>>> +        scm: scm {
>>> +            compatible = "qcom,scm-sdx75", "qcom,scm";
>>> +        };
>>> +    };
>>> +
>>> +    pmu {
>>> +        compatible = "arm,armv8-pmuv3";
>>> +        interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
>>> +    };
>>> +
>>> +    reserved-memory {
>>> +        #address-cells = <2>;
>>> +        #size-cells = <2>;
>>> +        ranges;
>>> +
>>> +        gunyah_hyp_mem: memory@80000000 {
>> reserved memory subnodes should have meaningful node names, e.g.
>>
>> hypervisor@800...
> Will update this.
>>
>>> +            reg = <0x0 0x80000000 0x0 0x800000>;
>>> +            no-map;
>>> +        };
>>> +
>> [...]
>>
>>> +
>>> +    smem: qcom,smem {
>>> +        compatible = "qcom,smem";
>>> +        memory-region = <&smem_mem>;
>>> +        hwlocks = <&tcsr_mutex 3>;
>>> +    };
>>> +
>>> +    soc: soc {
>>> +        #address-cells = <2>;
>>> +        #size-cells = <2>;
>>> +        ranges;
>> Are the SoC buses limited to 32b addresses?
> No, Will fix this in the next.
>>
>>> +        compatible = "simple-bus";
>> Compatible should go first.
> Yes, Ok.
>>> +
>>> +        tcsr_mutex: hwlock@1f40000 {
>>> +            compatible = "qcom,tcsr-mutex";
>>> +            reg = <0x0 0x01f40000 0x0 0x40000>;
>>> +            #hwlock-cells = <1>;
>>> +        };
>>> +
>>> +        pdc: interrupt-controller@b220000 {
>>> +            compatible = "qcom,sdx75-pdc", "qcom,pdc";
>>> +            reg = <0x0 0xb220000 0x0 0x30000>,
>>> +                  <0x0 0x174000f0 0x0 0x64>;
>>> +            qcom,pdc-ranges = <0 147 52>,
>>> +                      <52 266 32>,
>>> +                      <84 500 59>;
>>> +            #interrupt-cells = <2>;
>>> +            interrupt-parent = <&intc>;
>>> +            interrupt-controller;
>>> +        };
>>> +
>>> +        tlmm: pinctrl@f000000 {
>>> +            compatible = "qcom,sdx75-tlmm";
>>> +            reg = <0x0 0x0f000000 0x0 0x400000>;
>>> +            interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
>>> +            gpio-controller;
>>> +            #gpio-cells = <2>;
>>> +            gpio-ranges = <&tlmm 0 0 133>;
>>> +            interrupt-controller;
>>> +            #interrupt-cells = <2>;
>>> +            wakeup-parent = <&pdc>;
>>> +        };
>>> +
>>> +        apps_smmu: iommu@15000000 {
>>> +            compatible = "qcom,sdx75-smmu-500", "arm,mmu-500";
>>> +            reg = <0x0 0x15000000 0x0 0x40000>;
>>> +            #iommu-cells = <2>;
>>> +            #global-interrupts = <2>;
>>> +            interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
>> Many newer SoCs have dma-coherent SMMUs. Is this the case here?
> Yes, Will add the dma-coherent property here.
>>
>>> +        };
>>> +
>>> +        intc: interrupt-controller@17200000 {
>>> +            compatible = "arm,gic-v3";
>>> +            #interrupt-cells = <3>;
>>> +            interrupt-controller;
>>> +            #redistributor-regions = <1>;
>>> +            redistributor-stride = <0x0 0x20000>;
>>> +            reg = <0x0 0x17200000 0x0 0x10000>,
>>> +                  <0x0 0x17260000 0x0 0x80000>;
>>> +            interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
>>> +        };
>>> +
>>> +        timer@17420000 {
>>> +            compatible = "arm,armv7-timer-mem";
>>> +            #address-cells = <2>;
>>> +            #size-cells = <2>;
>>> +            ranges;
>>> +            reg = <0x0 0x17420000 0x0 0x1000>;
>>> +            clock-frequency = <19200000>;
>> clock-frequency is discouraged, unless strictly necessary.
>>
>> Since gh is running, the timer is already programmed so it should be
>> fine to drop this.
>>
>> [...]
>>
>>> +    timer {
>>> +        compatible = "arm,armv8-timer";
>>> +        interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>> +                 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>> +                 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>> +                 <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
>>> +        clock-frequency = <19200000>;
>> Ditto
> Ok Thanks for the info. Dropping the clock frequency property in the next version.
>
> Thanks,
> Rohit.
>>
>> Konrad
>>> +    };
>>> +};

2023-06-05 07:02:41

by Rohit Agarwal

[permalink] [raw]
Subject: Re: [PATCH 5/8] arm64: dts: qcom: Add SDX75 platform and IDP board support


On 5/30/2023 11:19 PM, Konrad Dybcio wrote:
>
> On 30.05.2023 13:40, Rohit Agarwal wrote:
>> Thanks for reviewing. Sorry for the late reply was on leave.
>>
>> On 5/19/2023 10:58 PM, Konrad Dybcio wrote:
>>> On 19.05.2023 11:09, Rohit Agarwal wrote:
>>>> Add basic devicetree support for SDX75 platform and IDP board from
>>>> Qualcomm. The SDX75 platform features an ARM Cortex A55 CPU which forms
>>>> the Application Processor Sub System (APSS) along with standard Qualcomm
>>>> peripherals like GCC, TLMM, UART, QPIC, and BAM etc... Also, there
>>>> exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
>>>> etc..
>>>>
>>>> This commit adds basic devicetree support.
>>>>
>>>> Signed-off-by: Rohit Agarwal <[email protected]>
>>>> ---
>>>>   arch/arm64/boot/dts/qcom/Makefile      |   1 +
>>>>   arch/arm64/boot/dts/qcom/sdx75-idp.dts |  19 ++
>>>>   arch/arm64/boot/dts/qcom/sdx75.dtsi    | 534 +++++++++++++++++++++++++++++++++
>>>>   3 files changed, 554 insertions(+)
>>>>   create mode 100644 arch/arm64/boot/dts/qcom/sdx75-idp.dts
>>>>   create mode 100644 arch/arm64/boot/dts/qcom/sdx75.dtsi
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>>>> index d42c595..4fd5a18 100644
>>>> --- a/arch/arm64/boot/dts/qcom/Makefile
>>>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>>>> @@ -173,6 +173,7 @@ dtb-$(CONFIG_ARCH_QCOM)    += sdm845-xiaomi-polaris.dtb
>>>>   dtb-$(CONFIG_ARCH_QCOM)    += sdm845-shift-axolotl.dtb
>>>>   dtb-$(CONFIG_ARCH_QCOM)    += sdm850-lenovo-yoga-c630.dtb
>>>>   dtb-$(CONFIG_ARCH_QCOM)    += sdm850-samsung-w737.dtb
>>>> +dtb-$(CONFIG_ARCH_QCOM)    += sdx75-idp.dtb
>>>>   dtb-$(CONFIG_ARCH_QCOM)    += sm4250-oneplus-billie2.dtb
>>>>   dtb-$(CONFIG_ARCH_QCOM)    += sm6115p-lenovo-j606f.dtb
>>>>   dtb-$(CONFIG_ARCH_QCOM)    += sm6125-sony-xperia-seine-pdx201.dtb
>>>> diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
>>>> new file mode 100644
>>>> index 0000000..e2e803b
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
>>>> @@ -0,0 +1,19 @@
>>>> +// SPDX-License-Identifier: BSD-3-Clause
>>>> +/*
>>>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
>>>> + */
>>>> +
>>>> +/dts-v1/;
>>>> +
>>>> +#include "sdx75.dtsi"
>>>> +
>>>> +/ {
>>>> +    model = "Qualcomm Technologies, Inc. SDX75 IDP";
>>>> +    compatible = "qcom,sdx75-idp", "qcom,sdx75";
>>>> +    qcom,board-id = <0x2010022 0x302>;
>>> You should be able to get by without qcom,{msm,board}-id.
>> Actually the bootloader requires the msm and board id. Shouldn't this become a necessary field then?
> We generally discourage that, especially since at least on the LA front
> it became unnecessary (no msm-id and appended dtb -> abl picks the only
> one present).. I'm not sure at what point in product dev the SDX75 is,
> but if we could get rid of that requirement, it'd be very nice..
>
> OTOH getting rid of it just on one device and keeping it necessary with
> fw builds that have been distributed to vendors sounds wouldn't be
> very beneficial either :/
Going deeper in the ABL code, Got to know that ABL does support the
single appended DTB.
So will go ahead and remove the board-id and msm-id from this.

Thanks,
Rohit.

>
> Konrad
>>>> +
>>>> +};
>>>> +
>>>> +&tlmm {
>>>> +    gpio-reserved-ranges = <110 6>;
>>>> +};
>>>> diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi
>>>> new file mode 100644
>>>> index 0000000..c2b8810
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi
>>>> @@ -0,0 +1,534 @@
>>>> +// SPDX-License-Identifier: BSD-3-Clause
>>>> +/*
>>>> + * SDX75 SoC device tree source
>>>> + *
>>>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
>>>> + *
>>>> + */
>>>> +
>>>> +#include <dt-bindings/clock/qcom,rpmh.h>
>>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>>> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
>>>> +
>>>> +/ {
>>>> +    #address-cells = <2>;
>>>> +    #size-cells = <2>;
>>>> +    qcom,msm-id = <556 0x10000>;
>>>> +    interrupt-parent = <&intc>;
>>>> +
>>>> +    chosen: chosen { };
>>>> +
>>>> +    memory {
>>> The memory node should have a unit address.
>> Sure will update this.
>>>> +        device_type = "memory";
>>>> +        reg = <0 0 0 0>;
>>>> +    };
>>>> +
>>>> +    clocks { };
>>>> +
>>>> +    cpus {
>>>> +        #address-cells = <2>;
>>>> +        #size-cells = <0>;
>>>> +
>>> [...]
>>>
>>>> +
>>>> +        CLUSTER_PD: power-domain-cpu-cluster0 {
>>>> +            #power-domain-cells = <0>;
>>>> +            domain-idle-states = <&CLUSTER_SLEEP_0 &CX_RET &CLUSTER_SLEEP_1>;
>>> Is CLUSTER_SLEEP_1 deeper than CX retention?
>> Yes
>>>> +        };
>>>> +    };
>>>> +
>>>> +    firmware {
>>>> +        scm: scm {
>>>> +            compatible = "qcom,scm-sdx75", "qcom,scm";
>>>> +        };
>>>> +    };
>>>> +
>>>> +    pmu {
>>>> +        compatible = "arm,armv8-pmuv3";
>>>> +        interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
>>>> +    };
>>>> +
>>>> +    reserved-memory {
>>>> +        #address-cells = <2>;
>>>> +        #size-cells = <2>;
>>>> +        ranges;
>>>> +
>>>> +        gunyah_hyp_mem: memory@80000000 {
>>> reserved memory subnodes should have meaningful node names, e.g.
>>>
>>> hypervisor@800...
>> Will update this.
>>>> +            reg = <0x0 0x80000000 0x0 0x800000>;
>>>> +            no-map;
>>>> +        };
>>>> +
>>> [...]
>>>
>>>> +
>>>> +    smem: qcom,smem {
>>>> +        compatible = "qcom,smem";
>>>> +        memory-region = <&smem_mem>;
>>>> +        hwlocks = <&tcsr_mutex 3>;
>>>> +    };
>>>> +
>>>> +    soc: soc {
>>>> +        #address-cells = <2>;
>>>> +        #size-cells = <2>;
>>>> +        ranges;
>>> Are the SoC buses limited to 32b addresses?
>> No, Will fix this in the next.
>>>> +        compatible = "simple-bus";
>>> Compatible should go first.
>> Yes, Ok.
>>>> +
>>>> +        tcsr_mutex: hwlock@1f40000 {
>>>> +            compatible = "qcom,tcsr-mutex";
>>>> +            reg = <0x0 0x01f40000 0x0 0x40000>;
>>>> +            #hwlock-cells = <1>;
>>>> +        };
>>>> +
>>>> +        pdc: interrupt-controller@b220000 {
>>>> +            compatible = "qcom,sdx75-pdc", "qcom,pdc";
>>>> +            reg = <0x0 0xb220000 0x0 0x30000>,
>>>> +                  <0x0 0x174000f0 0x0 0x64>;
>>>> +            qcom,pdc-ranges = <0 147 52>,
>>>> +                      <52 266 32>,
>>>> +                      <84 500 59>;
>>>> +            #interrupt-cells = <2>;
>>>> +            interrupt-parent = <&intc>;
>>>> +            interrupt-controller;
>>>> +        };
>>>> +
>>>> +        tlmm: pinctrl@f000000 {
>>>> +            compatible = "qcom,sdx75-tlmm";
>>>> +            reg = <0x0 0x0f000000 0x0 0x400000>;
>>>> +            interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
>>>> +            gpio-controller;
>>>> +            #gpio-cells = <2>;
>>>> +            gpio-ranges = <&tlmm 0 0 133>;
>>>> +            interrupt-controller;
>>>> +            #interrupt-cells = <2>;
>>>> +            wakeup-parent = <&pdc>;
>>>> +        };
>>>> +
>>>> +        apps_smmu: iommu@15000000 {
>>>> +            compatible = "qcom,sdx75-smmu-500", "arm,mmu-500";
>>>> +            reg = <0x0 0x15000000 0x0 0x40000>;
>>>> +            #iommu-cells = <2>;
>>>> +            #global-interrupts = <2>;
>>>> +            interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
>>> Many newer SoCs have dma-coherent SMMUs. Is this the case here?
>> Yes, Will add the dma-coherent property here.
>>>> +        };
>>>> +
>>>> +        intc: interrupt-controller@17200000 {
>>>> +            compatible = "arm,gic-v3";
>>>> +            #interrupt-cells = <3>;
>>>> +            interrupt-controller;
>>>> +            #redistributor-regions = <1>;
>>>> +            redistributor-stride = <0x0 0x20000>;
>>>> +            reg = <0x0 0x17200000 0x0 0x10000>,
>>>> +                  <0x0 0x17260000 0x0 0x80000>;
>>>> +            interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
>>>> +        };
>>>> +
>>>> +        timer@17420000 {
>>>> +            compatible = "arm,armv7-timer-mem";
>>>> +            #address-cells = <2>;
>>>> +            #size-cells = <2>;
>>>> +            ranges;
>>>> +            reg = <0x0 0x17420000 0x0 0x1000>;
>>>> +            clock-frequency = <19200000>;
>>> clock-frequency is discouraged, unless strictly necessary.
>>>
>>> Since gh is running, the timer is already programmed so it should be
>>> fine to drop this.
>>>
>>> [...]
>>>
>>>> +    timer {
>>>> +        compatible = "arm,armv8-timer";
>>>> +        interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>> +                 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>> +                 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>> +                 <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
>>>> +        clock-frequency = <19200000>;
>>> Ditto
>> Ok Thanks for the info. Dropping the clock frequency property in the next version.
>>
>> Thanks,
>> Rohit.
>>> Konrad
>>>> +    };
>>>> +};

2023-06-05 17:20:16

by Will Deacon

[permalink] [raw]
Subject: Re: [PATCH 0/8] Add devicetree support for SDX75 Modem and IDP

On Fri, 19 May 2023 14:39:02 +0530, Rohit Agarwal wrote:
> This series adds devicetree support for Qualcomm SDX75 platform and IDP
> board. This series functionally depends on GCC and RPMh Clock support
> series [1], and pinctrl support for SDX75 [2] which are under review.
>
> With this current devicetree support, the IDP can boot into initramfsshell.
>
> [1] https://lore.kernel.org/lkml/[email protected]/
> [2] https://lore.kernel.org/all/[email protected]/
>
> [...]

Applied bindings patch to will (for-joerg/arm-smmu/bindings), thanks!

[4/8] dt-bindings: arm-smmu: Add SDX75 SMMU compatible
https://git.kernel.org/will/c/48989c0b25ca

Cheers,
--
Will

https://fixes.arm64.dev
https://next.arm64.dev
https://will.arm64.dev