Enable the debug uart console for the SDX75 IDP board.
Signed-off-by: Rohit Agarwal <[email protected]>
---
arch/arm64/boot/dts/qcom/sdx75-idp.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
index e2e803b..e07c9e0 100644
--- a/arch/arm64/boot/dts/qcom/sdx75-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
@@ -12,8 +12,23 @@
compatible = "qcom,sdx75-idp", "qcom,sdx75";
qcom,board-id = <0x2010022 0x302>;
+ aliases {
+ serial0 = &uart1;
+ };
+};
+
+&chosen {
+ stdout-path = "serial0:115200n8";
+};
+
+&qupv3_id_0 {
+ status = "okay";
};
&tlmm {
gpio-reserved-ranges = <110 6>;
};
+
+&uart1 {
+ status = "okay";
+};
--
2.7.4