Allwinner's D1, T113s and R329 SoCs have a new general purpose ADC.
This ADC is the same for all of this SoCs. The only difference is
the number of available channels.
Signed-off-by: Maxim Kiselev <[email protected]>
---
.../iio/adc/allwinner,sun20i-d1-gpadc.yaml | 52 +++++++++++++++++++
1 file changed, 52 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml
diff --git a/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml
new file mode 100644
index 000000000000..a79b874750dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/allwinner,sun20i-d1-gpadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner D1 General Purpose ADC
+
+properties:
+ "#io-channel-cells":
+ const: 0
+
+ clocks:
+ maxItems: 1
+
+ compatible:
+ enum:
+ - allwinner,sun20i-d1-gpadc
+ - allwinner,sun8i-t113-gpadc
+ - allwinner,sun50i-r329-gpadc
+
+ interrupts:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+required:
+ - "#io-channel-cells"
+ - clocks
+ - compatible
+ - interrupts
+ - reg
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ gpadc: adc@2009000 {
+ compatible = "allwinner,sun20i-d1-gpadc";
+ reg = <0x2009000 0x1000>;
+ clocks = <&ccu CLK_BUS_GPADC>;
+ resets = <&ccu RST_BUS_GPADC>;
+ interrupts = <SOC_PERIPHERAL_IRQ(57) IRQ_TYPE_LEVEL_HIGH>;
+ #io-channel-cells = <0>;
+ };
+
+...
--
2.39.2
On Wed, 24 May 2023 11:27:31 +0300, Maxim Kiselev wrote:
> Allwinner's D1, T113s and R329 SoCs have a new general purpose ADC.
> This ADC is the same for all of this SoCs. The only difference is
> the number of available channels.
>
> Signed-off-by: Maxim Kiselev <[email protected]>
> ---
> .../iio/adc/allwinner,sun20i-d1-gpadc.yaml | 52 +++++++++++++++++++
> 1 file changed, 52 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml: 'maintainers' is a required property
hint: Metaschema for devicetree binding documentation
from schema $id: http://devicetree.org/meta-schemas/base.yaml#
Error: Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.example.dts:27.28-29 syntax error
FATAL ERROR: Unable to parse input tree
make[1]: *** [scripts/Makefile.lib:419: Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.example.dtb] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1512: dt_binding_check] Error 2
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
On Wed, 24 May 2023 11:27:31 +0300
Maxim Kiselev <[email protected]> wrote:
> Allwinner's D1, T113s and R329 SoCs have a new general purpose ADC.
> This ADC is the same for all of this SoCs. The only difference is
> the number of available channels.
>
> Signed-off-by: Maxim Kiselev <[email protected]>
> ---
> .../iio/adc/allwinner,sun20i-d1-gpadc.yaml | 52 +++++++++++++++++++
> 1 file changed, 52 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml
> new file mode 100644
> index 000000000000..a79b874750dd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml
> @@ -0,0 +1,52 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/adc/allwinner,sun20i-d1-gpadc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Allwinner D1 General Purpose ADC
> +
> +properties:
> + "#io-channel-cells":
> + const: 0
That's odd for a device with more than one channel. How do you reference
which channel you want to consume?
> +
> + clocks:
> + maxItems: 1
> +
> + compatible:
> + enum:
> + - allwinner,sun20i-d1-gpadc
> + - allwinner,sun8i-t113-gpadc
> + - allwinner,sun50i-r329-gpadc
> +
> + interrupts:
> + maxItems: 1
> +
> + reg:
> + maxItems: 1
> +
> + resets:
> + maxItems: 1
> +
> +required:
> + - "#io-channel-cells"
> + - clocks
> + - compatible
> + - interrupts
> + - reg
> + - resets
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + gpadc: adc@2009000 {
> + compatible = "allwinner,sun20i-d1-gpadc";
> + reg = <0x2009000 0x1000>;
> + clocks = <&ccu CLK_BUS_GPADC>;
> + resets = <&ccu RST_BUS_GPADC>;
> + interrupts = <SOC_PERIPHERAL_IRQ(57) IRQ_TYPE_LEVEL_HIGH>;
I guess the bot probably got this, but to use these macros you need some includes.
> + #io-channel-cells = <0>;
> + };
> +
> +...