2023-05-10 10:54:09

by Devi Priya

[permalink] [raw]
Subject: [PATCH 0/2] Add initial support for RDP418 of IPQ9574 family

Add the initial device tree support for the Reference Design
Platform(RDP) 418 based on IPQ9574 family of SoC. This patch series adds
support for Console UART, SPI NOR, eMMC and SMPA1 regulator node.

Devi Priya (2):
dt-bindings: arm: qcom: document AL02-C2 board based on IPQ9574 family
arm64: dts: qcom: ipq9574: add support for RDP418 variant

.../devicetree/bindings/arm/qcom.yaml | 2 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts | 124 ++++++++++++++++++
3 files changed, 127 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts


base-commit: 52025ebbb518a2d876b8aba191b348ffb1cf368b
--
2.17.1



2023-05-16 14:19:30

by Devi Priya

[permalink] [raw]
Subject: Re: [PATCH 0/2] Add initial support for RDP418 of IPQ9574 family



On 5/10/2023 4:13 PM, Devi Priya wrote:
> Add the initial device tree support for the Reference Design
> Platform(RDP) 418 based on IPQ9574 family of SoC. This patch series adds
> support for Console UART, SPI NOR, eMMC and SMPA1 regulator node.
>
This series depends on the below patch sets which adds support for
SPI NOR and SMPA1 regulator nodes.
https://lore.kernel.org/linux-arm-msm/[email protected]/
https://lore.kernel.org/linux-arm-msm/[email protected]/

Thanks,
Devi Priya
> Devi Priya (2):
> dt-bindings: arm: qcom: document AL02-C2 board based on IPQ9574 family
> arm64: dts: qcom: ipq9574: add support for RDP418 variant
>
> .../devicetree/bindings/arm/qcom.yaml | 2 +
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts | 124 ++++++++++++++++++
> 3 files changed, 127 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts
>
>
> base-commit: 52025ebbb518a2d876b8aba191b348ffb1cf368b

2023-05-26 19:38:09

by Bjorn Andersson

[permalink] [raw]
Subject: Re: [PATCH 0/2] Add initial support for RDP418 of IPQ9574 family

On Wed, 10 May 2023 16:13:57 +0530, Devi Priya wrote:
> Add the initial device tree support for the Reference Design
> Platform(RDP) 418 based on IPQ9574 family of SoC. This patch series adds
> support for Console UART, SPI NOR, eMMC and SMPA1 regulator node.
>
> Devi Priya (2):
> dt-bindings: arm: qcom: document AL02-C2 board based on IPQ9574 family
> arm64: dts: qcom: ipq9574: add support for RDP418 variant
>
> [...]

Applied, thanks!

[1/2] dt-bindings: arm: qcom: document AL02-C2 board based on IPQ9574 family
commit: e3c98aac28bd8964031ebb057cb6e48fc492d256
[2/2] arm64: dts: qcom: ipq9574: add support for RDP418 variant
commit: d8a83f8d2e730d4e05e8fc8e1faccbee0f95ca12

Best regards,
--
Bjorn Andersson <[email protected]>