From: Sarannya S <[email protected]>
* Return EOPNOTSUPP error in rpmsg_set_flow_control(), if the backend
does not support flow control ops.
* In rpmsg_set_flow_control(), rename the variable 'enable' to 'pause'.
* Change return type of qcom_glink_handle_signals() from int to void.
* In structure 'rpmsg_eptdev' rename the boolean name 'remote_flow' to
'remote_flow_restricted'.
Chris Lew (2):
rpmsg: glink: Add support to handle signals command
rpmsg: char: Add RPMSG GET/SET FLOWCONTROL IOCTL support
Deepak Kumar Singh (1):
rpmsg: core: Add signal API support
drivers/rpmsg/qcom_glink_native.c | 56 +++++++++++++++++++++++++++++++++++++++
drivers/rpmsg/rpmsg_char.c | 50 +++++++++++++++++++++++++++++-----
drivers/rpmsg/rpmsg_core.c | 21 +++++++++++++++
drivers/rpmsg/rpmsg_internal.h | 2 ++
include/linux/rpmsg.h | 15 +++++++++++
include/uapi/linux/rpmsg.h | 10 +++++++
6 files changed, 148 insertions(+), 6 deletions(-)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
From: Chris Lew <[email protected]>
Add RPMSG_GET_OUTGOING_FLOWCONTROL and RPMSG_SET_INCOMING_FLOWCONTROL
IOCTL support for rpmsg char device nodes to get/set the low level
transport signals.
Signed-off-by: Chris Lew <[email protected]>
Signed-off-by: Deepak Kumar Singh <[email protected]>
Signed-off-by: Sarannya S <[email protected]>
---
drivers/rpmsg/rpmsg_char.c | 50 ++++++++++++++++++++++++++++++++++++++++------
include/uapi/linux/rpmsg.h | 10 ++++++++++
2 files changed, 54 insertions(+), 6 deletions(-)
diff --git a/drivers/rpmsg/rpmsg_char.c b/drivers/rpmsg/rpmsg_char.c
index a271fce..2cdd31e 100644
--- a/drivers/rpmsg/rpmsg_char.c
+++ b/drivers/rpmsg/rpmsg_char.c
@@ -52,6 +52,8 @@ static DEFINE_IDA(rpmsg_minor_ida);
* @readq: wait object for incoming queue
* @default_ept: set to channel default endpoint if the default endpoint should be re-used
* on device open to prevent endpoint address update.
+ * remote_flow_restricted: to indicate if the remote has requested for flow to be limited
+ * remote_flow_updated: to indicate if the flow control has been requested
*/
struct rpmsg_eptdev {
struct device dev;
@@ -68,6 +70,8 @@ struct rpmsg_eptdev {
struct sk_buff_head queue;
wait_queue_head_t readq;
+ bool remote_flow_restricted;
+ bool remote_flow_updated;
};
int rpmsg_chrdev_eptdev_destroy(struct device *dev, void *data)
@@ -116,6 +120,18 @@ static int rpmsg_ept_cb(struct rpmsg_device *rpdev, void *buf, int len,
return 0;
}
+static int rpmsg_ept_flow_cb(struct rpmsg_device *rpdev, void *priv, bool enable)
+{
+ struct rpmsg_eptdev *eptdev = priv;
+
+ eptdev->remote_flow_restricted = enable;
+ eptdev->remote_flow_updated = true;
+
+ wake_up_interruptible(&eptdev->readq);
+
+ return 0;
+}
+
static int rpmsg_eptdev_open(struct inode *inode, struct file *filp)
{
struct rpmsg_eptdev *eptdev = cdev_to_eptdev(inode->i_cdev);
@@ -152,6 +168,7 @@ static int rpmsg_eptdev_open(struct inode *inode, struct file *filp)
return -EINVAL;
}
+ ept->flow_cb = rpmsg_ept_flow_cb;
eptdev->ept = ept;
filp->private_data = eptdev;
mutex_unlock(&eptdev->ept_lock);
@@ -172,6 +189,7 @@ static int rpmsg_eptdev_release(struct inode *inode, struct file *filp)
eptdev->ept = NULL;
}
mutex_unlock(&eptdev->ept_lock);
+ eptdev->remote_flow_updated = false;
/* Discard all SKBs */
skb_queue_purge(&eptdev->queue);
@@ -285,6 +303,9 @@ static __poll_t rpmsg_eptdev_poll(struct file *filp, poll_table *wait)
if (!skb_queue_empty(&eptdev->queue))
mask |= EPOLLIN | EPOLLRDNORM;
+ if (eptdev->remote_flow_updated)
+ mask |= EPOLLPRI;
+
mutex_lock(&eptdev->ept_lock);
mask |= rpmsg_poll(eptdev->ept, filp, wait);
mutex_unlock(&eptdev->ept_lock);
@@ -297,14 +318,31 @@ static long rpmsg_eptdev_ioctl(struct file *fp, unsigned int cmd,
{
struct rpmsg_eptdev *eptdev = fp->private_data;
- if (cmd != RPMSG_DESTROY_EPT_IOCTL)
- return -EINVAL;
+ bool set;
+ int ret;
- /* Don't allow to destroy a default endpoint. */
- if (eptdev->default_ept)
- return -EINVAL;
+ switch (cmd) {
+ case RPMSG_GET_OUTGOING_FLOWCONTROL:
+ eptdev->remote_flow_updated = false;
+ ret = put_user(eptdev->remote_flow_restricted, (int __user *)arg);
+ break;
+ case RPMSG_SET_INCOMING_FLOWCONTROL:
+ set = !!arg;
+ ret = rpmsg_set_flow_control(eptdev->ept, set, eptdev->chinfo.dst);
+ break;
+ case RPMSG_DESTROY_EPT_IOCTL:
+ /* Don't allow to destroy a default endpoint. */
+ if (eptdev->default_ept) {
+ ret = -EINVAL;
+ break;
+ }
+ ret = rpmsg_chrdev_eptdev_destroy(&eptdev->dev, NULL);
+ break;
+ default:
+ ret = -EINVAL;
+ }
- return rpmsg_chrdev_eptdev_destroy(&eptdev->dev, NULL);
+ return ret;
}
static const struct file_operations rpmsg_eptdev_fops = {
diff --git a/include/uapi/linux/rpmsg.h b/include/uapi/linux/rpmsg.h
index 1637e68..b0a6c17 100644
--- a/include/uapi/linux/rpmsg.h
+++ b/include/uapi/linux/rpmsg.h
@@ -43,4 +43,14 @@ struct rpmsg_endpoint_info {
*/
#define RPMSG_RELEASE_DEV_IOCTL _IOW(0xb5, 0x4, struct rpmsg_endpoint_info)
+/**
+ * Set the flow control for the remote rpmsg char device.
+ */
+#define RPMSG_GET_OUTGOING_FLOWCONTROL _IOW(0xb5, 0x5, struct rpmsg_endpoint_info)
+
+/**
+ * Set the flow control for the local rpmsg char device.
+ */
+#define RPMSG_SET_INCOMING_FLOWCONTROL _IOW(0xb5, 0x6, struct rpmsg_endpoint_info)
+
#endif
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
From: Deepak Kumar Singh <[email protected]>
Some transports like Glink support the state notifications between
clients using flow control signals similar to serial protocol signals.
Local glink client drivers can send and receive flow control status
to glink clients running on remote processors.
Add APIs to support sending and receiving of flow control status by
rpmsg clients.
Signed-off-by: Deepak Kumar Singh <[email protected]>
Signed-off-by: Sarannya S <[email protected]>
---
drivers/rpmsg/rpmsg_core.c | 21 +++++++++++++++++++++
drivers/rpmsg/rpmsg_internal.h | 2 ++
include/linux/rpmsg.h | 15 +++++++++++++++
3 files changed, 38 insertions(+)
diff --git a/drivers/rpmsg/rpmsg_core.c b/drivers/rpmsg/rpmsg_core.c
index 5039df7..32b550c 100644
--- a/drivers/rpmsg/rpmsg_core.c
+++ b/drivers/rpmsg/rpmsg_core.c
@@ -331,6 +331,25 @@ int rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst,
EXPORT_SYMBOL(rpmsg_trysend_offchannel);
/**
+ * rpmsg_set_flow_control() - request remote to pause/resume transmission
+ * @ept: the rpmsg endpoint
+ * @pause: pause transmission
+ * @dst: destination address of the endpoint
+ *
+ * Return: 0 on success and an appropriate error value on failure.
+ */
+int rpmsg_set_flow_control(struct rpmsg_endpoint *ept, bool pause, u32 dst)
+{
+ if (WARN_ON(!ept))
+ return -EINVAL;
+ if (!ept->ops->set_flow_control)
+ return -EOPNOTSUPP;
+
+ return ept->ops->set_flow_control(ept, pause, dst);
+}
+EXPORT_SYMBOL_GPL(rpmsg_set_flow_control);
+
+/**
* rpmsg_get_mtu() - get maximum transmission buffer size for sending message.
* @ept: the rpmsg endpoint
*
@@ -539,6 +558,8 @@ static int rpmsg_dev_probe(struct device *dev)
rpdev->ept = ept;
rpdev->src = ept->addr;
+
+ ept->flow_cb = rpdrv->flowcontrol;
}
err = rpdrv->probe(rpdev);
diff --git a/drivers/rpmsg/rpmsg_internal.h b/drivers/rpmsg/rpmsg_internal.h
index 39b646d..b6efd3e 100644
--- a/drivers/rpmsg/rpmsg_internal.h
+++ b/drivers/rpmsg/rpmsg_internal.h
@@ -55,6 +55,7 @@ struct rpmsg_device_ops {
* @trysendto: see @rpmsg_trysendto(), optional
* @trysend_offchannel: see @rpmsg_trysend_offchannel(), optional
* @poll: see @rpmsg_poll(), optional
+ * @set_flow_control: see @rpmsg_set_flow_control(), optional
* @get_mtu: see @rpmsg_get_mtu(), optional
*
* Indirection table for the operations that a rpmsg backend should implement.
@@ -75,6 +76,7 @@ struct rpmsg_endpoint_ops {
void *data, int len);
__poll_t (*poll)(struct rpmsg_endpoint *ept, struct file *filp,
poll_table *wait);
+ int (*set_flow_control)(struct rpmsg_endpoint *ept, bool enable, u32 dst);
ssize_t (*get_mtu)(struct rpmsg_endpoint *ept);
};
diff --git a/include/linux/rpmsg.h b/include/linux/rpmsg.h
index 523c98b..edd7c5f 100644
--- a/include/linux/rpmsg.h
+++ b/include/linux/rpmsg.h
@@ -64,12 +64,14 @@ struct rpmsg_device {
};
typedef int (*rpmsg_rx_cb_t)(struct rpmsg_device *, void *, int, void *, u32);
+typedef int (*rpmsg_flowcontrol_cb_t)(struct rpmsg_device *, void *, bool);
/**
* struct rpmsg_endpoint - binds a local rpmsg address to its user
* @rpdev: rpmsg channel device
* @refcount: when this drops to zero, the ept is deallocated
* @cb: rx callback handler
+ * @flow_cb: remote flow control callback handler
* @cb_lock: must be taken before accessing/changing @cb
* @addr: local rpmsg address
* @priv: private data for the driver's use
@@ -92,6 +94,7 @@ struct rpmsg_endpoint {
struct rpmsg_device *rpdev;
struct kref refcount;
rpmsg_rx_cb_t cb;
+ rpmsg_flowcontrol_cb_t flow_cb;
struct mutex cb_lock;
u32 addr;
void *priv;
@@ -106,6 +109,7 @@ struct rpmsg_endpoint {
* @probe: invoked when a matching rpmsg channel (i.e. device) is found
* @remove: invoked when the rpmsg channel is removed
* @callback: invoked when an inbound message is received on the channel
+ * @flowcontrol: invoked when remote side flow control status/request is received
*/
struct rpmsg_driver {
struct device_driver drv;
@@ -113,6 +117,7 @@ struct rpmsg_driver {
int (*probe)(struct rpmsg_device *dev);
void (*remove)(struct rpmsg_device *dev);
int (*callback)(struct rpmsg_device *, void *, int, void *, u32);
+ int (*flowcontrol)(struct rpmsg_device *, void *, bool);
};
static inline u16 rpmsg16_to_cpu(struct rpmsg_device *rpdev, __rpmsg16 val)
@@ -192,6 +197,8 @@ __poll_t rpmsg_poll(struct rpmsg_endpoint *ept, struct file *filp,
ssize_t rpmsg_get_mtu(struct rpmsg_endpoint *ept);
+int rpmsg_set_flow_control(struct rpmsg_endpoint *ept, bool enable, u32 dst);
+
#else
static inline int rpmsg_register_device_override(struct rpmsg_device *rpdev,
@@ -316,6 +323,14 @@ static inline ssize_t rpmsg_get_mtu(struct rpmsg_endpoint *ept)
return -ENXIO;
}
+static inline int rpmsg_set_flow_control(struct rpmsg_endpoint *ept, bool enable, u32 dst)
+{
+ /* This shouldn't be possible */
+ WARN_ON(1);
+
+ return -ENXIO;
+}
+
#endif /* IS_ENABLED(CONFIG_RPMSG) */
/* use a macro to avoid include chaining to get THIS_MODULE */
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
On 6/21/23 17:34, Sarannya S wrote:
> From: Chris Lew <[email protected]>
>
> Add RPMSG_GET_OUTGOING_FLOWCONTROL and RPMSG_SET_INCOMING_FLOWCONTROL
> IOCTL support for rpmsg char device nodes to get/set the low level
> transport signals.
>
> Signed-off-by: Chris Lew <[email protected]>
> Signed-off-by: Deepak Kumar Singh <[email protected]>
> Signed-off-by: Sarannya S <[email protected]>
> ---
> drivers/rpmsg/rpmsg_char.c | 50 ++++++++++++++++++++++++++++++++++++++++------
> include/uapi/linux/rpmsg.h | 10 ++++++++++
> 2 files changed, 54 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/rpmsg/rpmsg_char.c b/drivers/rpmsg/rpmsg_char.c
> index a271fce..2cdd31e 100644
> --- a/drivers/rpmsg/rpmsg_char.c
> +++ b/drivers/rpmsg/rpmsg_char.c
> @@ -52,6 +52,8 @@ static DEFINE_IDA(rpmsg_minor_ida);
> * @readq: wait object for incoming queue
> * @default_ept: set to channel default endpoint if the default endpoint should be re-used
> * on device open to prevent endpoint address update.
> + * remote_flow_restricted: to indicate if the remote has requested for flow to be limited
> + * remote_flow_updated: to indicate if the flow control has been requested
replace tab by space after ':'
> */
> struct rpmsg_eptdev {
> struct device dev;
> @@ -68,6 +70,8 @@ struct rpmsg_eptdev {
> struct sk_buff_head queue;
> wait_queue_head_t readq;
>
> + bool remote_flow_restricted;
> + bool remote_flow_updated;
> };
>
> int rpmsg_chrdev_eptdev_destroy(struct device *dev, void *data)
> @@ -116,6 +120,18 @@ static int rpmsg_ept_cb(struct rpmsg_device *rpdev, void *buf, int len,
> return 0;
> }
>
> +static int rpmsg_ept_flow_cb(struct rpmsg_device *rpdev, void *priv, bool enable)
> +{
> + struct rpmsg_eptdev *eptdev = priv;
> +
> + eptdev->remote_flow_restricted = enable;
> + eptdev->remote_flow_updated = true;
> +
> + wake_up_interruptible(&eptdev->readq);
> +
> + return 0;
> +}
> +
> static int rpmsg_eptdev_open(struct inode *inode, struct file *filp)
> {
> struct rpmsg_eptdev *eptdev = cdev_to_eptdev(inode->i_cdev);
> @@ -152,6 +168,7 @@ static int rpmsg_eptdev_open(struct inode *inode, struct file *filp)
> return -EINVAL;
> }
>
> + ept->flow_cb = rpmsg_ept_flow_cb;
> eptdev->ept = ept;
> filp->private_data = eptdev;
> mutex_unlock(&eptdev->ept_lock);
> @@ -172,6 +189,7 @@ static int rpmsg_eptdev_release(struct inode *inode, struct file *filp)
> eptdev->ept = NULL;
> }
> mutex_unlock(&eptdev->ept_lock);
> + eptdev->remote_flow_updated = false;
>
> /* Discard all SKBs */
> skb_queue_purge(&eptdev->queue);
> @@ -285,6 +303,9 @@ static __poll_t rpmsg_eptdev_poll(struct file *filp, poll_table *wait)
> if (!skb_queue_empty(&eptdev->queue))
> mask |= EPOLLIN | EPOLLRDNORM;
>
> + if (eptdev->remote_flow_updated)
> + mask |= EPOLLPRI;
> +
> mutex_lock(&eptdev->ept_lock);
> mask |= rpmsg_poll(eptdev->ept, filp, wait);
> mutex_unlock(&eptdev->ept_lock);
> @@ -297,14 +318,31 @@ static long rpmsg_eptdev_ioctl(struct file *fp, unsigned int cmd,
> {
> struct rpmsg_eptdev *eptdev = fp->private_data;
>
> - if (cmd != RPMSG_DESTROY_EPT_IOCTL)
> - return -EINVAL;
> + bool set;
> + int ret;
>
> - /* Don't allow to destroy a default endpoint. */
> - if (eptdev->default_ept)
> - return -EINVAL;
> + switch (cmd) {
> + case RPMSG_GET_OUTGOING_FLOWCONTROL:
> + eptdev->remote_flow_updated = false;
> + ret = put_user(eptdev->remote_flow_restricted, (int __user *)arg);
> + break;
> + case RPMSG_SET_INCOMING_FLOWCONTROL:
> + set = !!arg;
> + ret = rpmsg_set_flow_control(eptdev->ept, set, eptdev->chinfo.dst);
> + break;
> + case RPMSG_DESTROY_EPT_IOCTL:
> + /* Don't allow to destroy a default endpoint. */
> + if (eptdev->default_ept) {
> + ret = -EINVAL;
> + break;
> + }
> + ret = rpmsg_chrdev_eptdev_destroy(&eptdev->dev, NULL);
> + break;
> + default:
> + ret = -EINVAL;
> + }
>
> - return rpmsg_chrdev_eptdev_destroy(&eptdev->dev, NULL);
> + return ret;
> }
>
> static const struct file_operations rpmsg_eptdev_fops = {
> diff --git a/include/uapi/linux/rpmsg.h b/include/uapi/linux/rpmsg.h
> index 1637e68..b0a6c17 100644
> --- a/include/uapi/linux/rpmsg.h
> +++ b/include/uapi/linux/rpmsg.h
> @@ -43,4 +43,14 @@ struct rpmsg_endpoint_info {
> */
> #define RPMSG_RELEASE_DEV_IOCTL _IOW(0xb5, 0x4, struct rpmsg_endpoint_info)
>
> +/**
> + * Set the flow control for the remote rpmsg char device.
> + */
> +#define RPMSG_GET_OUTGOING_FLOWCONTROL _IOW(0xb5, 0x5, struct rpmsg_endpoint_info)
> +
> +/**
> + * Set the flow control for the local rpmsg char device.
> + */
> +#define RPMSG_SET_INCOMING_FLOWCONTROL _IOW(0xb5, 0x6, struct rpmsg_endpoint_info)
Perhaps I missed something, but you use "rpmsg_endpoint_info" as argument.
In rpmsg_eptdev_ioctl the argument is treated as a boolean.
Seems to me that something is wrong here.
regards,
Arnaud
> +
> #endif
hi Sarannya;
On 6/21/23 17:34, Sarannya S wrote:
> From: Deepak Kumar Singh <[email protected]>
>
> Some transports like Glink support the state notifications between
> clients using flow control signals similar to serial protocol signals.
> Local glink client drivers can send and receive flow control status
> to glink clients running on remote processors.
>
> Add APIs to support sending and receiving of flow control status by
> rpmsg clients.
>
> Signed-off-by: Deepak Kumar Singh <[email protected]>
> Signed-off-by: Sarannya S <[email protected]>
> ---
> drivers/rpmsg/rpmsg_core.c | 21 +++++++++++++++++++++
> drivers/rpmsg/rpmsg_internal.h | 2 ++
> include/linux/rpmsg.h | 15 +++++++++++++++
> 3 files changed, 38 insertions(+)
>
> diff --git a/drivers/rpmsg/rpmsg_core.c b/drivers/rpmsg/rpmsg_core.c
> index 5039df7..32b550c 100644
> --- a/drivers/rpmsg/rpmsg_core.c
> +++ b/drivers/rpmsg/rpmsg_core.c
> @@ -331,6 +331,25 @@ int rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst,
> EXPORT_SYMBOL(rpmsg_trysend_offchannel);
>
> /**
> + * rpmsg_set_flow_control() - request remote to pause/resume transmission
> + * @ept: the rpmsg endpoint
> + * @pause: pause transmission
> + * @dst: destination address of the endpoint
> + *
> + * Return: 0 on success and an appropriate error value on failure.
> + */
> +int rpmsg_set_flow_control(struct rpmsg_endpoint *ept, bool pause, u32 dst)
> +{
> + if (WARN_ON(!ept))
> + return -EINVAL;
> + if (!ept->ops->set_flow_control)
> + return -EOPNOTSUPP;
> +
> + return ept->ops->set_flow_control(ept, pause, dst);
> +}
> +EXPORT_SYMBOL_GPL(rpmsg_set_flow_control);
> +
> +/**
> * rpmsg_get_mtu() - get maximum transmission buffer size for sending message.
> * @ept: the rpmsg endpoint
> *
> @@ -539,6 +558,8 @@ static int rpmsg_dev_probe(struct device *dev)
>
> rpdev->ept = ept;
> rpdev->src = ept->addr;
> +
> + ept->flow_cb = rpdrv->flowcontrol;
> }
>
> err = rpdrv->probe(rpdev);
> diff --git a/drivers/rpmsg/rpmsg_internal.h b/drivers/rpmsg/rpmsg_internal.h
> index 39b646d..b6efd3e 100644
> --- a/drivers/rpmsg/rpmsg_internal.h
> +++ b/drivers/rpmsg/rpmsg_internal.h
> @@ -55,6 +55,7 @@ struct rpmsg_device_ops {
> * @trysendto: see @rpmsg_trysendto(), optional
> * @trysend_offchannel: see @rpmsg_trysend_offchannel(), optional
> * @poll: see @rpmsg_poll(), optional
> + * @set_flow_control: see @rpmsg_set_flow_control(), optional
> * @get_mtu: see @rpmsg_get_mtu(), optional
> *
> * Indirection table for the operations that a rpmsg backend should implement.
> @@ -75,6 +76,7 @@ struct rpmsg_endpoint_ops {
> void *data, int len);
> __poll_t (*poll)(struct rpmsg_endpoint *ept, struct file *filp,
> poll_table *wait);
> + int (*set_flow_control)(struct rpmsg_endpoint *ept, bool enable, u32 dst);
s/bool enable/bool pause/
> ssize_t (*get_mtu)(struct rpmsg_endpoint *ept);
> };
>
> diff --git a/include/linux/rpmsg.h b/include/linux/rpmsg.h
> index 523c98b..edd7c5f 100644
> --- a/include/linux/rpmsg.h
> +++ b/include/linux/rpmsg.h
> @@ -64,12 +64,14 @@ struct rpmsg_device {
> };
>
> typedef int (*rpmsg_rx_cb_t)(struct rpmsg_device *, void *, int, void *, u32);
> +typedef int (*rpmsg_flowcontrol_cb_t)(struct rpmsg_device *, void *, bool);
>
> /**
> * struct rpmsg_endpoint - binds a local rpmsg address to its user
> * @rpdev: rpmsg channel device
> * @refcount: when this drops to zero, the ept is deallocated
> * @cb: rx callback handler
> + * @flow_cb: remote flow control callback handler
> * @cb_lock: must be taken before accessing/changing @cb
> * @addr: local rpmsg address
> * @priv: private data for the driver's use
> @@ -92,6 +94,7 @@ struct rpmsg_endpoint {
> struct rpmsg_device *rpdev;
> struct kref refcount;
> rpmsg_rx_cb_t cb;
> + rpmsg_flowcontrol_cb_t flow_cb;
> struct mutex cb_lock;
> u32 addr;
> void *priv;
> @@ -106,6 +109,7 @@ struct rpmsg_endpoint {
> * @probe: invoked when a matching rpmsg channel (i.e. device) is found
> * @remove: invoked when the rpmsg channel is removed
> * @callback: invoked when an inbound message is received on the channel
> + * @flowcontrol: invoked when remote side flow control status/request is received
> */
> struct rpmsg_driver {
> struct device_driver drv;
> @@ -113,6 +117,7 @@ struct rpmsg_driver {
> int (*probe)(struct rpmsg_device *dev);
> void (*remove)(struct rpmsg_device *dev);
> int (*callback)(struct rpmsg_device *, void *, int, void *, u32);
> + int (*flowcontrol)(struct rpmsg_device *, void *, bool);
> };
>
> static inline u16 rpmsg16_to_cpu(struct rpmsg_device *rpdev, __rpmsg16 val)
> @@ -192,6 +197,8 @@ __poll_t rpmsg_poll(struct rpmsg_endpoint *ept, struct file *filp,
>
> ssize_t rpmsg_get_mtu(struct rpmsg_endpoint *ept);
>
> +int rpmsg_set_flow_control(struct rpmsg_endpoint *ept, bool enable, u32 dst);
same here
> +
> #else
>
> static inline int rpmsg_register_device_override(struct rpmsg_device *rpdev,
> @@ -316,6 +323,14 @@ static inline ssize_t rpmsg_get_mtu(struct rpmsg_endpoint *ept)
> return -ENXIO;
> }
>
> +static inline int rpmsg_set_flow_control(struct rpmsg_endpoint *ept, bool enable, u32 dst)
and here
Regards
Arnaud
> +{
> + /* This shouldn't be possible */
> + WARN_ON(1);
> +
> + return -ENXIO;
> +}
> +
> #endif /* IS_ENABLED(CONFIG_RPMSG) */
>
> /* use a macro to avoid include chaining to get THIS_MODULE */
On Fri, Jun 23, 2023 at 11:11:03AM +0200, Arnaud POULIQUEN wrote:
> On 6/21/23 17:34, Sarannya S wrote:
[..]
> > diff --git a/drivers/rpmsg/rpmsg_char.c b/drivers/rpmsg/rpmsg_char.c
[..]
> > + switch (cmd) {
> > + case RPMSG_GET_OUTGOING_FLOWCONTROL:
> > + eptdev->remote_flow_updated = false;
> > + ret = put_user(eptdev->remote_flow_restricted, (int __user *)arg);
> > + break;
> > + case RPMSG_SET_INCOMING_FLOWCONTROL:
> > + set = !!arg;
> > + ret = rpmsg_set_flow_control(eptdev->ept, set, eptdev->chinfo.dst);
> > + break;
> > + case RPMSG_DESTROY_EPT_IOCTL:
> > + /* Don't allow to destroy a default endpoint. */
> > + if (eptdev->default_ept) {
> > + ret = -EINVAL;
> > + break;
> > + }
> > + ret = rpmsg_chrdev_eptdev_destroy(&eptdev->dev, NULL);
> > + break;
> > + default:
> > + ret = -EINVAL;
> > + }
> >
> > - return rpmsg_chrdev_eptdev_destroy(&eptdev->dev, NULL);
> > + return ret;
> > }
> >
> > static const struct file_operations rpmsg_eptdev_fops = {
> > diff --git a/include/uapi/linux/rpmsg.h b/include/uapi/linux/rpmsg.h
> > index 1637e68..b0a6c17 100644
> > --- a/include/uapi/linux/rpmsg.h
> > +++ b/include/uapi/linux/rpmsg.h
> > @@ -43,4 +43,14 @@ struct rpmsg_endpoint_info {
> > */
> > #define RPMSG_RELEASE_DEV_IOCTL _IOW(0xb5, 0x4, struct rpmsg_endpoint_info)
> >
> > +/**
> > + * Set the flow control for the remote rpmsg char device.
We improved the wording elsewhere in the patch, to make the description
of what the interface controls/exposes. This would benefit from the same
attention.
And this says "Set" while the ioctl says "GET".
> > + */
> > +#define RPMSG_GET_OUTGOING_FLOWCONTROL _IOW(0xb5, 0x5, struct rpmsg_endpoint_info)
> > +
> > +/**
> > + * Set the flow control for the local rpmsg char device.
> > + */
> > +#define RPMSG_SET_INCOMING_FLOWCONTROL _IOW(0xb5, 0x6, struct rpmsg_endpoint_info)
>
>
> Perhaps I missed something, but you use "rpmsg_endpoint_info" as argument.
> In rpmsg_eptdev_ioctl the argument is treated as a boolean.
> Seems to me that something is wrong here.
>
This is indeed an int in the implementation above.
Regards,
Bjorn
> regards,
> Arnaud
>
> > +
> > #endif