2023-07-06 21:49:42

by Sarannya S

[permalink] [raw]
Subject: [PATCH V9 0/3] rpmsg signaling/flowcontrol patches

From: Sarannya S <[email protected]>

Changes from V8:
* Updated the argument for RPMSG_SET_INCOMING_FLOWCONTROL to int.
* Return -EINVAL if arg > 1 in RPMSG_SET_INCOMING_FLOWCONTROL.

Key changes from earlier revisions:
* Added two new RPMSG IOCTLs for rpmsg_char- RPMSG_GET_SIGNAL_IOCTRL and RPMSG_SET_SIGNAL_IOCTRL, to set/get the flow.
* Updated the cmd name 'RPM_CMD_SIGNALS' to 'GLINK_CMD_SIGNALS'.
* Return EOPNOTSUPP error in rpmsg_set_flow_control(), if the backend does not support flow control ops.
* For rpmsg_set_flow_control, change "EXPORT_SYMBOL" to "EXPORT_SYMBOL_GPL".
* Change return type of qcom_glink_handle_signals() from int to void.
* Added destination address of the endpoint as parameter in rpmsg_set_flow_control.
* Changed 'remote_flow' to bool type, and updated it's evaluation.
* Updated evaluation of 'set' in rpmsg_char as 'set = !!arg'.

Chris Lew (2):
rpmsg: glink: Add support to handle signals command
rpmsg: char: Add RPMSG GET/SET FLOWCONTROL IOCTL support

Deepak Kumar Singh (1):
rpmsg: core: Add signal API support

drivers/rpmsg/qcom_glink_native.c | 56 +++++++++++++++++++++++++++++++++++++++
drivers/rpmsg/rpmsg_char.c | 54 ++++++++++++++++++++++++++++++++-----
drivers/rpmsg/rpmsg_core.c | 21 +++++++++++++++
drivers/rpmsg/rpmsg_internal.h | 2 ++
include/linux/rpmsg.h | 15 +++++++++++
include/uapi/linux/rpmsg.h | 10 +++++++
6 files changed, 152 insertions(+), 6 deletions(-)

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project



2023-07-06 21:58:58

by Sarannya S

[permalink] [raw]
Subject: [PATCH V9 3/3] rpmsg: char: Add RPMSG GET/SET FLOWCONTROL IOCTL support

From: Chris Lew <[email protected]>

Add RPMSG_GET_OUTGOING_FLOWCONTROL and RPMSG_SET_INCOMING_FLOWCONTROL
IOCTL support for rpmsg char device nodes to get/set the low level
transport signals.

Signed-off-by: Chris Lew <[email protected]>
Signed-off-by: Deepak Kumar Singh <[email protected]>
Signed-off-by: Sarannya S <[email protected]>
---
drivers/rpmsg/rpmsg_char.c | 54 ++++++++++++++++++++++++++++++++++++++++------
include/uapi/linux/rpmsg.h | 10 +++++++++
2 files changed, 58 insertions(+), 6 deletions(-)

diff --git a/drivers/rpmsg/rpmsg_char.c b/drivers/rpmsg/rpmsg_char.c
index a271fce..09833ad 100644
--- a/drivers/rpmsg/rpmsg_char.c
+++ b/drivers/rpmsg/rpmsg_char.c
@@ -52,6 +52,8 @@ static DEFINE_IDA(rpmsg_minor_ida);
* @readq: wait object for incoming queue
* @default_ept: set to channel default endpoint if the default endpoint should be re-used
* on device open to prevent endpoint address update.
+ * remote_flow_restricted: to indicate if the remote has requested for flow to be limited
+ * remote_flow_updated: to indicate if the flow control has been requested
*/
struct rpmsg_eptdev {
struct device dev;
@@ -68,6 +70,8 @@ struct rpmsg_eptdev {
struct sk_buff_head queue;
wait_queue_head_t readq;

+ bool remote_flow_restricted;
+ bool remote_flow_updated;
};

int rpmsg_chrdev_eptdev_destroy(struct device *dev, void *data)
@@ -116,6 +120,18 @@ static int rpmsg_ept_cb(struct rpmsg_device *rpdev, void *buf, int len,
return 0;
}

+static int rpmsg_ept_flow_cb(struct rpmsg_device *rpdev, void *priv, bool enable)
+{
+ struct rpmsg_eptdev *eptdev = priv;
+
+ eptdev->remote_flow_restricted = enable;
+ eptdev->remote_flow_updated = true;
+
+ wake_up_interruptible(&eptdev->readq);
+
+ return 0;
+}
+
static int rpmsg_eptdev_open(struct inode *inode, struct file *filp)
{
struct rpmsg_eptdev *eptdev = cdev_to_eptdev(inode->i_cdev);
@@ -152,6 +168,7 @@ static int rpmsg_eptdev_open(struct inode *inode, struct file *filp)
return -EINVAL;
}

+ ept->flow_cb = rpmsg_ept_flow_cb;
eptdev->ept = ept;
filp->private_data = eptdev;
mutex_unlock(&eptdev->ept_lock);
@@ -172,6 +189,7 @@ static int rpmsg_eptdev_release(struct inode *inode, struct file *filp)
eptdev->ept = NULL;
}
mutex_unlock(&eptdev->ept_lock);
+ eptdev->remote_flow_updated = false;

/* Discard all SKBs */
skb_queue_purge(&eptdev->queue);
@@ -285,6 +303,9 @@ static __poll_t rpmsg_eptdev_poll(struct file *filp, poll_table *wait)
if (!skb_queue_empty(&eptdev->queue))
mask |= EPOLLIN | EPOLLRDNORM;

+ if (eptdev->remote_flow_updated)
+ mask |= EPOLLPRI;
+
mutex_lock(&eptdev->ept_lock);
mask |= rpmsg_poll(eptdev->ept, filp, wait);
mutex_unlock(&eptdev->ept_lock);
@@ -297,14 +318,35 @@ static long rpmsg_eptdev_ioctl(struct file *fp, unsigned int cmd,
{
struct rpmsg_eptdev *eptdev = fp->private_data;

- if (cmd != RPMSG_DESTROY_EPT_IOCTL)
- return -EINVAL;
+ bool set;
+ int ret;

- /* Don't allow to destroy a default endpoint. */
- if (eptdev->default_ept)
- return -EINVAL;
+ switch (cmd) {
+ case RPMSG_GET_OUTGOING_FLOWCONTROL:
+ eptdev->remote_flow_updated = false;
+ ret = put_user(eptdev->remote_flow_restricted, (int __user *)arg);
+ break;
+ case RPMSG_SET_INCOMING_FLOWCONTROL:
+ if (arg > 1) {
+ ret = -EINVAL;
+ break;
+ }
+ set = !!arg;
+ ret = rpmsg_set_flow_control(eptdev->ept, set, eptdev->chinfo.dst);
+ break;
+ case RPMSG_DESTROY_EPT_IOCTL:
+ /* Don't allow to destroy a default endpoint. */
+ if (eptdev->default_ept) {
+ ret = -EINVAL;
+ break;
+ }
+ ret = rpmsg_chrdev_eptdev_destroy(&eptdev->dev, NULL);
+ break;
+ default:
+ ret = -EINVAL;
+ }

- return rpmsg_chrdev_eptdev_destroy(&eptdev->dev, NULL);
+ return ret;
}

static const struct file_operations rpmsg_eptdev_fops = {
diff --git a/include/uapi/linux/rpmsg.h b/include/uapi/linux/rpmsg.h
index 1637e68..f0c8da2 100644
--- a/include/uapi/linux/rpmsg.h
+++ b/include/uapi/linux/rpmsg.h
@@ -43,4 +43,14 @@ struct rpmsg_endpoint_info {
*/
#define RPMSG_RELEASE_DEV_IOCTL _IOW(0xb5, 0x4, struct rpmsg_endpoint_info)

+/**
+ * Get the flow control state of the remote rpmsg char device.
+ */
+#define RPMSG_GET_OUTGOING_FLOWCONTROL _IOR(0xb5, 0x5, int)
+
+/**
+ * Set the flow control state of the local rpmsg char device.
+ */
+#define RPMSG_SET_INCOMING_FLOWCONTROL _IOR(0xb5, 0x6, int)
+
#endif
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


2023-07-10 13:09:40

by Arnaud Pouliquen

[permalink] [raw]
Subject: Re: [PATCH V9 3/3] rpmsg: char: Add RPMSG GET/SET FLOWCONTROL IOCTL support



On 7/6/23 23:41, Sarannya S wrote:
> From: Chris Lew <[email protected]>
>
> Add RPMSG_GET_OUTGOING_FLOWCONTROL and RPMSG_SET_INCOMING_FLOWCONTROL
> IOCTL support for rpmsg char device nodes to get/set the low level
> transport signals.
>
> Signed-off-by: Chris Lew <[email protected]>
> Signed-off-by: Deepak Kumar Singh <[email protected]>
> Signed-off-by: Sarannya S <[email protected]>
> ---
> drivers/rpmsg/rpmsg_char.c | 54 ++++++++++++++++++++++++++++++++++++++++------
> include/uapi/linux/rpmsg.h | 10 +++++++++
> 2 files changed, 58 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/rpmsg/rpmsg_char.c b/drivers/rpmsg/rpmsg_char.c
> index a271fce..09833ad 100644
> --- a/drivers/rpmsg/rpmsg_char.c
> +++ b/drivers/rpmsg/rpmsg_char.c
> @@ -52,6 +52,8 @@ static DEFINE_IDA(rpmsg_minor_ida);
> * @readq: wait object for incoming queue
> * @default_ept: set to channel default endpoint if the default endpoint should be re-used
> * on device open to prevent endpoint address update.
> + * remote_flow_restricted: to indicate if the remote has requested for flow to be limited
> + * remote_flow_updated: to indicate if the flow control has been requested
> */
> struct rpmsg_eptdev {
> struct device dev;
> @@ -68,6 +70,8 @@ struct rpmsg_eptdev {
> struct sk_buff_head queue;
> wait_queue_head_t readq;
>
> + bool remote_flow_restricted;
> + bool remote_flow_updated;
> };
>
> int rpmsg_chrdev_eptdev_destroy(struct device *dev, void *data)
> @@ -116,6 +120,18 @@ static int rpmsg_ept_cb(struct rpmsg_device *rpdev, void *buf, int len,
> return 0;
> }
>
> +static int rpmsg_ept_flow_cb(struct rpmsg_device *rpdev, void *priv, bool enable)
> +{
> + struct rpmsg_eptdev *eptdev = priv;
> +
> + eptdev->remote_flow_restricted = enable;
> + eptdev->remote_flow_updated = true;
> +
> + wake_up_interruptible(&eptdev->readq);
> +
> + return 0;
> +}
> +
> static int rpmsg_eptdev_open(struct inode *inode, struct file *filp)
> {
> struct rpmsg_eptdev *eptdev = cdev_to_eptdev(inode->i_cdev);
> @@ -152,6 +168,7 @@ static int rpmsg_eptdev_open(struct inode *inode, struct file *filp)
> return -EINVAL;
> }
>
> + ept->flow_cb = rpmsg_ept_flow_cb;
> eptdev->ept = ept;
> filp->private_data = eptdev;
> mutex_unlock(&eptdev->ept_lock);
> @@ -172,6 +189,7 @@ static int rpmsg_eptdev_release(struct inode *inode, struct file *filp)
> eptdev->ept = NULL;
> }
> mutex_unlock(&eptdev->ept_lock);
> + eptdev->remote_flow_updated = false;
>
> /* Discard all SKBs */
> skb_queue_purge(&eptdev->queue);
> @@ -285,6 +303,9 @@ static __poll_t rpmsg_eptdev_poll(struct file *filp, poll_table *wait)
> if (!skb_queue_empty(&eptdev->queue))
> mask |= EPOLLIN | EPOLLRDNORM;
>
> + if (eptdev->remote_flow_updated)
> + mask |= EPOLLPRI;
> +
> mutex_lock(&eptdev->ept_lock);
> mask |= rpmsg_poll(eptdev->ept, filp, wait);
> mutex_unlock(&eptdev->ept_lock);
> @@ -297,14 +318,35 @@ static long rpmsg_eptdev_ioctl(struct file *fp, unsigned int cmd,
> {
> struct rpmsg_eptdev *eptdev = fp->private_data;
>
> - if (cmd != RPMSG_DESTROY_EPT_IOCTL)
> - return -EINVAL;
> + bool set;
> + int ret;
>
> - /* Don't allow to destroy a default endpoint. */
> - if (eptdev->default_ept)
> - return -EINVAL;
> + switch (cmd) {
> + case RPMSG_GET_OUTGOING_FLOWCONTROL:
> + eptdev->remote_flow_updated = false;
> + ret = put_user(eptdev->remote_flow_restricted, (int __user *)arg);
> + break;
> + case RPMSG_SET_INCOMING_FLOWCONTROL:
> + if (arg > 1) {
> + ret = -EINVAL;
> + break;
> + }
> + set = !!arg;
> + ret = rpmsg_set_flow_control(eptdev->ept, set, eptdev->chinfo.dst);
> + break;
> + case RPMSG_DESTROY_EPT_IOCTL:
> + /* Don't allow to destroy a default endpoint. */
> + if (eptdev->default_ept) {
> + ret = -EINVAL;
> + break;
> + }
> + ret = rpmsg_chrdev_eptdev_destroy(&eptdev->dev, NULL);
> + break;
> + default:
> + ret = -EINVAL;
> + }
>
> - return rpmsg_chrdev_eptdev_destroy(&eptdev->dev, NULL);
> + return ret;
> }
>
> static const struct file_operations rpmsg_eptdev_fops = {
> diff --git a/include/uapi/linux/rpmsg.h b/include/uapi/linux/rpmsg.h
> index 1637e68..f0c8da2 100644
> --- a/include/uapi/linux/rpmsg.h
> +++ b/include/uapi/linux/rpmsg.h
> @@ -43,4 +43,14 @@ struct rpmsg_endpoint_info {
> */
> #define RPMSG_RELEASE_DEV_IOCTL _IOW(0xb5, 0x4, struct rpmsg_endpoint_info)
>
> +/**
> + * Get the flow control state of the remote rpmsg char device.
> + */
> +#define RPMSG_GET_OUTGOING_FLOWCONTROL _IOR(0xb5, 0x5, int)
> +
> +/**
> + * Set the flow control state of the local rpmsg char device.
> + */
> +#define RPMSG_SET_INCOMING_FLOWCONTROL _IOR(0xb5, 0x6, int)
> +

Seems that it is not the use to document the parameters for IOCTL
but I wonder if documenting the use of the RPMSG_GET_OUTGOING_FLOWCONTROL
and RPMSG_SET_INCOMING_FLOWCONTROL parameter could help users to implement
the IOCTL...

For the series
Acked-by: Arnaud Pouliquen <[email protected]>

Thanks,
Arnaud

> #endif

2023-07-15 19:53:07

by Bjorn Andersson

[permalink] [raw]
Subject: Re: [PATCH V9 0/3] rpmsg signaling/flowcontrol patches


On Fri, 07 Jul 2023 03:11:35 +0530, Sarannya S wrote:
> From: Sarannya S <[email protected]>
>
> Changes from V8:
> * Updated the argument for RPMSG_SET_INCOMING_FLOWCONTROL to int.
> * Return -EINVAL if arg > 1 in RPMSG_SET_INCOMING_FLOWCONTROL.
>
> Key changes from earlier revisions:
> * Added two new RPMSG IOCTLs for rpmsg_char- RPMSG_GET_SIGNAL_IOCTRL and RPMSG_SET_SIGNAL_IOCTRL, to set/get the flow.
> * Updated the cmd name 'RPM_CMD_SIGNALS' to 'GLINK_CMD_SIGNALS'.
> * Return EOPNOTSUPP error in rpmsg_set_flow_control(), if the backend does not support flow control ops.
> * For rpmsg_set_flow_control, change "EXPORT_SYMBOL" to "EXPORT_SYMBOL_GPL".
> * Change return type of qcom_glink_handle_signals() from int to void.
> * Added destination address of the endpoint as parameter in rpmsg_set_flow_control.
> * Changed 'remote_flow' to bool type, and updated it's evaluation.
> * Updated evaluation of 'set' in rpmsg_char as 'set = !!arg'.
>
> [...]

Applied, thanks!

[1/3] rpmsg: core: Add signal API support
commit: 8ce49c2a2aa53afde9a20a8ce02b069d3b262af0
[2/3] rpmsg: glink: Add support to handle signals command
commit: a2b73aa512a4a90dda7dd5bb38b26b4f1381adbb
[3/3] rpmsg: char: Add RPMSG GET/SET FLOWCONTROL IOCTL support
commit: 5550201c0fe26a76c53983bd36a58d4c4395ec22

Best regards,
--
Bjorn Andersson <[email protected]>