2023-07-11 06:00:58

by Rohit Agarwal

Subject: [PATCH v2 0/2] Add regulators support for PMX75

Hi,

Changes in v2:
- Addressed Krzysztof to update the if:then: in bindings patch.
- Breaking the original series [1] into smaller series.

This series adds regulators supports in PMX75 found on
SDX75 platform.

[1] https://lore.kernel.org/all/[email protected]/

Thanks,
Rohit.

Rohit Agarwal (2):
dt-bindings: regulator: Add PMX75 compatible
regulator: qcom-rpmh: Add regulators for PMX75

.../bindings/regulator/qcom,rpmh-regulator.yaml | 22 ++++++++++++-
drivers/regulator/qcom-rpmh-regulator.c | 38 ++++++++++++++++++++++
2 files changed, 59 insertions(+), 1 deletion(-)

--
2.7.4

2023-07-11 06:04:48

by Rohit Agarwal

Subject: [PATCH v2 2/2] regulator: qcom-rpmh: Add regulators for PMX75

Add support from RPMH regulators found in PMX75 for SDX75 platform.

Signed-off-by: Rohit Agarwal <[email protected]>
---
drivers/regulator/qcom-rpmh-regulator.c | 38 +++++++++++++++++++++++++++++++++
1 file changed, 38 insertions(+)

diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index f3b280a..0881e91 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -1273,6 +1273,40 @@ static const struct rpmh_vreg_init_data pmx65_vreg_data[] = {
{}
};

+static const struct rpmh_vreg_init_data pmx75_vreg_data[] = {
+ RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps525_lv, "vdd-s1"),
+ RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps525_lv, "vdd-s2"),
+ RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps525_lv, "vdd-s3"),
+ RPMH_VREG("smps4", "smp%s4", &pmic5_ftsmps525_mv, "vdd-s4"),
+ RPMH_VREG("smps5", "smp%s5", &pmic5_ftsmps525_lv, "vdd-s5"),
+ RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps525_lv, "vdd-s6"),
+ RPMH_VREG("smps7", "smp%s7", &pmic5_ftsmps525_lv, "vdd-s7"),
+ RPMH_VREG("smps8", "smp%s8", &pmic5_ftsmps525_lv, "vdd-s8"),
+ RPMH_VREG("smps9", "smp%s9", &pmic5_ftsmps525_lv, "vdd-s9"),
+ RPMH_VREG("smps10", "smp%s10", &pmic5_ftsmps525_lv, "vdd-s10"),
+ RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo515, "vdd-l1"),
+ RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo515, "vdd-l2-18"),
+ RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo515, "vdd-l3"),
+ RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo515, "vdd-l4-l16"),
+ RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo_lv, "vdd-l5-l6"),
+ RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo_lv, "vdd-l5-l6"),
+ RPMH_VREG("ldo7", "ldo%s7", &pmic5_nldo515, "vdd-l7"),
+ RPMH_VREG("ldo8", "ldo%s8", &pmic5_nldo515, "vdd-l8-l9"),
+ RPMH_VREG("ldo9", "ldo%s9", &pmic5_nldo515, "vdd-l8-l9"),
+ RPMH_VREG("ldo10", "ldo%s10", &pmic5_pldo, "vdd-l10"),
+ RPMH_VREG("ldo11", "ldo%s11", &pmic5_pldo, "vdd-l11-l13"),
+ RPMH_VREG("ldo12", "ldo%s12", &pmic5_nldo515, "vdd-l12"),
+ RPMH_VREG("ldo13", "ldo%s13", &pmic5_pldo, "vdd-l11-l13"),
+ RPMH_VREG("ldo14", "ldo%s14", &pmic5_nldo515, "vdd-l14"),
+ RPMH_VREG("ldo15", "ldo%s15", &pmic5_nldo515, "vdd-l15"),
+ RPMH_VREG("ldo16", "ldo%s16", &pmic5_nldo515, "vdd-l4-l16"),
+ RPMH_VREG("ldo17", "ldo%s17", &pmic5_nldo515, "vdd-l17"),
+ /* ldo18 not configured */
+ RPMH_VREG("ldo19", "ldo%s19", &pmic5_nldo515, "vdd-l19"),
+ RPMH_VREG("ldo20", "ldo%s20", &pmic5_nldo515, "vdd-l20-l21"),
+ RPMH_VREG("ldo21", "ldo%s21", &pmic5_nldo515, "vdd-l20-l21"),
+};
+
static const struct rpmh_vreg_init_data pm7325_vreg_data[] = {
RPMH_VREG("smps1", "smp%s1", &pmic5_hfsmps510, "vdd-s1"),
RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps520, "vdd-s2"),
@@ -1495,6 +1529,10 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
.data = pmx65_vreg_data,
},
{
+ .compatible = "qcom,pmx75-rpmh-regulators",
+ .data = pmx75_vreg_data,
+ },
+ {
.compatible = "qcom,pm7325-rpmh-regulators",
.data = pm7325_vreg_data,
},
--
2.7.4