From: alinayu <[email protected]>
This patch series adds support for RTQ2208 SubPMIC regulators.
The RTQ2208 is a multi-phase, programmable power management IC that
integrate with dual multi-configurable, synchronous buck converters
and two ldos. The bucks features wide output voltage range from 0.4V to 2.05V
and the capability to configure the corresponding power stages.
Thank you,
Alina yu
---
Change in v4:
- In Patch 1/2:
- Modify filename to "richtek,rtq2208"
- Add more desciptions for "regulator-allowed-modes"
Change in v3:
- In Patch 1/2:
- Fix some typos
- Modify the descriptions for "richtek,mtp-sel"
- Modify the node name to lowercase and remove underscore
- Remove '|' from description
- Remove "regulator-compatible" from property
- Remove "regulator-state-mem" from pattern
- Modify node name to generic one
---
alinayu (2):
regulator: dt-bindings: rtq2208: Add Richtek RTQ2208 SubPMIC
regulator: rtq2208: Add Richtek RTQ2208 SubPMIC driver
.../bindings/regulator/richtek,rtq2208.yaml | 208 ++++++++
drivers/regulator/Kconfig | 11 +
drivers/regulator/Makefile | 1 +
drivers/regulator/rtq2208-regulator.c | 538 +++++++++++++++++++++
4 files changed, 758 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml
create mode 100644 drivers/regulator/rtq2208-regulator.c
--
2.7.4