Conversion from ftgmac100.txt to yaml format version.
Signed-off-by: Ivan Mikhaylov <[email protected]>
---
.../bindings/net/faraday,ftgmac100.yaml | 102 ++++++++++++++++++
.../devicetree/bindings/net/ftgmac100.txt | 67 ------------
2 files changed, 102 insertions(+), 67 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml
delete mode 100644 Documentation/devicetree/bindings/net/ftgmac100.txt
diff --git a/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml b/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml
new file mode 100644
index 000000000000..f1e72290ed94
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday Technology FTGMAC100 gigabit ethernet controller
+
+allOf:
+ - $ref: ethernet-controller.yaml#
+
+maintainers:
+ - Po-Yu Chuang <[email protected]>
+
+properties:
+ compatible:
+ oneOf:
+ - const: faraday,ftgmac100
+ - items:
+ - enum:
+ - aspeed,ast2400-mac
+ - aspeed,ast2500-mac
+ - aspeed,ast2600-mac
+ - const: faraday,ftgmac100
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ description:
+ The MAC IP clock and optionally a RMII RCLK gate for the AST2500/AST2600.
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ items:
+ - enum:
+ - MACCLK
+ - RCLK
+ minItems: 1
+
+ phy-mode:
+ enum:
+ - rgmii
+ - rmii
+
+ phy-handle: true
+
+ use-ncsi:
+ description:
+ Use the NC-SI stack instead of an MDIO PHY. Currently assumes
+ rmii (100bT) but kept as a separate property in case NC-SI grows support
+ for a gigabit link.
+ type: boolean
+
+ no-hw-checksum:
+ description:
+ Used to disable HW checksum support. Here for backward
+ compatibility as the driver now should have correct defaults based on
+ the SoC.
+ type: boolean
+
+ mdio:
+ $ref: /schemas/net/mdio.yaml#
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ mac0: ethernet@1e660000 {
+ compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
+ reg = <0x1e660000 0x180>;
+ interrupts = <2>;
+ use-ncsi;
+ };
+
+ mac1: ethernet@1e680000 {
+ compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
+ reg = <0x1e680000 0x180>;
+ interrupts = <2>;
+
+ phy-handle = <&phy>;
+ phy-mode = "rgmii";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/net/ftgmac100.txt b/Documentation/devicetree/bindings/net/ftgmac100.txt
deleted file mode 100644
index 29234021f601..000000000000
--- a/Documentation/devicetree/bindings/net/ftgmac100.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-* Faraday Technology FTGMAC100 gigabit ethernet controller
-
-Required properties:
-- compatible: "faraday,ftgmac100"
-
- Must also contain one of these if used as part of an Aspeed AST2400
- or 2500 family SoC as they have some subtle tweaks to the
- implementation:
-
- - "aspeed,ast2400-mac"
- - "aspeed,ast2500-mac"
- - "aspeed,ast2600-mac"
-
-- reg: Address and length of the register set for the device
-- interrupts: Should contain ethernet controller interrupt
-
-Optional properties:
-- phy-handle: See ethernet.txt file in the same directory.
-- phy-mode: See ethernet.txt file in the same directory. If the property is
- absent, "rgmii" is assumed. Supported values are "rgmii*" and "rmii" for
- aspeed parts. Other (unknown) parts will accept any value.
-- use-ncsi: Use the NC-SI stack instead of an MDIO PHY. Currently assumes
- rmii (100bT) but kept as a separate property in case NC-SI grows support
- for a gigabit link.
-- no-hw-checksum: Used to disable HW checksum support. Here for backward
- compatibility as the driver now should have correct defaults based on
- the SoC.
-- clocks: In accordance with the generic clock bindings. Must describe the MAC
- IP clock, and optionally an RMII RCLK gate for the AST2500/AST2600. The
- required MAC clock must be the first cell.
-- clock-names:
-
- - "MACCLK": The MAC IP clock
- - "RCLK": Clock gate for the RMII RCLK
-
-Optional subnodes:
-- mdio: See mdio.txt file in the same directory.
-
-Example:
-
- mac0: ethernet@1e660000 {
- compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
- reg = <0x1e660000 0x180>;
- interrupts = <2>;
- use-ncsi;
- };
-
-Example with phy-handle:
-
- mac1: ethernet@1e680000 {
- compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
- reg = <0x1e680000 0x180>;
- interrupts = <2>;
-
- phy-handle = <&phy>;
- phy-mode = "rgmii";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- phy: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
- };
- };
--
2.40.1
On Sun, 23 Jul 2023 18:51:07 +0300, Ivan Mikhaylov wrote:
> Conversion from ftgmac100.txt to yaml format version.
>
> Signed-off-by: Ivan Mikhaylov <[email protected]>
> ---
> .../bindings/net/faraday,ftgmac100.yaml | 102 ++++++++++++++++++
> .../devicetree/bindings/net/ftgmac100.txt | 67 ------------
> 2 files changed, 102 insertions(+), 67 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml
> delete mode 100644 Documentation/devicetree/bindings/net/ftgmac100.txt
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml: properties:clock-names: 'oneOf' conditional failed, one must be fixed:
[{'enum': ['MACCLK', 'RCLK']}] is too short
False schema does not allow 1
hint: "minItems" is only needed if less than the "items" list length
from schema $id: http://devicetree.org/meta-schemas/core.yaml#
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.