Update the RPMHPD references with new bindings defined in rpmhpd.h
for Qualcomm SoCs SM8[2345]50.
Signed-off-by: Rohit Agarwal <[email protected]>
---
Changes in v2:
- Removed the unnecessary inclusion of header rpmpd.h.
This patch is dependent on the series that includes the new rpmhpd.h header
https://lore.kernel.org/all/[email protected]/
Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml | 4 ++--
Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml | 4 ++--
Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml | 4 ++--
Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml | 4 ++--
Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml | 4 ++--
Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml | 4 ++--
Documentation/devicetree/bindings/clock/qcom,videocc.yaml | 4 ++--
.../devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml | 4 ++--
.../devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml | 8 ++++----
.../devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml | 4 ++--
.../devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml | 6 +++---
.../devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml | 4 ++--
.../devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml | 8 ++++----
.../devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml | 4 ++--
.../devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml | 8 ++++----
Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml | 4 ++--
Documentation/devicetree/bindings/mmc/sdhci-msm.yaml | 4 ++--
Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml | 6 +++---
18 files changed, 44 insertions(+), 44 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
index d6774db..59cc88a 100644
--- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
@@ -82,7 +82,7 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/clock/qcom,rpmh.h>
- #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
clock-controller@af00000 {
compatible = "qcom,sm8250-dispcc";
reg = <0x0af00000 0x10000>;
@@ -103,7 +103,7 @@ examples:
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
- power-domains = <&rpmhpd SM8250_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
required-opps = <&rpmhpd_opp_low_svs>;
};
...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml
index 23505c8..d723bb1 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml
@@ -51,7 +51,7 @@ unevaluatedProperties: false
examples:
- |
#include <dt-bindings/clock/qcom,rpmh.h>
- #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
clock-controller@abf0000 {
compatible = "qcom,sm8350-videocc";
@@ -59,7 +59,7 @@ examples:
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&rpmhcc RPMH_CXO_CLK_A>,
<&sleep_clk>;
- power-domains = <&rpmhpd SM8350_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
required-opps = <&rpmhpd_opp_low_svs>;
#clock-cells = <1>;
#reset-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
index 87ae741..8178c35 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
@@ -64,7 +64,7 @@ examples:
- |
#include <dt-bindings/clock/qcom,gcc-sm8450.h>
#include <dt-bindings/clock/qcom,rpmh.h>
- #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
clock-controller@ade0000 {
compatible = "qcom,sm8450-camcc";
reg = <0xade0000 0x20000>;
@@ -72,7 +72,7 @@ examples:
<&rpmhcc RPMH_CXO_CLK>,
<&rpmhcc RPMH_CXO_CLK_A>,
<&sleep_clk>;
- power-domains = <&rpmhpd SM8450_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
required-opps = <&rpmhpd_opp_low_svs>;
#clock-cells = <1>;
#reset-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml
index 1dd1f69..2f22310 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml
@@ -76,7 +76,7 @@ examples:
- |
#include <dt-bindings/clock/qcom,gcc-sm8450.h>
#include <dt-bindings/clock/qcom,rpmh.h>
- #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
clock-controller@af00000 {
compatible = "qcom,sm8450-dispcc";
reg = <0x0af00000 0x10000>;
@@ -91,7 +91,7 @@ examples:
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
- power-domains = <&rpmhpd SM8450_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
required-opps = <&rpmhpd_opp_low_svs>;
};
...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
index f1c6dd5..bad8f01 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
@@ -64,13 +64,13 @@ examples:
- |
#include <dt-bindings/clock/qcom,gcc-sm8450.h>
#include <dt-bindings/clock/qcom,rpmh.h>
- #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
videocc: clock-controller@aaf0000 {
compatible = "qcom,sm8450-videocc";
reg = <0x0aaf0000 0x10000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_VIDEO_AHB_CLK>;
- power-domains = <&rpmhpd SM8450_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
required-opps = <&rpmhpd_opp_low_svs>;
#clock-cells = <1>;
#reset-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml
index ab25f7c..c129f8c 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml
@@ -76,7 +76,7 @@ examples:
- |
#include <dt-bindings/clock/qcom,sm8550-gcc.h>
#include <dt-bindings/clock/qcom,rpmh.h>
- #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
clock-controller@af00000 {
compatible = "qcom,sm8550-dispcc";
reg = <0x0af00000 0x10000>;
@@ -99,7 +99,7 @@ examples:
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
- power-domains = <&rpmhpd SM8550_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
required-opps = <&rpmhpd_opp_low_svs>;
};
...
diff --git a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
index 2b07146..6de01cf 100644
--- a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
@@ -124,7 +124,7 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/clock/qcom,rpmh.h>
- #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
clock-controller@ab00000 {
compatible = "qcom,sdm845-videocc";
reg = <0x0ab00000 0x10000>;
@@ -133,7 +133,7 @@ examples:
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
- power-domains = <&rpmhpd SM8250_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
required-opps = <&rpmhpd_opp_low_svs>;
};
...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml
index 687c8c1..acd2ed3 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml
@@ -54,7 +54,7 @@ examples:
#include <dt-bindings/clock/qcom,gcc-sm8250.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interconnect/qcom,sm8250.h>
- #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
display-controller@ae01000 {
compatible = "qcom,sm8250-dpu";
@@ -72,7 +72,7 @@ examples:
assigned-clock-rates = <19200000>;
operating-points-v2 = <&mdp_opp_table>;
- power-domains = <&rpmhpd SM8250_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
interrupt-parent = <&mdss>;
interrupts = <0>;
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml
index 368d3db..5cfb9b9 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml
@@ -76,7 +76,7 @@ examples:
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interconnect/qcom,sm8250.h>
- #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
display-subsystem@ae00000 {
compatible = "qcom,sm8250-mdss";
@@ -121,7 +121,7 @@ examples:
assigned-clock-rates = <19200000>;
operating-points-v2 = <&mdp_opp_table>;
- power-domains = <&rpmhpd SM8250_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
interrupt-parent = <&mdss>;
interrupts = <0>;
@@ -196,7 +196,7 @@ examples:
assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
operating-points-v2 = <&dsi_opp_table>;
- power-domains = <&rpmhpd SM8250_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
phys = <&dsi0_phy>;
phy-names = "dsi";
@@ -286,7 +286,7 @@ examples:
assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
operating-points-v2 = <&dsi_opp_table>;
- power-domains = <&rpmhpd SM8250_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
phys = <&dsi1_phy>;
phy-names = "dsi";
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
index 1205003..1a4e035 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
@@ -51,7 +51,7 @@ examples:
#include <dt-bindings/clock/qcom,gcc-sm8350.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interconnect/qcom,sm8350.h>
- #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
display-controller@ae01000 {
compatible = "qcom,sm8350-dpu";
@@ -76,7 +76,7 @@ examples:
assigned-clock-rates = <19200000>;
operating-points-v2 = <&mdp_opp_table>;
- power-domains = <&rpmhpd SM8350_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
interrupt-parent = <&mdss>;
interrupts = <0>;
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
index 79a226e..1056bed 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
@@ -75,7 +75,7 @@ examples:
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interconnect/qcom,sm8350.h>
- #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
display-subsystem@ae00000 {
compatible = "qcom,sm8350-mdss";
@@ -128,7 +128,7 @@ examples:
assigned-clock-rates = <19200000>;
operating-points-v2 = <&mdp_opp_table>;
- power-domains = <&rpmhpd SM8350_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
interrupt-parent = <&mdss>;
interrupts = <0>;
@@ -197,7 +197,7 @@ examples:
<&mdss_dsi0_phy 1>;
operating-points-v2 = <&dsi_opp_table>;
- power-domains = <&rpmhpd SM8350_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
phys = <&mdss_dsi0_phy>;
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml
index 0d17ece..da3fd66 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml
@@ -58,7 +58,7 @@ examples:
#include <dt-bindings/clock/qcom,gcc-sm8450.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interconnect/qcom,sm8450.h>
- #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
display-controller@ae01000 {
compatible = "qcom,sm8450-dpu";
@@ -83,7 +83,7 @@ examples:
assigned-clock-rates = <19200000>;
operating-points-v2 = <&mdp_opp_table>;
- power-domains = <&rpmhpd SM8450_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
interrupt-parent = <&mdss>;
interrupts = <0>;
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
index f26eb56..6dd21af 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
@@ -68,7 +68,7 @@ examples:
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interconnect/qcom,sm8450.h>
- #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
display-subsystem@ae00000 {
compatible = "qcom,sm8450-mdss";
@@ -122,7 +122,7 @@ examples:
assigned-clock-rates = <19200000>;
operating-points-v2 = <&mdp_opp_table>;
- power-domains = <&rpmhpd SM8450_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
interrupt-parent = <&mdss>;
interrupts = <0>;
@@ -202,7 +202,7 @@ examples:
assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
operating-points-v2 = <&dsi_opp_table>;
- power-domains = <&rpmhpd SM8450_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
phys = <&dsi0_phy>;
phy-names = "dsi";
@@ -297,7 +297,7 @@ examples:
assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
operating-points-v2 = <&dsi_opp_table>;
- power-domains = <&rpmhpd SM8450_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
phys = <&dsi1_phy>;
phy-names = "dsi";
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml
index ff58a74..99908fb 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml
@@ -57,7 +57,7 @@ examples:
#include <dt-bindings/clock/qcom,sm8550-dispcc.h>
#include <dt-bindings/clock/qcom,sm8550-gcc.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
display-controller@ae01000 {
compatible = "qcom,sm8550-dpu";
@@ -82,7 +82,7 @@ examples:
assigned-clock-rates = <19200000>;
operating-points-v2 = <&mdp_opp_table>;
- power-domains = <&rpmhpd SM8550_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
interrupt-parent = <&mdss>;
interrupts = <0>;
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml
index 887be33..a464312 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml
@@ -68,7 +68,7 @@ examples:
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
- #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
display-subsystem@ae00000 {
compatible = "qcom,sm8550-mdss";
@@ -122,7 +122,7 @@ examples:
assigned-clock-rates = <19200000>;
operating-points-v2 = <&mdp_opp_table>;
- power-domains = <&rpmhpd SM8550_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
interrupt-parent = <&mdss>;
interrupts = <0>;
@@ -197,7 +197,7 @@ examples:
assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
operating-points-v2 = <&dsi_opp_table>;
- power-domains = <&rpmhpd SM8550_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
phys = <&dsi0_phy>;
phy-names = "dsi";
@@ -286,7 +286,7 @@ examples:
assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
operating-points-v2 = <&dsi_opp_table>;
- power-domains = <&rpmhpd SM8550_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
phys = <&dsi1_phy>;
phy-names = "dsi";
diff --git a/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml
index 7915dcd..f66033a 100644
--- a/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml
@@ -106,7 +106,7 @@ examples:
#include <dt-bindings/clock/qcom,videocc-sm8250.h>
#include <dt-bindings/interconnect/qcom,sm8250.h>
#include <dt-bindings/clock/qcom,gcc-sm8250.h>
- #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
venus: video-codec@aa00000 {
compatible = "qcom,sm8250-venus";
@@ -114,7 +114,7 @@ examples:
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&videocc MVS0C_GDSC>,
<&videocc MVS0_GDSC>,
- <&rpmhpd SM8250_MX>;
+ <&rpmhpd RPMHPD_MX>;
power-domain-names = "venus", "vcodec0", "mx";
clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
index 6da28e6..80141eb 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
@@ -215,7 +215,7 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-sm8250.h>
#include <dt-bindings/clock/qcom,rpmh.h>
- #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
sdhc_2: mmc@8804000 {
compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5";
@@ -232,7 +232,7 @@ examples:
iommus = <&apps_smmu 0x4a0 0x0>;
qcom,dll-config = <0x0007642c>;
qcom,ddr-config = <0x80040868>;
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&sdhc2_opp_table>;
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml
index af24f9a..9a04d19 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml
@@ -139,7 +139,7 @@ examples:
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
- #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
remoteproc@30000000 {
compatible = "qcom,sm8450-adsp-pas";
@@ -160,8 +160,8 @@ examples:
memory-region = <&adsp_mem>;
- power-domains = <&rpmhpd SM8450_LCX>,
- <&rpmhpd SM8450_LMX>;
+ power-domains = <&rpmhpd RPMHPD_LCX>,
+ <&rpmhpd RPMHPD_LMX>;
power-domain-names = "lcx", "lmx";
qcom,qmp = <&aoss_qmp>;
--
2.7.4
On Thu, 27 Jul 2023 18:13:33 +0530, Rohit Agarwal wrote:
> Update the RPMHPD references with new bindings defined in rpmhpd.h
> for Qualcomm SoCs SM8[2345]50.
>
> Signed-off-by: Rohit Agarwal <[email protected]>
> ---
>
> Changes in v2:
> - Removed the unnecessary inclusion of header rpmpd.h.
>
> This patch is dependent on the series that includes the new rpmhpd.h header
> https://lore.kernel.org/all/[email protected]/
>
> Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml | 4 ++--
> Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml | 4 ++--
> Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml | 4 ++--
> Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml | 4 ++--
> Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml | 4 ++--
> Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml | 4 ++--
> Documentation/devicetree/bindings/clock/qcom,videocc.yaml | 4 ++--
> .../devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml | 4 ++--
> .../devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml | 8 ++++----
> .../devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml | 4 ++--
> .../devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml | 6 +++---
> .../devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml | 4 ++--
> .../devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml | 8 ++++----
> .../devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml | 4 ++--
> .../devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml | 8 ++++----
> Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml | 4 ++--
> Documentation/devicetree/bindings/mmc/sdhci-msm.yaml | 4 ++--
> Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml | 6 +++---
> 18 files changed, 44 insertions(+), 44 deletions(-)
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.example.dts:21:18: fatal error: dt-bindings/power/qcom,rpmhpd.h: No such file or directory
21 | #include <dt-bindings/power/qcom,rpmhpd.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[2]: *** [scripts/Makefile.lib:419: Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1500: dt_binding_check] Error 2
make: *** [Makefile:234: __sub-make] Error 2
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
On 7/27/2023 6:46 PM, Rob Herring wrote:
> On Thu, 27 Jul 2023 18:13:33 +0530, Rohit Agarwal wrote:
>> Update the RPMHPD references with new bindings defined in rpmhpd.h
>> for Qualcomm SoCs SM8[2345]50.
>>
>> Signed-off-by: Rohit Agarwal <[email protected]>
>> ---
>>
>> Changes in v2:
>> - Removed the unnecessary inclusion of header rpmpd.h.
>>
>> This patch is dependent on the series that includes the new rpmhpd.h header
>> https://lore.kernel.org/all/[email protected]/
>>
>> Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml | 4 ++--
>> Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml | 4 ++--
>> Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml | 4 ++--
>> Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml | 4 ++--
>> Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml | 4 ++--
>> Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml | 4 ++--
>> Documentation/devicetree/bindings/clock/qcom,videocc.yaml | 4 ++--
>> .../devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml | 4 ++--
>> .../devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml | 8 ++++----
>> .../devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml | 4 ++--
>> .../devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml | 6 +++---
>> .../devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml | 4 ++--
>> .../devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml | 8 ++++----
>> .../devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml | 4 ++--
>> .../devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml | 8 ++++----
>> Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml | 4 ++--
>> Documentation/devicetree/bindings/mmc/sdhci-msm.yaml | 4 ++--
>> Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml | 6 +++---
>> 18 files changed, 44 insertions(+), 44 deletions(-)
>>
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.example.dts:21:18: fatal error: dt-bindings/power/qcom,rpmhpd.h: No such file or directory
> 21 | #include <dt-bindings/power/qcom,rpmhpd.h>
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> compilation terminated.
> make[2]: *** [scripts/Makefile.lib:419: Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.example.dtb] Error 1
> make[2]: *** Waiting for unfinished jobs....
> make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1500: dt_binding_check] Error 2
> make: *** [Makefile:234: __sub-make] Error 2
>
> doc reference errors (make refcheckdocs):
>
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]
>
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
We can ignore this error as the dependency is mentioned in the changelog
that adds
this new header. Also have tested locally with these dependencies in place.
Thanks,
Rohit.
On Thu, 27 Jul 2023 18:13:33 +0530, Rohit Agarwal wrote:
> Update the RPMHPD references with new bindings defined in rpmhpd.h
> for Qualcomm SoCs SM8[2345]50.
>
> Signed-off-by: Rohit Agarwal <[email protected]>
> ---
>
> Changes in v2:
> - Removed the unnecessary inclusion of header rpmpd.h.
>
> This patch is dependent on the series that includes the new rpmhpd.h header
> https://lore.kernel.org/all/[email protected]/
>
> Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml | 4 ++--
> Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml | 4 ++--
> Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml | 4 ++--
> Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml | 4 ++--
> Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml | 4 ++--
> Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml | 4 ++--
> Documentation/devicetree/bindings/clock/qcom,videocc.yaml | 4 ++--
> .../devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml | 4 ++--
> .../devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml | 8 ++++----
> .../devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml | 4 ++--
> .../devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml | 6 +++---
> .../devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml | 4 ++--
> .../devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml | 8 ++++----
> .../devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml | 4 ++--
> .../devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml | 8 ++++----
> Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml | 4 ++--
> Documentation/devicetree/bindings/mmc/sdhci-msm.yaml | 4 ++--
> Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml | 6 +++---
> 18 files changed, 44 insertions(+), 44 deletions(-)
>
Acked-by: Rob Herring <[email protected]>