2023-09-20 10:35:34

by Shengjiu Wang

Subject: [PATCH] ASoC: fsl-asoc-card: use integer type for fll_id and pll_id

As the pll_id and pll_id can be zero (WM8960_SYSCLK_AUTO)
with the commit 2bbc2df46e67 ("ASoC: wm8960: Make automatic the
default clocking mode")

Then the machine driver will skip to call set_sysclk() and set_pll()
for codec, when the sysclk rate is different with what wm8960 read
at probe, the output sound frequency is wrong.

So change the fll_id and pll_id initial value, still keep machine
driver's behavior same as before.

Signed-off-by: Shengjiu Wang <[email protected]>
---
sound/soc/fsl/fsl-asoc-card.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c
index 76b5bfc288fd..bab7d34cf585 100644
--- a/sound/soc/fsl/fsl-asoc-card.c
+++ b/sound/soc/fsl/fsl-asoc-card.c
@@ -52,8 +52,8 @@ struct codec_priv {
unsigned long mclk_freq;
unsigned long free_freq;
u32 mclk_id;
- u32 fll_id;
- u32 pll_id;
+ int fll_id;
+ int pll_id;
};

/**
@@ -206,7 +206,7 @@ static int fsl_asoc_card_hw_params(struct snd_pcm_substream *substream,
}

/* Specific configuration for PLL */
- if (codec_priv->pll_id && codec_priv->fll_id) {
+ if (codec_priv->pll_id >= 0 && codec_priv->fll_id >= 0) {
if (priv->sample_format == SNDRV_PCM_FORMAT_S24_LE)
pll_out = priv->sample_rate * 384;
else
@@ -248,7 +248,7 @@ static int fsl_asoc_card_hw_free(struct snd_pcm_substream *substream)

priv->streams &= ~BIT(substream->stream);

- if (!priv->streams && codec_priv->pll_id && codec_priv->fll_id) {
+ if (!priv->streams && codec_priv->pll_id >= 0 && codec_priv->fll_id >= 0) {
/* Force freq to be free_freq to avoid error message in codec */
ret = snd_soc_dai_set_sysclk(asoc_rtd_to_codec(rtd, 0),
codec_priv->mclk_id,
@@ -621,6 +621,10 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
priv->card.dapm_routes = audio_map;
priv->card.num_dapm_routes = ARRAY_SIZE(audio_map);
priv->card.driver_name = DRIVER_NAME;
+
+ priv->codec_priv.fll_id = -1;
+ priv->codec_priv.pll_id = -1;
+
/* Diversify the card configurations */
if (of_device_is_compatible(np, "fsl,imx-audio-cs42888")) {
codec_dai_name = "cs42888";
--
2.34.1

2023-09-26 12:59:21

by Mark Brown

Subject: Re: [PATCH] ASoC: fsl-asoc-card: use integer type for fll_id and pll_id

On Wed, 20 Sep 2023 17:43:12 +0800, Shengjiu Wang wrote:
> As the pll_id and pll_id can be zero (WM8960_SYSCLK_AUTO)
> with the commit 2bbc2df46e67 ("ASoC: wm8960: Make automatic the
> default clocking mode")
>
> Then the machine driver will skip to call set_sysclk() and set_pll()
> for codec, when the sysclk rate is different with what wm8960 read
> at probe, the output sound frequency is wrong.
>
> [...]

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: fsl-asoc-card: use integer type for fll_id and pll_id
commit: 2b21207afd06714986a3d22442ed4860ba4f9ced

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark