Convert the binding for the Marvell PXA1928 USB and HSIC PHYs from TXT
to DT schema.
Signed-off-by: Duje Mihanović <[email protected]>
---
.../bindings/phy/marvell,pxa1928-hsic-phy.yaml | 37 +++++++++++++++++
.../bindings/phy/marvell,pxa1928-usb-phy.yaml | 46 ++++++++++++++++++++++
.../devicetree/bindings/phy/pxa1928-usb-phy.txt | 18 ---------
3 files changed, 83 insertions(+), 18 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/marvell,pxa1928-hsic-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,pxa1928-hsic-phy.yaml
new file mode 100644
index 000000000000..a477afd11329
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/marvell,pxa1928-hsic-phy.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/marvell,pxa1928-hsic-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell PXA1928 HSIC PHY
+
+maintainers:
+ - [email protected]
+
+properties:
+ $nodename:
+ pattern: '^phy@[a-f0-9]+$'
+
+ compatible:
+ const: "marvell,pxa1928-hsic-phy"
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ '#phy-cells':
+ const: 0
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#phy-cells'
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/phy/marvell,pxa1928-usb-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,pxa1928-usb-phy.yaml
new file mode 100644
index 000000000000..4ae9201767ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/marvell,pxa1928-usb-phy.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/marvell,pxa1928-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell PXA1928 USB PHY
+
+maintainers:
+ - [email protected]
+
+properties:
+ $nodename:
+ pattern: '^phy@[a-f0-9]+$'
+
+ compatible:
+ const: "marvell,pxa1928-usb-phy"
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ '#phy-cells':
+ const: 0
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ phy@7000 {
+ compatible = "marvell,pxa1928-usb-phy";
+ reg = <0x7000 0xe0>;
+ clocks = <&apmu_clocks PXA1928_CLK_USB>;
+ #phy-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt b/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt
deleted file mode 100644
index da94426aa694..000000000000
--- a/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-* Marvell PXA1928 USB and HSIC PHYs
-
-Required properties:
-- compatible: "marvell,pxa1928-usb-phy" or "marvell,pxa1928-hsic-phy"
-- reg: base address and length of the registers
-- clocks - A single clock. From common clock binding.
-- #phys-cells: should be 0. From common phy binding.
-- resets: reference to the reset controller
-
-Example:
-
- usbphy: phy@7000 {
- compatible = "marvell,pxa1928-usb-phy";
- reg = <0x7000 0xe0>;
- clocks = <&apmu_clocks PXA1928_CLK_USB>;
- #phy-cells = <0>;
- };
-
---
base-commit: 6465e260f48790807eef06b583b38ca9789b6072
change-id: 20231001-pxa1928-usb-yaml-809564082241
Best regards,
--
Duje Mihanović <[email protected]>
On Sun, 01 Oct 2023 15:05:43 +0200, Duje Mihanović wrote:
> Convert the binding for the Marvell PXA1928 USB and HSIC PHYs from TXT
> to DT schema.
>
> Signed-off-by: Duje Mihanović <[email protected]>
> ---
> .../bindings/phy/marvell,pxa1928-hsic-phy.yaml | 37 +++++++++++++++++
> .../bindings/phy/marvell,pxa1928-usb-phy.yaml | 46 ++++++++++++++++++++++
> .../devicetree/bindings/phy/pxa1928-usb-phy.txt | 18 ---------
> 3 files changed, 83 insertions(+), 18 deletions(-)
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Error: Documentation/devicetree/bindings/phy/marvell,pxa1928-usb-phy.example.dts:21.34-35 syntax error
FATAL ERROR: Unable to parse input tree
make[2]: *** [scripts/Makefile.lib:419: Documentation/devicetree/bindings/phy/marvell,pxa1928-usb-phy.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1427: dt_binding_check] Error 2
make: *** [Makefile:234: __sub-make] Error 2
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
On Sun, Oct 01, 2023 at 03:05:43PM +0200, Duje Mihanović wrote:
> Convert the binding for the Marvell PXA1928 USB and HSIC PHYs from TXT
> to DT schema.
>
> Signed-off-by: Duje Mihanović <[email protected]>
> ---
> .../bindings/phy/marvell,pxa1928-hsic-phy.yaml | 37 +++++++++++++++++
> .../bindings/phy/marvell,pxa1928-usb-phy.yaml | 46 ++++++++++++++++++++++
> .../devicetree/bindings/phy/pxa1928-usb-phy.txt | 18 ---------
> 3 files changed, 83 insertions(+), 18 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/phy/marvell,pxa1928-hsic-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,pxa1928-hsic-phy.yaml
> new file mode 100644
> index 000000000000..a477afd11329
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/marvell,pxa1928-hsic-phy.yaml
> @@ -0,0 +1,37 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/marvell,pxa1928-hsic-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Marvell PXA1928 HSIC PHY
> +
> +maintainers:
> + - [email protected]
No, should be someone with hardware or familar with it. I added this,
but no longer have h/w or documentation. IMO, it should probably be
removed.
The schemas are the same, so they could just be 1 document.
> +
> +properties:
> + $nodename:
> + pattern: '^phy@[a-f0-9]+$'
> +
> + compatible:
> + const: "marvell,pxa1928-hsic-phy"
Don't need quotes.
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + '#phy-cells':
> + const: 0
> +
> + resets:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - '#phy-cells'
> +
> +additionalProperties: false
> diff --git a/Documentation/devicetree/bindings/phy/marvell,pxa1928-usb-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,pxa1928-usb-phy.yaml
> new file mode 100644
> index 000000000000..4ae9201767ed
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/marvell,pxa1928-usb-phy.yaml
> @@ -0,0 +1,46 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/marvell,pxa1928-usb-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Marvell PXA1928 USB PHY
> +
> +maintainers:
> + - [email protected]
> +
> +properties:
> + $nodename:
> + pattern: '^phy@[a-f0-9]+$'
> +
> + compatible:
> + const: "marvell,pxa1928-usb-phy"
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + '#phy-cells':
> + const: 0
> +
> + resets:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - '#phy-cells'
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + phy@7000 {
> + compatible = "marvell,pxa1928-usb-phy";
> + reg = <0x7000 0xe0>;
> + clocks = <&apmu_clocks PXA1928_CLK_USB>;
> + #phy-cells = <0>;
> + };
> diff --git a/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt b/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt
> deleted file mode 100644
> index da94426aa694..000000000000
> --- a/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt
> +++ /dev/null
> @@ -1,18 +0,0 @@
> -* Marvell PXA1928 USB and HSIC PHYs
> -
> -Required properties:
> -- compatible: "marvell,pxa1928-usb-phy" or "marvell,pxa1928-hsic-phy"
> -- reg: base address and length of the registers
> -- clocks - A single clock. From common clock binding.
> -- #phys-cells: should be 0. From common phy binding.
> -- resets: reference to the reset controller
> -
> -Example:
> -
> - usbphy: phy@7000 {
> - compatible = "marvell,pxa1928-usb-phy";
> - reg = <0x7000 0xe0>;
> - clocks = <&apmu_clocks PXA1928_CLK_USB>;
> - #phy-cells = <0>;
> - };
> -
>
> ---
> base-commit: 6465e260f48790807eef06b583b38ca9789b6072
> change-id: 20231001-pxa1928-usb-yaml-809564082241
>
> Best regards,
> --
> Duje Mihanović <[email protected]>
>
>
On Monday, October 2, 2023 4:36:19 PM CEST Rob Herring wrote:
> On Sun, Oct 01, 2023 at 03:05:43PM +0200, Duje Mihanović wrote:
> > +maintainers:
> > + - [email protected]
>
> No, should be someone with hardware or familar with it. I added this,
> but no longer have h/w or documentation. IMO, it should probably be
> removed.
My samsung,coreprimevelte's PXA1908 uses this PHY, is it fine if I add myself
there instead of the devicetree list?
Regards,
Duje
On Mon, Oct 02, 2023 at 04:55:08PM +0200, Duje Mihanović wrote:
> On Monday, October 2, 2023 4:36:19 PM CEST Rob Herring wrote:
> > On Sun, Oct 01, 2023 at 03:05:43PM +0200, Duje Mihanović wrote:
> > > +maintainers:
> > > + - [email protected]
> >
> > No, should be someone with hardware or familar with it. I added this,
> > but no longer have h/w or documentation. IMO, it should probably be
> > removed.
>
> My samsung,coreprimevelte's PXA1908 uses this PHY, is it fine if I add myself
> there instead of the devicetree list?
I would say, please do add yourself!