The MIPI I3C spec refers to a Provisioned ID, since it is (sometimes)
provisioned at device manufacturing.
Signed-off-by: Matt Johnston <[email protected]>
---
Documentation/ABI/testing/sysfs-bus-i3c | 4 ++--
Documentation/devicetree/bindings/i3c/i3c.yaml | 4 ++--
Documentation/driver-api/i3c/protocol.rst | 4 ++--
drivers/i3c/master/svc-i3c-master.c | 2 +-
include/linux/i3c/device.h | 2 +-
include/linux/i3c/master.h | 2 +-
6 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-bus-i3c b/Documentation/ABI/testing/sysfs-bus-i3c
index 1f4a2662335b..e5248fd67a56 100644
--- a/Documentation/ABI/testing/sysfs-bus-i3c
+++ b/Documentation/ABI/testing/sysfs-bus-i3c
@@ -67,7 +67,7 @@ What: /sys/bus/i3c/devices/i3c-<bus-id>/pid
KernelVersion: 5.0
Contact: [email protected]
Description:
- PID stands for Provisional ID and is used to uniquely identify
+ PID stands for Provisioned ID and is used to uniquely identify
a device on a bus. This PID contains information about the
vendor, the part and an instance ID so that several devices of
the same type can be connected on the same bus.
@@ -123,7 +123,7 @@ What: /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/pid
KernelVersion: 5.0
Contact: [email protected]
Description:
- PID stands for Provisional ID and is used to uniquely identify
+ PID stands for Provisioned ID and is used to uniquely identify
a device on a bus. This PID contains information about the
vendor, the part and an instance ID so that several devices of
the same type can be connected on the same bus.
diff --git a/Documentation/devicetree/bindings/i3c/i3c.yaml b/Documentation/devicetree/bindings/i3c/i3c.yaml
index ab69f4115de4..f8ac7a3e3123 100644
--- a/Documentation/devicetree/bindings/i3c/i3c.yaml
+++ b/Documentation/devicetree/bindings/i3c/i3c.yaml
@@ -119,12 +119,12 @@ patternProperties:
minimum: 0
maximum: 0x7f
- description: |
- First half of the Provisional ID (following the PID
+ First half of the Provisioned ID (following the PID
definition provided by the I3C specification).
Contains the manufacturer ID left-shifted by 1.
- description: |
- Second half of the Provisional ID (following the PID
+ Second half of the Provisioned ID (following the PID
definition provided by the I3C specification).
Contains the ORing of the part ID left-shifted by 16,
diff --git a/Documentation/driver-api/i3c/protocol.rst b/Documentation/driver-api/i3c/protocol.rst
index 02653defa011..23a0b93c62b1 100644
--- a/Documentation/driver-api/i3c/protocol.rst
+++ b/Documentation/driver-api/i3c/protocol.rst
@@ -71,8 +71,8 @@ During DAA, each I3C device reports 3 important things:
related capabilities
* DCR: Device Characteristic Register. This 8-bit register describes the
functionalities provided by the device
-* Provisional ID: A 48-bit unique identifier. On a given bus there should be no
- Provisional ID collision, otherwise the discovery mechanism may fail.
+* Provisioned ID: A 48-bit unique identifier. On a given bus there should be no
+ Provisioned ID collision, otherwise the discovery mechanism may fail.
I3C slave events
================
diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c
index 32eca2d6caf0..e23d7900c5a1 100644
--- a/drivers/i3c/master/svc-i3c-master.c
+++ b/drivers/i3c/master/svc-i3c-master.c
@@ -765,7 +765,7 @@ static int svc_i3c_master_do_daa_locked(struct svc_i3c_master *master,
u8 data[6];
/*
- * We only care about the 48-bit provisional ID yet to
+ * We only care about the 48-bit provisioned ID yet to
* be sure a device does not nack an address twice.
* Otherwise, we would just need to flush the RX FIFO.
*/
diff --git a/include/linux/i3c/device.h b/include/linux/i3c/device.h
index 90fa83464f00..84ed77c04940 100644
--- a/include/linux/i3c/device.h
+++ b/include/linux/i3c/device.h
@@ -96,7 +96,7 @@ enum i3c_dcr {
/**
* struct i3c_device_info - I3C device information
- * @pid: Provisional ID
+ * @pid: Provisioned ID
* @bcr: Bus Characteristic Register
* @dcr: Device Characteristic Register
* @static_addr: static/I2C address
diff --git a/include/linux/i3c/master.h b/include/linux/i3c/master.h
index 0b52da4f2346..4fd6a777150f 100644
--- a/include/linux/i3c/master.h
+++ b/include/linux/i3c/master.h
@@ -166,7 +166,7 @@ struct i3c_device_ibi_info {
* assigned a dynamic address by the master. Will be used during
* bus initialization to assign it a specific dynamic address
* before starting DAA (Dynamic Address Assignment)
- * @pid: I3C Provisional ID exposed by the device. This is a unique identifier
+ * @pid: I3C Provisioned ID exposed by the device. This is a unique identifier
* that may be used to attach boardinfo to i3c_dev_desc when the device
* does not have a static address
* @of_node: optional DT node in case the device has been described in the DT
--
2.39.2
Hi Matt,
[email protected] wrote on Tue, 3 Oct 2023 15:53:39 +0800:
> The MIPI I3C spec refers to a Provisioned ID, since it is (sometimes)
> provisioned at device manufacturing.
>
> Signed-off-by: Matt Johnston <[email protected]>
Reviewed-by: Miquel Raynal <[email protected]>
Thanks,
Miquèl
On Tue, Oct 03, 2023 at 03:53:39PM +0800, Matt Johnston wrote:
> The MIPI I3C spec refers to a Provisioned ID, since it is (sometimes)
> provisioned at device manufacturing.
>
> Signed-off-by: Matt Johnston <[email protected]>
> ---
> Documentation/ABI/testing/sysfs-bus-i3c | 4 ++--
> Documentation/devicetree/bindings/i3c/i3c.yaml | 4 ++--
Acked-by: Rob Herring <[email protected]>
> Documentation/driver-api/i3c/protocol.rst | 4 ++--
> drivers/i3c/master/svc-i3c-master.c | 2 +-
> include/linux/i3c/device.h | 2 +-
> include/linux/i3c/master.h | 2 +-
> 6 files changed, 9 insertions(+), 9 deletions(-)
On Tue, 03 Oct 2023 15:53:39 +0800, Matt Johnston wrote:
> The MIPI I3C spec refers to a Provisioned ID, since it is (sometimes)
> provisioned at device manufacturing.
>
>
Applied, thanks!
[1/1] i3c: Fix typo "Provisional ID" to "Provisioned ID"
commit: 57ec42b9a1b7e4db4a1c2aa4fcc4eefe6d31bcb8
Best regards,
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com