In case of using simplefb or another conflicting framebuffer,
call drm_aperture_remove_framebuffers() to remove memory allocated.
Signed-off-by: Yannick Fertre <[email protected]>
---
drivers/gpu/drm/stm/drv.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/gpu/drm/stm/drv.c b/drivers/gpu/drm/stm/drv.c
index 222869b232ae..5ba46f70f081 100644
--- a/drivers/gpu/drm/stm/drv.c
+++ b/drivers/gpu/drm/stm/drv.c
@@ -14,6 +14,7 @@
#include <linux/of_platform.h>
#include <linux/pm_runtime.h>
+#include <drm/drm_aperture.h>
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_drv.h>
@@ -193,6 +194,10 @@ static int stm_drm_platform_probe(struct platform_device *pdev)
if (ret)
goto err_put;
+ ret = drm_aperture_remove_framebuffers(false, &drv_driver);
+ if (ret)
+ goto err_put;
+
ret = drm_dev_register(ddev, 0);
if (ret)
goto err_put;
--
2.17.1
Hi
Am 03.12.21 um 09:55 schrieb Yannick Fertre:
> In case of using simplefb or another conflicting framebuffer,
> call drm_aperture_remove_framebuffers() to remove memory allocated.
>
> Signed-off-by: Yannick Fertre <[email protected]>
> ---
> drivers/gpu/drm/stm/drv.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/gpu/drm/stm/drv.c b/drivers/gpu/drm/stm/drv.c
> index 222869b232ae..5ba46f70f081 100644
> --- a/drivers/gpu/drm/stm/drv.c
> +++ b/drivers/gpu/drm/stm/drv.c
> @@ -14,6 +14,7 @@
> #include <linux/of_platform.h>
> #include <linux/pm_runtime.h>
>
> +#include <drm/drm_aperture.h>
> #include <drm/drm_atomic.h>
> #include <drm/drm_atomic_helper.h>
> #include <drm/drm_drv.h>
> @@ -193,6 +194,10 @@ static int stm_drm_platform_probe(struct platform_device *pdev)
> if (ret)
> goto err_put;
>
> + ret = drm_aperture_remove_framebuffers(false, &drv_driver);
> + if (ret)
> + goto err_put;
> +
This has to be done at the very top of the probe function, before
anything that touches the device. Otherwise both drivers interfere with
each other while probing and setup's going on.
Best regards
Thomas
> ret = drm_dev_register(ddev, 0);
> if (ret)
> goto err_put;
>
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Ivo Totev
Hi Thomas,
On 12/3/21 10:35 AM, Thomas Zimmermann wrote:
> Hi
>
> Am 03.12.21 um 09:55 schrieb Yannick Fertre:
>> In case of using simplefb or another conflicting framebuffer,
>> call drm_aperture_remove_framebuffers() to remove memory allocated.
>>
>> Signed-off-by: Yannick Fertre <[email protected]>
>> ---
>> drivers/gpu/drm/stm/drv.c | 5 +++++
>> 1 file changed, 5 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/stm/drv.c b/drivers/gpu/drm/stm/drv.c
>> index 222869b232ae..5ba46f70f081 100644
>> --- a/drivers/gpu/drm/stm/drv.c
>> +++ b/drivers/gpu/drm/stm/drv.c
>> @@ -14,6 +14,7 @@
>> #include <linux/of_platform.h>
>> #include <linux/pm_runtime.h>
>> +#include <drm/drm_aperture.h>
>> #include <drm/drm_atomic.h>
>> #include <drm/drm_atomic_helper.h>
>> #include <drm/drm_drv.h>
>> @@ -193,6 +194,10 @@ static int stm_drm_platform_probe(struct
>> platform_device *pdev)
>> if (ret)
>> goto err_put;
>> + ret = drm_aperture_remove_framebuffers(false, &drv_driver);
>> + if (ret)
>> + goto err_put;
>> +
>
> This has to be done at the very top of the probe function, before
> anything that touches the device. Otherwise both drivers interfere with
> each other while probing and setup's going on.
>
> Best regards
> Thomas
>
>> ret = drm_dev_register(ddev, 0);
>> if (ret)
>> goto err_put;
>>
>
Thanks for reviewing the patch.
I will follow your advice and push a new patch.
Yannick