(re-sending as the cover letter didn't make it for me)
Until now, only Cedrus (a slice base decoder) supported interlaced
decoding. In order to support field decoding in our frame-based decoder,
the v4l2-h264 library needed adaptation to produce the appropriate
reference lists.
This patch extends the v4l2-h264 library to produce the larger references
list needed to represent fields separately. Hantro, MTK-VCODEC and RKVDEC
drivers have been adapted to accommodate the larger lists. Though, only
Hantro and RKVDEC actually have HW support for field decoding. So only
these two have been updated to make use of the larger lists. All this work
has been done using the H.264 specification, LibreELEC downstream kernel
patches, Rockchip MPP reference software and Hantro reference software.
For reviewers, the following is the map of all commit. Patches that could
be merge independently of this serie are marked as independent. Note that
the test results do depend on the generic fixes.
01 : Documentation fix (independent)
02-03 : Improving some generic traces (independent)
04 : Minor v4l2-h264 fix (independent)
05-11 : v4l2-h264 field decoding support
12-15 : rkvdec h.264 generic fixes (independent)
16-19 : rkvdec h.264 field decoding support
20-23 : hantro h.264 field decoding support
All this work have been tested using GStreamer mainline implementation
but also with FFMPEG LibreELEC fork using the testing tool fluster
running through the ITU-T H.264 (2016-02) AVCv2 set of bitstream. Before
this patch, the scores were:
Hantro:
FFMPEG: 88/135
GSteamer: 90/135
RKVDEC:
FFMPEG: 73/135
GSteamer: 77/135
And after these changes:
Hantro:
FFMPEG: 118/135
GSteamer: 129/135
RKVDEC:
FFMPEG: 118/135
GSteamer: 129/135
Note that a bug in FFMPEG / LibreELEC fork was noticed and fixed with the
following change:
diff --git a/libavcodec/v4l2_request_h264.c b/libavcodec/v4l2_request_h264.c
index 88da8f0a2d..394bae0550 100644
--- a/libavcodec/v4l2_request_h264.c
+++ b/libavcodec/v4l2_request_h264.c
@@ -66,7 +66,7 @@ static void fill_dpb_entry(struct v4l2_h264_dpb_entry *entry,
const H264Picture
{
entry->reference_ts = ff_v4l2_request_get_capture_timestamp(pic->f);
entry->pic_num = pic->pic_id;
- entry->frame_num = pic->frame_num;
+ entry->frame_num = pic->long_ref ? pic->pic_id : pic->frame_num;
entry->fields = pic->reference & V4L2_H264_FRAME_REF;
entry->flags = V4L2_H264_DPB_ENTRY_FLAG_VALID;
if (entry->fields)
Some useful links:
Detailed Hantro Results: https://gitlab.freedesktop.org/-/snippets/5189
Detailed RKVDEC Results: https://gitlab.freedesktop.org/-/snippets/5253
ITU-T H.264 (2016-02) AVCv2:
https://www.itu.int/net/itu-t/sigdb/spevideo/VideoForm-s.aspx?val=102002641
Fluster: https://github.com/fluendo/fluster
GStreamer: https://gitlab.freedesktop.org/gstreamer/gstreamer/
FFMPEG Fork:
https://github.com/jernejsk/FFmpeg/tree/v4l2-request-hwaccel-4.4
Rockchip MPP: https://github.com/rockchip-linux/mpp
Changes in v2:
- Applied most of Sebastian's suggestion in comments and commit messages.
- Use a bool for dpb_valid and dpb_bottom in rkvdec
- Dropped one wrong typo fix (media: v4l2-mem2mem: Fix typo in trace message)
- Dropped Alex fix (media: rkvdec-h264: Don't hardcode SPS/PPS parameters
+ I will carry this one later, it seems cosmetic
Jonas Karlman (5):
media: rkvdec: h264: Fix bit depth wrap in pps packet
media: rkvdec: h264: Validate and use pic width and height in mbs
media: rkvdec: h264: Fix reference frame_num wrap for second field
media: rkvdec: Ensure decoded resolution fit coded resolution
media: hantro: h264: Make dpb entry management more robust
Nicolas Dufresne (17):
media: doc: Document dual use of H.264 pic_num/frame_num
media: v4l2-mem2mem: Trace on implicit un-hold
media: h264: Avoid wrapping long_term_frame_idx
media: h264: Use v4l2_h264_reference for reflist
media: h264: Increase reference lists size to 32
media: h264: Store current picture fields
media: h264: Store all fields into the unordered list
media: v4l2: Trace calculated p/b0/b1 initial reflist
media: h264: Sort p/b reflist using frame_num
media: v4l2: Reorder field reflist
media: rkvdec: Stop overclocking the decoder
media: rkvdec: h264: Fix dpb_valid implementation
media: rkvdec: Enable capture buffer holding for H264
media: rkvdec-h264: Add field decoding support
media: hantro: Enable HOLD_CAPTURE_BUF for H.264
media: hantro: Stop using H.264 parameter pic_num
media: hantro: Add H.264 field decoding support
Sebastian Fricke (1):
media: videobuf2-v4l2: Warn on holding buffers without support
.../media/v4l/ext-ctrls-codec-stateless.rst | 10 +-
.../media/common/videobuf2/videobuf2-v4l2.c | 7 +-
.../mediatek/vcodec/vdec/vdec_h264_req_if.c | 17 +-
drivers/media/v4l2-core/v4l2-h264.c | 261 ++++++++++++++----
drivers/media/v4l2-core/v4l2-mem2mem.c | 1 +
.../staging/media/hantro/hantro_g1_h264_dec.c | 38 +--
drivers/staging/media/hantro/hantro_h264.c | 119 ++++++--
drivers/staging/media/hantro/hantro_hw.h | 7 +-
drivers/staging/media/hantro/hantro_v4l2.c | 25 ++
.../media/hantro/rockchip_vpu2_hw_h264_dec.c | 98 +++----
drivers/staging/media/rkvdec/rkvdec-h264.c | 91 +++---
drivers/staging/media/rkvdec/rkvdec.c | 22 +-
drivers/staging/media/rkvdec/rkvdec.h | 1 +
include/media/v4l2-h264.h | 31 ++-
14 files changed, 520 insertions(+), 208 deletions(-)
--
2.34.1