2023-11-23 11:02:33

by Michael Walle

[permalink] [raw]
Subject: [PATCH] phy: mediatek: mipi: mt8183: fix minimal supported frequency

The lowest supported clock frequency of the PHY is 125MHz (see also
mtk_mipi_tx_pll_enable()), but the clamping in .round_rate() has the
wrong minimal value, which will make the .enable() op return -EINVAL on
low frequencies. Fix the minimal clamping value.

Fixes: efda51a58b4a ("drm/mediatek: add mipi_tx driver for mt8183")
Signed-off-by: Michael Walle <[email protected]>
---
drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c b/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c
index f021ec5a70e5..553725e1269c 100644
--- a/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c
+++ b/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c
@@ -100,7 +100,7 @@ static void mtk_mipi_tx_pll_disable(struct clk_hw *hw)
static long mtk_mipi_tx_pll_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *prate)
{
- return clamp_val(rate, 50000000, 1600000000);
+ return clamp_val(rate, 125000000, 1600000000);
}

static const struct clk_ops mtk_mipi_tx_pll_ops = {
--
2.39.2


Subject: Re: [PATCH] phy: mediatek: mipi: mt8183: fix minimal supported frequency

Il 23/11/23 12:02, Michael Walle ha scritto:
> The lowest supported clock frequency of the PHY is 125MHz (see also
> mtk_mipi_tx_pll_enable()), but the clamping in .round_rate() has the
> wrong minimal value, which will make the .enable() op return -EINVAL on
> low frequencies. Fix the minimal clamping value.
>
> Fixes: efda51a58b4a ("drm/mediatek: add mipi_tx driver for mt8183")
> Signed-off-by: Michael Walle <[email protected]>

Reviewed-by: AngeloGioacchino Del Regno <[email protected]>

2023-11-27 13:22:19

by Vinod Koul

[permalink] [raw]
Subject: Re: [PATCH] phy: mediatek: mipi: mt8183: fix minimal supported frequency


On Thu, 23 Nov 2023 12:02:02 +0100, Michael Walle wrote:
> The lowest supported clock frequency of the PHY is 125MHz (see also
> mtk_mipi_tx_pll_enable()), but the clamping in .round_rate() has the
> wrong minimal value, which will make the .enable() op return -EINVAL on
> low frequencies. Fix the minimal clamping value.
>
>

Applied, thanks!

[1/1] phy: mediatek: mipi: mt8183: fix minimal supported frequency
commit: 06f76e464ac81c6915430b7155769ea4ef16efe4

Best regards,
--
~Vinod