The main_uart0 may not always be the console, but it will always be
the UART0 in MAIN domain. Name the pinmux node to match. This makes
it consistent with all other TI SoC based boards.
Signed-off-by: Andrew Davis <[email protected]>
---
Changes for v2:
- Update node name to -pins postfix
- Rebase on v6.7-rc1
arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
index 9a6bd0a3c94f7..eadbdd9ffe377 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -443,7 +443,7 @@ AM62X_IOPAD(0x01a8, PIN_INPUT, 7) /* (D20) MCASP0_AFSX.GPIO1_12 */
>;
};
- console_pins_default: console-default-pins {
+ main_uart0_pins_default: main-uart0-default-pins {
bootph-all;
pinctrl-single,pins = <
AM62X_IOPAD(0x01c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
@@ -877,7 +877,7 @@ wlcore: wlcore@2 {
&main_uart0 {
bootph-all;
pinctrl-names = "default";
- pinctrl-0 = <&console_pins_default>;
+ pinctrl-0 = <&main_uart0_pins_default>;
status = "okay";
};
--
2.39.2
Hi Andrew Davis,
On Mon, 27 Nov 2023 13:36:02 -0600, Andrew Davis wrote:
> The main_uart0 may not always be the console, but it will always be
> the UART0 in MAIN domain. Name the pinmux node to match. This makes
> it consistent with all other TI SoC based boards.
>
>
I have applied the following to branch ti-k3-dts-next on [1].
Thank you!
[1/1] arm64: dts: ti: k3-am625-beagleplay: Use UART name in pinmux name
commit: 649e121f9301a4d275b68323a9807b762618e516
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D