2023-12-03 15:50:05

by Chukun Pan

Subject: [PATCH v2 1/1] arm64: dts: qcom: ipq6018: Add remaining QUP UART node

Add node to support all the QUP UART node controller inside of IPQ6018.
Some routers use these bus to connect Bluetooth chips.

Signed-off-by: Chukun Pan <[email protected]>
---
Changes in v2:
* No changes, resend due to error link to other threads.

arch/arm64/boot/dts/qcom/ipq6018.dtsi | 50 +++++++++++++++++++++++++++
1 file changed, 50 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 9aec89d5e095..ec0a0ce1849e 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -439,6 +439,26 @@ blsp_dma: dma-controller@7884000 {
qcom,ee = <0>;
};

+ blsp1_uart1: serial@78af000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x0 0x78af000 0x0 0x200>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ blsp1_uart2: serial@78b0000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x0 0x78b0000 0x0 0x200>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
blsp1_uart3: serial@78b1000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x0 0x078b1000 0x0 0x200>;
@@ -449,6 +469,36 @@ blsp1_uart3: serial@78b1000 {
status = "disabled";
};

+ blsp1_uart4: serial@78b2000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x0 0x078b2000 0x0 0x200>;
+ interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ blsp1_uart5: serial@78b3000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x0 0x78b3000 0x0 0x200>;
+ interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ blsp1_uart6: serial@78b4000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x0 0x078b4000 0x0 0x200>;
+ interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
blsp1_spi1: spi@78b5000 {
compatible = "qcom,spi-qup-v2.2.1";
#address-cells = <1>;
--
2.25.1

2023-12-17 17:23:05

by Bjorn Andersson

Subject: Re: (subset) [PATCH v2 1/1] arm64: dts: qcom: ipq6018: Add remaining QUP UART node

On Sun, 03 Dec 2023 23:39:14 +0800, Chukun Pan wrote:
> Add node to support all the QUP UART node controller inside of IPQ6018.
> Some routers use these bus to connect Bluetooth chips.
>
>

Applied, thanks!

[1/1] arm64: dts: qcom: ipq6018: Add remaining QUP UART node
commit: e6c32770ef83f3e8cc057f3920b1c06aa9d1c9c2

Best regards,
--
Bjorn Andersson <[email protected]>