2023-11-22 18:18:54

by Stefan Eichenberger

[permalink] [raw]
Subject: [PATCH] rtc: rv8803: Add power management support

Add power management support to the driver. This allows a SoC to wake
from suspend using the nINT provided by the RTC. Only register it as a
wakeup device if the interrupt is provided and handled.

Signed-off-by: Stefan Eichenberger <[email protected]>
---
drivers/rtc/rtc-rv8803.c | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)

diff --git a/drivers/rtc/rtc-rv8803.c b/drivers/rtc/rtc-rv8803.c
index 1a3ec1bb5b814..11e6b0d31f5d7 100644
--- a/drivers/rtc/rtc-rv8803.c
+++ b/drivers/rtc/rtc-rv8803.c
@@ -17,6 +17,7 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/rtc.h>
+#include <linux/pm_wakeirq.h>

#define RV8803_I2C_TRY_COUNT 4

@@ -607,6 +608,28 @@ static int rv8803_regs_configure(struct rv8803_data *rv8803)
return 0;
}

+static int rv8803_resume(struct device *dev)
+{
+ struct rv8803_data *rv8803 = dev_get_drvdata(dev);
+
+ if (rv8803->client->irq > 0 && device_may_wakeup(dev))
+ disable_irq_wake(rv8803->client->irq);
+
+ return 0;
+}
+
+static int rv8803_suspend(struct device *dev)
+{
+ struct rv8803_data *rv8803 = dev_get_drvdata(dev);
+
+ if (rv8803->client->irq > 0 && device_may_wakeup(dev))
+ enable_irq_wake(rv8803->client->irq);
+
+ return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(rv8803_pm_ops, rv8803_suspend, rv8803_resume);
+
static const struct i2c_device_id rv8803_id[] = {
{ "rv8803", rv_8803 },
{ "rv8804", rx_8804 },
@@ -683,6 +706,11 @@ static int rv8803_probe(struct i2c_client *client)
if (err) {
dev_warn(&client->dev, "unable to request IRQ, alarms disabled\n");
client->irq = 0;
+ } else {
+ device_init_wakeup(&client->dev, true);
+ err = dev_pm_set_wake_irq(&client->dev, client->irq);
+ if (err)
+ dev_err(&client->dev, "failed to set wake IRQ\n");
}
}
if (!client->irq)
@@ -737,6 +765,7 @@ static struct i2c_driver rv8803_driver = {
.driver = {
.name = "rtc-rv8803",
.of_match_table = of_match_ptr(rv8803_of_match),
+ .pm = &rv8803_pm_ops,
},
.probe = rv8803_probe,
.id_table = rv8803_id,
--
2.40.1


2024-01-08 00:31:45

by Alexandre Belloni

[permalink] [raw]
Subject: Re: [PATCH] rtc: rv8803: Add power management support


On Wed, 22 Nov 2023 19:16:11 +0100, Stefan Eichenberger wrote:
> Add power management support to the driver. This allows a SoC to wake
> from suspend using the nINT provided by the RTC. Only register it as a
> wakeup device if the interrupt is provided and handled.
>
>

Applied, thanks!

[1/1] rtc: rv8803: Add power management support
commit: 2f80de657f83a1f6495e557096847f4626d57164

Best regards,

--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com