Register value persist after booting the kernel using
kexec which results in kernel panic. Thus clear the
BM pool registers before initialisation to fix the issue.
Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Jenishkumar Maheshbhai Patel <[email protected]>
---
v1-v2:
-Move comments outside the loop
-remove unrequired brances.
v2-v3:
-improve readability
-correct register read API
v3-v4:
-optimize the code
-improve readability
.../net/ethernet/marvell/mvpp2/mvpp2_main.c | 27 ++++++++++++++++++-
1 file changed, 26 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 820b1fabe297..23adf53c2aa1 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -614,12 +614,38 @@ static void mvpp23_bm_set_8pool_mode(struct mvpp2 *priv)
mvpp2_write(priv, MVPP22_BM_POOL_BASE_ADDR_HIGH_REG, val);
}
+/* Cleanup pool before actual initialization in the OS */
+static void mvpp2_bm_pool_cleanup(struct mvpp2 *priv, int pool_id)
+{
+ unsigned int thread = mvpp2_cpu_to_thread(priv, get_cpu());
+ u32 val;
+ int i;
+
+ /* Drain the BM from all possible residues left by firmware */
+ for (i = 0; i < MVPP2_BM_POOL_SIZE_MAX; i++)
+ mvpp2_thread_read(priv, thread, MVPP2_BM_PHY_ALLOC_REG(pool_id));
+
+ put_cpu();
+
+ /* Stop the BM pool */
+ val = mvpp2_read(priv, MVPP2_BM_POOL_CTRL_REG(pool_id));
+ val |= MVPP2_BM_STOP_MASK;
+ mvpp2_write(priv, MVPP2_BM_POOL_CTRL_REG(pool_id), val);
+}
+
static int mvpp2_bm_init(struct device *dev, struct mvpp2 *priv)
{
enum dma_data_direction dma_dir = DMA_FROM_DEVICE;
int i, err, poolnum = MVPP2_BM_POOLS_NUM;
struct mvpp2_port *port;
+ if (priv->percpu_pools)
+ poolnum = mvpp2_get_nrxqs(priv) * 2;
+
+ /* Clean up the pool state in case it contains stale state */
+ for (i = 0; i < poolnum; i++)
+ mvpp2_bm_pool_cleanup(priv, i);
+
if (priv->percpu_pools) {
for (i = 0; i < priv->port_count; i++) {
port = priv->port_list[i];
@@ -629,7 +655,6 @@ static int mvpp2_bm_init(struct device *dev, struct mvpp2 *priv)
}
}
- poolnum = mvpp2_get_nrxqs(priv) * 2;
for (i = 0; i < poolnum; i++) {
/* the pool in use */
int pn = i / (poolnum / 2);
--
2.25.1
Hello:
This patch was applied to netdev/net.git (main)
by Jakub Kicinski <[email protected]>:
On Thu, 18 Jan 2024 19:59:14 -0800 you wrote:
> Register value persist after booting the kernel using
> kexec which results in kernel panic. Thus clear the
> BM pool registers before initialisation to fix the issue.
>
> Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
> Signed-off-by: Jenishkumar Maheshbhai Patel <[email protected]>
>
> [...]
Here is the summary with links:
- [net,v4,1/1] net: mvpp2: clear BM pool before initialization
https://git.kernel.org/netdev/net/c/9f538b415db8
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html