Replace hard-coded interrupt parts (GIC, flags) with standard defines
for readability. No changes in resulting DTBs.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
Changes in v2:
1. Convert few more values to defines (GIC_PPI) - the tedious part which
Konrad wanted.
---
arch/arm/boot/dts/qcom/qcom-apq8064.dtsi | 38 ++++++++++++------------
arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi | 8 ++---
arch/arm/boot/dts/qcom/qcom-msm8660.dtsi | 14 ++++-----
arch/arm/boot/dts/qcom/qcom-msm8974.dtsi | 18 +++++------
arch/arm/boot/dts/qcom/qcom-sdx55.dtsi | 18 +++++------
arch/arm/boot/dts/qcom/qcom-sdx65.dtsi | 26 ++++++++--------
6 files changed, 61 insertions(+), 61 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 95ac25e1a3b4..4a0be9b45712 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -190,7 +190,7 @@ cpu_crit3: trip1 {
cpu-pmu {
compatible = "qcom,krait-pmu";
- interrupts = <1 10 0x304>;
+ interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
};
clocks {
@@ -244,7 +244,7 @@ apps_smsm: apps@0 {
modem_smsm: modem@1 {
reg = <1>;
- interrupts = <0 38 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -252,7 +252,7 @@ modem_smsm: modem@1 {
q6_smsm: q6@2 {
reg = <2>;
- interrupts = <0 89 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -260,7 +260,7 @@ q6_smsm: q6@2 {
wcnss_smsm: wcnss@3 {
reg = <3>;
- interrupts = <0 204 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 204 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -268,7 +268,7 @@ wcnss_smsm: wcnss@3 {
dsps_smsm: dsps@4 {
reg = <4>;
- interrupts = <0 137 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -299,7 +299,7 @@ tlmm_pinmux: pinctrl@800000 {
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&ps_hold>;
@@ -321,9 +321,9 @@ intc: interrupt-controller@2000000 {
timer@200a000 {
compatible = "qcom,kpss-wdt-apq8064", "qcom,kpss-timer",
"qcom,msm-timer";
- interrupts = <1 1 0x301>,
- <1 2 0x301>,
- <1 3 0x301>;
+ interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+ <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
reg = <0x0200a000 0x100>;
clock-frequency = <27000000>;
cpu-offset = <0x80000>;
@@ -411,7 +411,7 @@ gsbi1_serial: serial@12450000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x12450000 0x100>,
<0x12400000 0x03>;
- interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -423,7 +423,7 @@ gsbi1_i2c: i2c@12460000 {
pinctrl-1 = <&i2c1_pins_sleep>;
pinctrl-names = "default", "sleep";
reg = <0x12460000 0x1000>;
- interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
@@ -452,7 +452,7 @@ gsbi2_i2c: i2c@124a0000 {
pinctrl-0 = <&i2c2_pins>;
pinctrl-1 = <&i2c2_pins_sleep>;
pinctrl-names = "default", "sleep";
- interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
@@ -539,7 +539,7 @@ gsbi5_serial: serial@1a240000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x1a240000 0x100>,
<0x1a200000 0x03>;
- interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -548,7 +548,7 @@ gsbi5_serial: serial@1a240000 {
gsbi5_spi: spi@1a280000 {
compatible = "qcom,spi-qup-v1.1.1";
reg = <0x1a280000 0x1000>;
- interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&spi5_default>;
pinctrl-1 = <&spi5_sleep>;
pinctrl-names = "default", "sleep";
@@ -575,7 +575,7 @@ gsbi6_serial: serial@16540000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16540000 0x100>,
<0x16500000 0x03>;
- interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -611,7 +611,7 @@ gsbi7_serial: serial@16640000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16640000 0x1000>,
<0x16600000 0x1000>;
- interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -908,7 +908,7 @@ sdcc3: mmc@12180000 {
sdcc3bam: dma-controller@12182000 {
compatible = "qcom,bam-v1.3.0";
reg = <0x12182000 0x8000>;
- interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SDC3_H_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
@@ -936,7 +936,7 @@ sdcc4: mmc@121c0000 {
sdcc4bam: dma-controller@121c2000 {
compatible = "qcom,bam-v1.3.0";
reg = <0x121c2000 0x8000>;
- interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SDC4_H_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
@@ -965,7 +965,7 @@ sdcc1: mmc@12400000 {
sdcc1bam: dma-controller@12402000 {
compatible = "qcom,bam-v1.3.0";
reg = <0x12402000 0x8000>;
- interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SDC1_H_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
index b9c8517e15e7..114c92b4d8d4 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -162,10 +162,10 @@ scm {
timer {
compatible = "arm,armv7-timer";
- interrupts = <1 2 0xf08>,
- <1 3 0xf08>,
- <1 4 0xf08>,
- <1 1 0xf08>;
+ interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
clock-frequency = <48000000>;
always-on;
};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
index a7c245b9c8f9..17188fe54617 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
@@ -47,7 +47,7 @@ memory {
cpu-pmu {
compatible = "qcom,scorpion-mp-pmu";
- interrupts = <1 9 0x304>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
};
clocks {
@@ -89,9 +89,9 @@ intc: interrupt-controller@2080000 {
timer@2000000 {
compatible = "qcom,scss-timer", "qcom,msm-timer";
- interrupts = <1 0 0x301>,
- <1 1 0x301>,
- <1 2 0x301>;
+ interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+ <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
reg = <0x02000000 0x100>;
clock-frequency = <27000000>,
<32768>;
@@ -105,7 +105,7 @@ tlmm: pinctrl@800000 {
gpio-controller;
gpio-ranges = <&tlmm 0 0 173>;
#gpio-cells = <2>;
- interrupts = <0 16 0x4>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -283,7 +283,7 @@ gsbi12_serial: serial@19c40000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x19c40000 0x1000>,
<0x19c00000 0x1000>;
- interrupts = <0 195 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -292,7 +292,7 @@ gsbi12_serial: serial@19c40000 {
gsbi12_i2c: i2c@19c80000 {
compatible = "qcom,i2c-qup-v1.1.1";
reg = <0x19c80000 0x1000>;
- interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
index ee202f3f161e..c15c4e6e7754 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
@@ -31,7 +31,7 @@ sleep_clk: sleep_clk {
cpus {
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_PPI 9 0xf04>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
CPU0: cpu@0 {
compatible = "qcom,krait";
@@ -110,7 +110,7 @@ memory {
pmu {
compatible = "qcom,krait-pmu";
- interrupts = <GIC_PPI 7 0xf04>;
+ interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
rpm: remoteproc {
@@ -538,7 +538,7 @@ blsp1_i2c1: i2c@f9923000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9923000 0x1000>;
- interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
@@ -566,7 +566,7 @@ blsp1_i2c3: i2c@f9925000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9925000 0x1000>;
- interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
@@ -666,7 +666,7 @@ blsp2_i2c6: i2c@f9968000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9968000 0x1000>;
- interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
@@ -2410,10 +2410,10 @@ gpu2_alert0: trip-point0 {
timer {
compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 2 0xf08>,
- <GIC_PPI 3 0xf08>,
- <GIC_PPI 4 0xf08>,
- <GIC_PPI 1 0xf08>;
+ interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
clock-frequency = <19200000>;
};
};
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
index 49d9bfeb0c7f..dcb0179996a2 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
@@ -728,57 +728,57 @@ timer@17820000 {
frame@17821000 {
frame-number = <0>;
- interrupts = <GIC_SPI 7 0x4>,
- <GIC_SPI 6 0x4>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17821000 0x1000>,
<0x17822000 0x1000>;
};
frame@17823000 {
frame-number = <1>;
- interrupts = <GIC_SPI 8 0x4>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17823000 0x1000>;
status = "disabled";
};
frame@17824000 {
frame-number = <2>;
- interrupts = <GIC_SPI 9 0x4>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17824000 0x1000>;
status = "disabled";
};
frame@17825000 {
frame-number = <3>;
- interrupts = <GIC_SPI 10 0x4>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17825000 0x1000>;
status = "disabled";
};
frame@17826000 {
frame-number = <4>;
- interrupts = <GIC_SPI 11 0x4>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17826000 0x1000>;
status = "disabled";
};
frame@17827000 {
frame-number = <5>;
- interrupts = <GIC_SPI 12 0x4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17827000 0x1000>;
status = "disabled";
};
frame@17828000 {
frame-number = <6>;
- interrupts = <GIC_SPI 13 0x4>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17828000 0x1000>;
status = "disabled";
};
frame@17829000 {
frame-number = <7>;
- interrupts = <GIC_SPI 14 0x4>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17829000 0x1000>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
index bad47174b66c..9ab3e7166b37 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
@@ -671,57 +671,57 @@ timer@17820000 {
frame@17821000 {
frame-number = <0>;
- interrupts = <GIC_SPI 7 0x4>,
- <GIC_SPI 6 0x4>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17821000 0x1000>,
<0x17822000 0x1000>;
};
frame@17823000 {
frame-number = <1>;
- interrupts = <GIC_SPI 8 0x4>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17823000 0x1000>;
status = "disabled";
};
frame@17824000 {
frame-number = <2>;
- interrupts = <GIC_SPI 9 0x4>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17824000 0x1000>;
status = "disabled";
};
frame@17825000 {
frame-number = <3>;
- interrupts = <GIC_SPI 10 0x4>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17825000 0x1000>;
status = "disabled";
};
frame@17826000 {
frame-number = <4>;
- interrupts = <GIC_SPI 11 0x4>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17826000 0x1000>;
status = "disabled";
};
frame@17827000 {
frame-number = <5>;
- interrupts = <GIC_SPI 12 0x4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17827000 0x1000>;
status = "disabled";
};
frame@17828000 {
frame-number = <6>;
- interrupts = <GIC_SPI 13 0x4>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17828000 0x1000>;
status = "disabled";
};
frame@17829000 {
frame-number = <7>;
- interrupts = <GIC_SPI 14 0x4>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17829000 0x1000>;
status = "disabled";
};
@@ -808,10 +808,10 @@ apps_bcm_voter: bcm-voter {
timer {
compatible = "arm,armv7-timer";
- interrupts = <1 13 0xf08>,
- <1 12 0xf08>,
- <1 10 0xf08>,
- <1 11 0xf08>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
clock-frequency = <19200000>;
};
};
--
2.34.1
On 12/5/23 16:33, Krzysztof Kozlowski wrote:
> Replace hard-coded interrupt parts (GIC, flags) with standard defines
> for readability. No changes in resulting DTBs.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
>
> ---
>
> Changes in v2:
> 1. Convert few more values to defines (GIC_PPI) - the tedious part which
> Konrad wanted.
> ---
Thanks!
Reviewed-by: Konrad Dybcio <[email protected]>
Konrad
On Tue, 05 Dec 2023 16:33:17 +0100, Krzysztof Kozlowski wrote:
> Replace hard-coded interrupt parts (GIC, flags) with standard defines
> for readability. No changes in resulting DTBs.
>
>
Applied, thanks!
[1/1] ARM: dts: qcom: use defines for interrupts
commit: 81924ec7a0d50f6fe3ed5a616ae3ef30f1edd932
Best regards,
--
Bjorn Andersson <[email protected]>