Hello!
This is the second patch series with the goal of simplifying the MT7530 DSA
subdriver and improving support for MT7530, MT7531, and the switch on the
MT7988 SoC.
I have done a simple ping test to confirm basic communication on all switch
ports on MCM and standalone MT7530, and MT7531 switch with this patch
series applied.
MT7621 Unielec, MCM MT7530:
rgmii-only-gmac0-mt7621-unielec-u7621-06-16m.dtb
gmac0-and-gmac1-mt7621-unielec-u7621-06-16m.dtb
tftpboot 0x80008000 mips-uzImage.bin; tftpboot 0x83000000 mips-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootm 0x80008000 0x83000000 0x83f00000
MT7622 Bananapi, MT7531:
gmac0-and-gmac1-mt7622-bananapi-bpi-r64.dtb
tftpboot 0x40000000 arm64-Image; tftpboot 0x45000000 arm64-rootfs.cpio.uboot; tftpboot 0x4a000000 $dtb; booti 0x40000000 0x45000000 0x4a000000
MT7623 Bananapi, standalone MT7530:
rgmii-only-gmac0-mt7623n-bananapi-bpi-r2.dtb
gmac0-and-gmac1-mt7623n-bananapi-bpi-r2.dtb
tftpboot 0x80008000 arm-zImage; tftpboot 0x83000000 arm-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootz 0x80008000 0x83000000 0x83f00000
This patch series is the continuation of the patch series linked below.
https://lore.kernel.org/r/[email protected]
Signed-off-by: Arınç ÜNAL <[email protected]>
---
Changes in v5:
- Update the patches with the latest received trailers.
- Patch 3
- Replace "return;" with "return 0;".
- Patch 4
- Remove the stray brace.
- Link to v4: https://lore.kernel.org/r/20240204-for-netnext-mt7530-improvements-2-v4-0-02bf0abaadb8@arinc9.com
Changes in v4:
- Update the patches with the latest received trailers.
- Leave no error returns on mt7530_pad_clk_setup() before renaming it to
mt7530_setup_port6() and moving it to under mt7530_mac_config().
- Link to v3: https://lore.kernel.org/r/20240202-for-netnext-mt7530-improvements-2-v3-0-63d5adae99ca@arinc9.com
Changes in v3:
- Update the patches with the latest received trailers.
- Patch 5
- Disable TRGMII clocks for all cases.
- Link to v2: https://lore.kernel.org/r/20240130-for-netnext-mt7530-improvements-2-v2-0-ba06f5dd9eb0@arinc9.com
Changes in v2:
- Update the patches with the latest received trailers.
- Remove 'net: dsa: mt7530: move enabling port 6 to mt7530_setup_port6()'
which was patch 5. I will bring a more appropriate change with a later
patch series.
- Patch 5
- Set P6_INTF_MODE(0) and explain why on the patch log.
- Patch 6
- Mention the MT7988 document and explain more on the patch log.
- Patch 7
- Explain more on the patch log.
- Link to v1: https://lore.kernel.org/r/[email protected]
---
Arınç ÜNAL (7):
net: dsa: mt7530: empty default case on mt7530_setup_port5()
net: dsa: mt7530: move XTAL check to mt7530_setup()
net: dsa: mt7530: simplify mt7530_pad_clk_setup()
net: dsa: mt7530: call port 6 setup from mt7530_mac_config()
net: dsa: mt7530: remove pad_setup function pointer
net: dsa: mt7530: correct port capabilities of MT7988
net: dsa: mt7530: do not clear config->supported_interfaces
drivers/net/dsa/mt7530.c | 152 +++++++++++++++++------------------------------
drivers/net/dsa/mt7530.h | 3 -
2 files changed, 53 insertions(+), 102 deletions(-)
---
base-commit: 4acf4e62cd572b0c806035046b3698f5585ab821
change-id: 20240121-for-netnext-mt7530-improvements-2-b4f43661b485
Best regards,
--
Arınç ÜNAL <[email protected]>
Hello:
This series was applied to netdev/net-next.git (main)
by Jakub Kicinski <[email protected]>:
On Tue, 06 Feb 2024 01:08:01 +0300 you wrote:
> Hello!
>
> This is the second patch series with the goal of simplifying the MT7530 DSA
> subdriver and improving support for MT7530, MT7531, and the switch on the
> MT7988 SoC.
>
> I have done a simple ping test to confirm basic communication on all switch
> ports on MCM and standalone MT7530, and MT7531 switch with this patch
> series applied.
>
> [...]
Here is the summary with links:
- [net-next,v5,1/7] net: dsa: mt7530: empty default case on mt7530_setup_port5()
https://git.kernel.org/netdev/net-next/c/01fc42942e30
- [net-next,v5,2/7] net: dsa: mt7530: move XTAL check to mt7530_setup()
https://git.kernel.org/netdev/net-next/c/fd7929095a52
- [net-next,v5,3/7] net: dsa: mt7530: simplify mt7530_pad_clk_setup()
https://git.kernel.org/netdev/net-next/c/4eec447ef640
- [net-next,v5,4/7] net: dsa: mt7530: call port 6 setup from mt7530_mac_config()
https://git.kernel.org/netdev/net-next/c/4ea4c040ddc8
- [net-next,v5,5/7] net: dsa: mt7530: remove pad_setup function pointer
https://git.kernel.org/netdev/net-next/c/8c2703f55837
- [net-next,v5,6/7] net: dsa: mt7530: correct port capabilities of MT7988
https://git.kernel.org/netdev/net-next/c/c9d70a1d3d64
- [net-next,v5,7/7] net: dsa: mt7530: do not clear config->supported_interfaces
https://git.kernel.org/netdev/net-next/c/b43990bc552e
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html