Hi Linus, things are mostly normal. Sadly normal as so often means that
fixes for some regressions are out there, just not yet in mainline.
* A fix for "MXSFB error: -ENODEV: Cannot connect bridge"(*) appeared
in next-20240226 as d2f8795d9e50aa ("ARM: dts: imx7: remove DSI port
endpoints").
https://lore.kernel.org/lkml/34yzygh3mbwpqr2re7nxmhyxy3s7qmqy4vhxvoyxnoguktriur@z66m7gvpqlia/
* A fix for "sc7180 lazor: Image corruption regression for DP"(*)
appeared in next-20240227 as 0d7dfc79fb9b4b ("drm/msm/a6xx: specify UBWC
config for sc7180".
https://lore.kernel.org/regressions/85581fad-da8f-4550
[email protected]/
* A fix for warnings during suspend from a misc driver from Hans is
waiting for a review since 12 days.
https://lore.kernel.org/lkml/[email protected]/
https://lore.kernel.org/lkml/[email protected]/
A few other things of note:
* A lockdep splat in the stmmac code is not really making progress,
will prod tomorrow:
https://lore.kernel.org/lkml/[email protected]/
* Johan Hovold meanwhile continues a quest to fix various regressions
that affect the Lenovo ThinkPad X13s; some of the fixes have already
reached you, some are still under discussion.
* The list still includes the "decreased network outgoing performance
due to IRQ sharing that happened after a xhci change" I brought up a few
days ago; I'll remove that from the tracking, as you didn't reply.
Likewise for the 6.7 regression "user can't set the minimum power limit
of their Radeon graphic cards as low as before". For details, see:
https://lore.kernel.org/all/[email protected]/
* There are a kexec and a nouveau regression from this cycle that are
brand new.
Ciao, Thorsten
---
Hi, this is regzbot, the Linux kernel regression tracking bot.
Currently I'm aware of 8 regressions in linux-mainline. Find the
current status below and the latest on the web:
https://linux-regtracking.leemhuis.info/regzbot/mainline/
Bye bye, hope to see you soon for the next report.
Regzbot (on behalf of Thorsten Leemhuis)
======================================================
current cycle (v6.7.. aka v6.8-rc), culprit identified
======================================================
[ *NEW* ] x86/mm/ident_map: kexec now leads to reboot
-----------------------------------------------------
https://linux-regtracking.leemhuis.info/regzbot/regression/lore/[email protected]/
https://lore.kernel.org/stable/[email protected]/
By Pavin Joseph; 1 days ago; 9 activities, latest 0 days ago.
Introduced in d794734c9bbf (v6.8-rc5)
Recent activities from: Pavin Joseph (5), Linux regression tracking
(Thorsten Leemhuis) (2), Thorsten Leemhuis (1), Steve Wahl (1)
`lis3lv02d_i2c_suspend()` causes `unbalanced disables for regulator-dummy` and `Failed to disable Vdd_IO: -EIO`
---------------------------------------------------------------------------------------------------------------
https://linux-regtracking.leemhuis.info/regzbot/regression/lore/[email protected]/
https://lore.kernel.org/lkml/[email protected]/
By Paul Menzel; 30 days ago; 13 activities, latest 2 days ago.
Introduced in 2f189493ae32 (v6.8-rc1)
Recent activities from: Linux regression tracking (Thorsten
Leemhuis) (2), Paul Menzel (1)
Noteworthy links:
* [PATCH regression fix] misc: lis3lv02d_i2c: Fix regulators getting en-/dis-abled twice on suspend/resume
https://lore.kernel.org/lkml/[email protected]/
11 days ago, by Hans de Goede; thread monitored.
[ *NEW* ] drm/nouveau: rendering freezes with multi-GPU setup
-------------------------------------------------------------
https://linux-regtracking.leemhuis.info/regzbot/regression/lore/[email protected]/
https://lore.kernel.org/dri-devel/[email protected]/
By Sid Pranjale; 2 days ago; 1 activities, latest 2 days ago.
Introduced in 042b5f83841f (v6.8-rc4)
Recent activities from: Sid Pranjale (1)
One patch associated with this regression:
* [PATCH] drm/nouveau: keep DMA buffers required for suspend/resume
https://lore.kernel.org/dri-devel/[email protected]/
2 days ago, by Sid Pranjale
irq/net/usb: performance decrease now that network device and xhci share IRQs
-----------------------------------------------------------------------------
https://linux-regtracking.leemhuis.info/regzbot/regression/lore/CABXGCsNnUfCCYVSb_-j-a-cAdONu1r6Fe8p2OtQ5op_wskOfpw@mail.gmail.com/
https://lore.kernel.org/lkml/CABXGCsNnUfCCYVSb_-j-a-cAdONu1r6Fe8p2OtQ5op_wskOfpw@mail.gmail.com/
By Mikhail Gavrilov; 29 days ago; 29 activities, latest 3 days ago.
Introduced in f977f4c9301c (v6.8-rc1)
Recent activities from: mikhail.v.gavrilov (2), Thomas Gleixner (2),
Mathias Nyman (2), Mikhail Gavrilov (1), Linux regression tracking
(Thorsten Leemhuis) (1)
[ *NEW* ] Inconsistent lock state in stmmac code
------------------------------------------------
https://linux-regtracking.leemhuis.info/regzbot/regression/lore/[email protected]/
https://lore.kernel.org/lkml/[email protected]/
By Guenter Roeck; 20 days ago; 8 activities, latest 4 days ago.
Introduced in 38cc3c6dcc09 (v6.8-rc4)
Recent activities from: Petr Tesařík (1), Linux regression tracking
(Thorsten Leemhuis) (1), Alexis Lothoré (1)
[ *NEW* ] drm/msm: DisplayPort hard-reset on hotplug regression in 6.8-rc1
--------------------------------------------------------------------------
https://linux-regtracking.leemhuis.info/regzbot/regression/lore/[email protected]/
https://lore.kernel.org/lkml/[email protected]/
By Johan Hovold; 4 days ago; 1 activities, latest 4 days ago.
Introduced in 5814b8bf086a (v6.8-rc1)
Recent activities from: Johan Hovold (1)
[ *NEW* ] sc7180 lazor: Image corruption regression for DP with v6.8-rc4
------------------------------------------------------------------------
https://linux-regtracking.leemhuis.info/regzbot/regression/drm/msm/49/
https://gitlab.freedesktop.org/drm/msm/-/issues/49
https://lore.kernel.org/regressions/[email protected]/
By Leonard Lausen and Leonard Lausen; 20 days ago; 9 activities, latest 5 days ago.
Introduced in 8814455a0e54 (v6.8-rc1)
Fix incoming:
* drm/msm/a6xx: specify UBWC config for sc7180
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=master&id=0d7dfc79fb9b4b81f642f84796111f2bae8427e2
MXSFB error: -ENODEV: Cannot connect bridge
-------------------------------------------
https://linux-regtracking.leemhuis.info/regzbot/regression/lore/34yzygh3mbwpqr2re7nxmhyxy3s7qmqy4vhxvoyxnoguktriur@z66m7gvpqlia/
https://lore.kernel.org/lkml/34yzygh3mbwpqr2re7nxmhyxy3s7qmqy4vhxvoyxnoguktriur@z66m7gvpqlia/
https://lore.kernel.org/regressions/20240214110822.GA81133@francesco-nb/
By Hiago De Franco and Francesco Dolcini; 23 days ago; 8 activities, latest 6 days ago.
Introduced in edbbae7fba49 (v6.8-rc1)
Fix incoming:
* ARM: dts: imx7: remove DSI port endpoints
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=master&id=d2f8795d9e50aa33c1e2bc0fcbb98ba4a7795749
=============
End of report
=============
All regressions marked '[ *NEW* ]' were added since the previous report,
which can be found here:
https://lore.kernel.org/r/[email protected]
Thanks for your attention, have a nice day!
Regzbot, your hard working Linux kernel regression tracking robot
P.S.: Wanna know more about regzbot or how to use it to track regressions
for your subsystem? Then check out the getting started guide or the
reference documentation:
https://gitlab.com/knurd42/regzbot/-/blob/main/docs/getting_started.md
https://gitlab.com/knurd42/regzbot/-/blob/main/docs/reference.md
The short version: if you see a regression report you want to see
tracked, just send a reply to the report where you Cc
[email protected] with a line like this:
#regzbot introduced: v5.13..v5.14-rc1
If you want to fix a tracked regression, just do what is expected
anyway: add a 'Link:' tag with the url to the report, e.g.:
Link: https://lore.kernel.org/all/[email protected]/