2022-07-07 13:48:00

by Michael Walle

Subject: [PATCH v2 2/2] ARM: dts: kswitch-d10: enable the USB device port

Now that there is driver support for the USB device, enable it.

Signed-off-by: Michael Walle <[email protected]>
---
changes since v1:
- add pinctrl node, Thanks Claudiu

.../boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
index 5a6c5f7c371a..3eecaa1b7205 100644
--- a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
+++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
@@ -76,6 +76,12 @@ usart0_pins: usart0-pins {
pins = "GPIO_25", "GPIO_26";
function = "fc0_b";
};
+
+ usbs_a_pins: usbs-a-pins {
+ /* VBUS_DET */
+ pins = "GPIO_66";
+ function = "gpio";
+ };
};

&mdio0 {
@@ -200,6 +206,13 @@ &switch {
status = "okay";
};

+&udc {
+ pinctrl-0 = <&usbs_a_pins>;
+ pinctrl-names = "default";
+ atmel,vbus-gpio = <&gpio 66 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
&watchdog {
status = "okay";
};
--
2.30.2

2022-07-11 07:55:41

by Claudiu Beznea

Subject: Re: [PATCH v2 2/2] ARM: dts: kswitch-d10: enable the USB device port

On 07.07.2022 16:25, Michael Walle wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> Now that there is driver support for the USB device, enable it.
>
> Signed-off-by: Michael Walle <[email protected]>

Applied to at91-dt, thanks!

> ---
> changes since v1:
> - add pinctrl node, Thanks Claudiu
>
> .../boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
> index 5a6c5f7c371a..3eecaa1b7205 100644
> --- a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
> +++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
> @@ -76,6 +76,12 @@ usart0_pins: usart0-pins {
> pins = "GPIO_25", "GPIO_26";
> function = "fc0_b";
> };
> +
> + usbs_a_pins: usbs-a-pins {
> + /* VBUS_DET */
> + pins = "GPIO_66";
> + function = "gpio";
> + };
> };
>
> &mdio0 {
> @@ -200,6 +206,13 @@ &switch {
> status = "okay";
> };
>
> +&udc {
> + pinctrl-0 = <&usbs_a_pins>;
> + pinctrl-names = "default";
> + atmel,vbus-gpio = <&gpio 66 GPIO_ACTIVE_HIGH>;
> + status = "okay";
> +};
> +
> &watchdog {
> status = "okay";
> };
> --
> 2.30.2
>