The following changes since commit d206a76d7d2726f3b096037f2079ce0bd3ba329b:
Linux 6.8-rc6 (2024-02-25 15:46:06 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tags/tty-6.9-rc1
for you to fetch changes up to d6c0d892b44cd16e0421909cf7f2883b9e625e4a:
dt-bindings: serial: stm32: add power-domains property (2024-03-07 21:44:12 +0000)
----------------------------------------------------------------
TTY/Serial driver update for 6.9-rc1
Here is the big set of TTY/Serial driver updates and cleanups for
6.9-rc1. Included in here are:
- more tty cleanups from Jiri
- loads of 8250 driver cleanups from Andy
- max310x driver updates
- samsung serial driver updates
- uart_prepare_sysrq_char() updates for many drivers
- platform driver remove callback void cleanups
- stm32 driver updates
- other small tty/serial driver updates
All of these have been in linux-next for a long time with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
----------------------------------------------------------------
Andy Shevchenko (26):
serial: 8250_pci1xxxx: Don't use "proxy" headers
serial: 8250_bcm7271: Replace custom unit definitions
serial: 8250_of: Drop quirk fot NPCM from 8250_port
serial: 8250_exar: Don't remove GPIO device on suspend
serial: 8250_exar: Use dev_get_drvdata() directly in PM callbacks
serial: 8250_exar: Clear interrupts before registering handler
serial: 8250_exar: Use generic function to set firmware node
serial: 8250_exar: switch to DEFINE_SIMPLE_DEV_PM_OPS()
serial: 8250_exar: Use 8250 PCI library to map and assign resources
serial: 8250_exar: Don't use "proxy" headers
serial: 8250_pci1xxxx: Drop quirk from 8250_port
serial: core: Move struct uart_port::quirks closer to possible values
serial: core: Add UPIO_UNKNOWN constant for unknown port type
serial: port: Introduce a common helper to read properties
serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties()
serial: 8250_bcm2835aux: Switch to use uart_read_port_properties()
serial: 8250_bcm7271: Switch to use uart_read_port_properties()
serial: 8250_dw: Switch to use uart_read_port_properties()
serial: 8250_ingenic: Switch to use uart_read_port_properties()
serial: 8250_lpc18xx: Switch to use uart_read_port_properties()
serial: 8250_of: Switch to use uart_read_port_properties()
serial: 8250_omap: Switch to use uart_read_port_properties()
serial: 8250_pxa: Switch to use uart_read_port_properties()
serial: 8250_tegra: Switch to use uart_read_port_properties()
serial: 8250_uniphier: Switch to use uart_read_port_properties()
serial: 8250_dw: Replace ACPI device check by a quirk
Arnd Bergmann (1):
tty: hvc-iucv: fix function pointer casts
Bartosz Golaszewski (1):
serial: st-asc: don't get/put GPIOs in atomic context
Christoph Winklhofer (3):
dt-bindings: serial: allow onewire as child node
dt-bindings: w1: UART 1-Wire bus
w1: add UART w1 bus driver
Colin Ian King (2):
serial: lpc32xx_hs: remove redundant check and assignment of hsu_rate
tty: jsm: Remove redundant assignment to variable linestatus
Douglas Anderson (2):
soc: qcom: geni-se: Add M_TX_FIFO_NOT_EMPTY bit definition
serial: qcom-geni: Don't cancel/abort if we can't get the port lock
Francesco Dolcini (1):
treewide, serdev: change receive_buf() return type to size_t
Geert Uytterhoeven (3):
serial: 8250: Move hp300_setup_serial_console() to <linux/serial_8250.h>
serial: txx9: Add missing #include <asm/txx9/generic.h>
serial: sh-sci: Call sci_serial_{in,out}() directly
Greg Kroah-Hartman (4):
Merge 6.8-rc3 into tty-next
Merge 6.8-rc5 into tty-next
Merge 6.8-rc6 into tty-next
Merge tag 'w1-drv-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1 into tty-next
Hugo Villeneuve (17):
serial: max310x: fix NULL pointer dereference in I2C instantiation
serial: max310x: add I2C device table for instantiation from userspace
serial: max310x: use i2c_get_match_data()
serial: max310x: use spi_get_device_match_data()
serial: max310x: fix syntax error in IRQ error message
serial: max310x: remove holes in struct max310x_devtype
serial: max310x: add macro for max number of ports
serial: max310x: use separate regmap name for each port
serial: max310x: simplify probe() and remove() error handling
serial: max310x: add explicit return for some switch default cases
serial: max310x: use dev_err_probe() instead of dev_err()
serial: max310x: replace hardcoded masks with preferred GENMASK()
serial: max310x: use common detect function for all variants
serial: max310x: use common power function for all variants
serial: max310x: replace bare use of 'unsigned' with 'unsigned int' (checkpatch)
serial: max310x: reformat and improve comments
serial: max310x: fix indentation
Ilpo Järvinen (1):
tty: Don't include tty_buffer.h in tty.h
Jiri Slaby (SUSE) (69):
vgacon: inline vc_scrolldelta_helper() into vgacon_scrolldelta()
fbcon: make display_desc a static array in fbcon_startup()
tty: vt: fix 20 vs 0x20 typo in EScsiignore
tty: vt: expect valid vc when in tty ops
tty: vt: pass proper pointers from tioclinux()
tty: vt: push console lock from tioclinux() down to 2 functions
tty: vt: pass vc_resize_user as a parameter
tty: vt: make vc_is_sel()'s vc const
tty: vt: define an enum for CSI+m codes
tty: vt: use case ranges for CSI+m fg/bg colors
tty: vt: define an enum for CSI+J codes
tty: vt: reflow csi_J()
use clamp() for counts in csi_?() handlers
don't pass vc->vc_par[0] to csi_?() handlers
tty: vt: define an enum for CSI+K codes
tty: vt: reflow csi_K()
tty: vt: define an enum for ascii characters
tty: vt: remove extern from functions in selection.h
tty: vt: make consw::con_debug_*() return void
tty: vt: make init parameter of consw::con_init() a bool
tty: vt: sanitize arguments of consw::con_clear()
tty: vt: remove checks for count in consw::con_clear() implementations
tty: vt: add con_putc() helper
tty: vt: eliminate unneeded consw::con_putc() implementations
tty: vt: sanitize consw::con_putc() parameters
tty: vt: sanitize consw::con_putcs() parameters
consoles: use if instead of switch-case in consw::con_cursor()
fbdev/core: simplify cursor_state setting in fbcon_ops::cursor()
tty: vt: remove CM_* constants
tty: vt: make consw::con_switch() return a bool
tty: vt: stop using -1 for blank mode in consw::con_blank()
tty: vt: define a common enum for VESA blanking constants
tty: vt: use VESA blanking constants
tty: vt: use enum constants for VESA blanking modes
tty: vt: make types around consw::con_blank() bool
tty: vt: make font of consw::con_font_set() const
tty: vt: make consw::con_font_default()'s name const
tty: vt: change consw::con_set_origin() return type
fbcon: remove consw::con_screen_pos()
tty: vt: remove consw::con_screen_pos()
tty: vt: make types of screenpos() more consistent
fbcon: remove fbcon_getxy()
tty: vt: remove consw::con_getxy()
tty: vt: remove unused consw::con_flush_scrollback()
tty: vt: document the rest of struct consw
tty: vt: fix up kernel-doc
Documentation: add console.rst
tty: vt: make rgb_from_256() slighly more comprehensible
tty: vt: define enums for CSI+h/l codes
tty: vt: rename set_mode() to csi_hl()
tty: vt: split DEC CSI+h/l handling into csi_DEC_hl()
tty: vt: remove unneeded assignment of EPecma to vc_priv
tty: vt: move CSI+n handling along to other ECMA CSIs
tty: vt: define an enum for CSI+] codes
tty: vt: rename setterm_command() to csi_RSB()
tty: vt: put cases on separate lines
tty: vt: accept u8 in do_con_trol() and vc_setGx()
tty: vt: extract ascii handling to handle_ascii()
tty: vt: separate ESesc state handling into handle_esc()
tty: vt: move CSI DEC handling to a separate function
tty: vt: move CSI ECMA handling to a separate function
tty: vt: name, reflow and document enum vc_ctl_state
tty: vt: simplify ansi_control_string()
tty: vt: handle CSI+[ inside preexisting switch-case
tty: vt: add new helper for reseting vc parameters
tty: vt: use switch+case in the ESnonstd case
tty: vt: use switch+case in the ESgetpars case
tty: vt: use ASCII enum constants in vt_console_print()
tty: vt: decrypt magic constants in vc_is_control()
Jonas Gorski (1):
serial: core: only stop transmit when HW fifo is empty
Konrad Dybcio (2):
tty: serial: amba-pl011: Remove QDF2xxx workarounds
Revert "tty: serial: amba-pl011: Remove QDF2xxx workarounds"
Lizhe (1):
serial: linflexuart: Remove redundant uart type assignment
Lukas Bulwahn (1):
vt: remove superfluous CONFIG_HW_CONSOLE
Manikanta Guntupalli (3):
dt-bindings: Add reference to rs485.yaml
tty: serial: uartps: Relocate cdns_uart_tx_empty to facilitate rs485
tty: serial: uartps: Add rs485 support to uartps driver
Nghia Nguyen (1):
dt-bindings: serial: renesas,hscif: Document r8a779h0 bindings
Peng Fan (1):
dt-bindings: serial: fsl-lpuart: support i.MX95
Peter Collingbourne (1):
serial: Lock console when calling into driver before registration
Raphael Gallais-Pou (1):
dt-bindings: serial: convert st,asc to DT schema
Rengarajan S (2):
8250: microchip: pci1xxxx: Add Burst mode transmission support in uart driver for reading from FIFO
8250: microchip: Add 4 Mbps support in PCI1XXXX UART
Ricardo B. Marliere (3):
serdev: make serdev_bus_type const
serial: core: make serial_base_bus_type const
w1: make w1_bus_type const
Roman Žilka (2):
tty/vt: UTF-8 parsing update according to RFC 3629, modern Unicode
tty/vt: Corrected doc of vc_sanitize_unicode(), vc_translate_unicode()
Sam Protsenko (1):
tty: serial: samsung: Remove superfluous braces in macro
Sebastian Andrzej Siewior (18):
serial: amba-pl011: Use uart_prepare_sysrq_char().
serial: ar933x: Use uart_prepare_sysrq_char().
serial: bcm63xx: Use uart_prepare_sysrq_char().
serial: meson: Use uart_prepare_sysrq_char().
serial: msm: Use uart_prepare_sysrq_char().
serial: omap: Use uart_prepare_sysrq_char().
serial: pxa: Use uart_prepare_sysrq_char().
serial: sunplus: Use uart_prepare_sysrq_char().
serial: lpc32xx_hs: Use uart_prepare_sysrq_char() to handle sysrq.
serial: owl: Use uart_prepare_sysrq_char() to handle sysrq.
serial: rda: Use uart_prepare_sysrq_char() to handle sysrq.
serial: sifive: Use uart_prepare_sysrq_char() to handle sysrq.
serial: pch: Invoke handle_rx_to() directly.
serial: pch: Make push_rx() return void.
serial: pch: Don't disable interrupts while acquiring lock in ISR.
serial: pch: Don't initialize uart_port's spin_lock.
serial: pch: Remove eg20t_port::lock.
serial: pch: Use uart_prepare_sysrq_char().
Serge Semin (1):
serial: 8250: Use serial8250_do_set_termios for uartclk updating
Tamseel Shams (1):
serial: samsung: honor fifosize from dts at first
Thomas Huth (1):
drivers/tty/serial: Remove unused function early_mcf_setup
Tudor Ambarus (19):
tty: serial: samsung: fix tx_empty() to return TIOCSER_TEMT
dt-bindings: serial: samsung: do not allow reg-io-width for gs101
tty: serial: samsung: prepare for different IO types
tty: serial: samsung: set UPIO_MEM32 iotype for gs101
tty: serial: samsung: add gs101 earlycon support
tty: serial: samsung: sort headers alphabetically
tty: serial: samsung: explicitly include <linux/types.h>
tty: serial: samsung: use u32 for register interactions
tty: serial: samsung: remove braces on single statement block
tty: serial: samsung: move open brace '{' on the next line
tty: serial: samsung: drop superfluous comment
tty: serial: samsung: make max_count unsigned int
tty: serial: samsung: don't compare with zero an if (bitwise expression)
tty: serial: samsung: return bool for s3c24xx_serial_txempty_nofifo()
tty: serial: samsung: return bool for s3c24xx_serial_console_txrdy()
tty: serial: samsung: change return type for s3c24xx_serial_rx_fifocnt()
tty: serial: samsung: shrink the clock selection to 8 clocks
tty: serial: samsung: change has_divslot type to bool
tty: serial: samsung: shrink memory footprint of ``struct s3c24xx_uart_info``
Uwe Kleine-König (8):
tty: amiserial: Convert to platform remove callback returning void
tty: goldfish: Convert to platform remove callback returning void
serial: pmac_zilog: Convert to platform remove callback returning void
w1: mxc_w1: Convert to platform remove callback returning void
w1: omap_hdq: Convert to platform remove callback returning void
w1: sgi_w1: Convert to platform remove callback returning void
w1: w1-gpio: Convert to platform remove callback returning void
serial: 8250_dw: Emit an error message if getting the baudclk failed
Valentin Caron (5):
serial: stm32: implement prescaler tuning to compute low baudrate
serial: stm32: extend max number of U(S)ART to 9
serial: stm32: change register's offset type from u8 to u16
serial: stm32: get FIFO size from hwcfg register
dt-bindings: serial: stm32: add power-domains property
.../devicetree/bindings/serial/cdns,uart.yaml | 1 +
.../devicetree/bindings/serial/fsl-lpuart.yaml | 1 +
.../devicetree/bindings/serial/renesas,hscif.yaml | 1 +
.../devicetree/bindings/serial/samsung_uart.yaml | 2 +
.../devicetree/bindings/serial/serial.yaml | 2 +-
.../devicetree/bindings/serial/st,asc.yaml | 55 +
.../devicetree/bindings/serial/st,stm32-uart.yaml | 3 +
.../devicetree/bindings/serial/st-asc.txt | 18 -
Documentation/devicetree/bindings/w1/w1-uart.yaml | 59 +
Documentation/driver-api/tty/console.rst | 45 +
Documentation/driver-api/tty/index.rst | 1 +
Documentation/w1/masters/index.rst | 1 +
Documentation/w1/masters/w1-uart.rst | 54 +
arch/m68k/amiga/config.c | 2 +-
arch/m68k/hp300/config.c | 6 +-
drivers/bluetooth/btmtkuart.c | 4 +-
drivers/bluetooth/btnxpuart.c | 4 +-
drivers/bluetooth/hci_serdev.c | 4 +-
drivers/gnss/serial.c | 2 +-
drivers/gnss/sirf.c | 2 +-
drivers/greybus/gb-beagleplay.c | 6 +-
drivers/iio/chemical/pms7003.c | 4 +-
drivers/iio/chemical/scd30_serial.c | 4 +-
drivers/iio/chemical/sps30_serial.c | 4 +-
drivers/iio/imu/bno055/bno055_ser_core.c | 4 +-
drivers/input/keyboard/amikbd.c | 6 +-
drivers/mfd/rave-sp.c | 4 +-
drivers/net/ethernet/qualcomm/qca_uart.c | 2 +-
drivers/nfc/pn533/uart.c | 4 +-
drivers/nfc/s3fwrn5/uart.c | 4 +-
drivers/platform/chrome/cros_ec_uart.c | 4 +-
drivers/platform/surface/aggregator/core.c | 4 +-
drivers/tty/Kconfig | 7 +-
drivers/tty/amiserial.c | 6 +-
drivers/tty/goldfish.c | 5 +-
drivers/tty/hvc/hvc_iucv.c | 6 +-
drivers/tty/serdev/core.c | 2 +-
drivers/tty/serdev/serdev-ttyport.c | 10 +-
drivers/tty/serial/8250/8250_aspeed_vuart.c | 50 +-
drivers/tty/serial/8250/8250_bcm2835aux.c | 92 +-
drivers/tty/serial/8250/8250_bcm7271.c | 73 +-
drivers/tty/serial/8250/8250_dw.c | 121 +-
drivers/tty/serial/8250/8250_exar.c | 52 +-
drivers/tty/serial/8250/8250_ingenic.c | 20 +-
drivers/tty/serial/8250/8250_lpc18xx.c | 20 +-
drivers/tty/serial/8250/8250_of.c | 149 +-
drivers/tty/serial/8250/8250_omap.c | 29 +-
drivers/tty/serial/8250/8250_pci1xxxx.c | 175 ++-
drivers/tty/serial/8250/8250_port.c | 50 +-
drivers/tty/serial/8250/8250_pxa.c | 22 +-
drivers/tty/serial/8250/8250_tegra.c | 26 +-
drivers/tty/serial/8250/8250_uniphier.c | 17 +-
drivers/tty/serial/8250/Kconfig | 1 +
drivers/tty/serial/amba-pl011.c | 24 +-
drivers/tty/serial/ar933x_uart.c | 18 +-
drivers/tty/serial/bcm63xx_uart.c | 24 +-
drivers/tty/serial/fsl_linflexuart.c | 1 -
drivers/tty/serial/jsm/jsm_cls.c | 1 -
drivers/tty/serial/lpc32xx_hs.c | 19 +-
drivers/tty/serial/max310x.c | 327 ++---
drivers/tty/serial/mcf.c | 27 -
drivers/tty/serial/meson_uart.c | 22 +-
drivers/tty/serial/msm_serial.c | 33 +-
drivers/tty/serial/omap-serial.c | 16 +-
drivers/tty/serial/owl-uart.c | 30 +-
drivers/tty/serial/pch_uart.c | 70 +-
drivers/tty/serial/pmac_zilog.c | 9 +-
drivers/tty/serial/pxa.c | 17 +-
drivers/tty/serial/qcom_geni_serial.c | 27 +-
drivers/tty/serial/rda-uart.c | 28 +-
drivers/tty/serial/samsung_tty.c | 276 ++--
drivers/tty/serial/serial_base_bus.c | 2 +-
drivers/tty/serial/serial_core.c | 12 +
drivers/tty/serial/serial_port.c | 145 ++
drivers/tty/serial/serial_txx9.c | 3 +-
drivers/tty/serial/sh-sci.c | 245 ++--
drivers/tty/serial/sifive.c | 17 +-
drivers/tty/serial/st-asc.c | 40 +-
drivers/tty/serial/stm32-usart.c | 223 +--
drivers/tty/serial/stm32-usart.h | 38 +-
drivers/tty/serial/sunplus-uart.c | 18 +-
drivers/tty/serial/xilinx_uartps.c | 236 ++-
drivers/tty/tty_buffer.c | 1 +
drivers/tty/vt/Makefile | 4 +-
drivers/tty/vt/selection.c | 43 +-
drivers/tty/vt/vt.c | 1531 +++++++++++---------
drivers/tty/vt/vt_ioctl.c | 6 +-
drivers/video/console/dummycon.c | 38 +-
drivers/video/console/mdacon.c | 43 +-
drivers/video/console/newport_con.c | 69 +-
drivers/video/console/sticon.c | 79 +-
drivers/video/console/vgacon.c | 152 +-
drivers/video/fbdev/core/bitblit.c | 13 +-
drivers/video/fbdev/core/fbcon.c | 123 +-
drivers/video/fbdev/core/fbcon.h | 4 +-
drivers/video/fbdev/core/fbcon_ccw.c | 13 +-
drivers/video/fbdev/core/fbcon_cw.c | 13 +-
drivers/video/fbdev/core/fbcon_ud.c | 13 +-
drivers/video/fbdev/core/tileblit.c | 4 +-
drivers/video/fbdev/tgafb.c | 2 +-
drivers/w1/masters/Kconfig | 10 +
drivers/w1/masters/Makefile | 1 +
drivers/w1/masters/mxc_w1.c | 6 +-
drivers/w1/masters/omap_hdq.c | 6 +-
drivers/w1/masters/sgi_w1.c | 6 +-
drivers/w1/masters/w1-gpio.c | 6 +-
drivers/w1/masters/w1-uart.c | 415 ++++++
drivers/w1/w1.c | 2 +-
include/linux/console.h | 126 +-
include/linux/console_struct.h | 1 -
include/linux/selection.h | 48 +-
include/linux/serdev.h | 8 +-
include/linux/serial_8250.h | 6 +
include/linux/serial_core.h | 14 +-
include/linux/soc/qcom/geni-se.h | 1 +
include/linux/tty.h | 1 -
include/linux/vt_kern.h | 12 +-
include/uapi/linux/fb.h | 8 +-
include/uapi/linux/vesa.h | 18 +
kernel/printk/printk.c | 21 +-
lib/Kconfig.kgdb | 2 +-
sound/drivers/serial-generic.c | 4 +-
122 files changed, 3546 insertions(+), 2525 deletions(-)
create mode 100644 Documentation/devicetree/bindings/serial/st,asc.yaml
delete mode 100644 Documentation/devicetree/bindings/serial/st-asc.txt
create mode 100644 Documentation/devicetree/bindings/w1/w1-uart.yaml
create mode 100644 Documentation/driver-api/tty/console.rst
create mode 100644 Documentation/w1/masters/w1-uart.rst
create mode 100644 drivers/w1/masters/w1-uart.c
create mode 100644 include/uapi/linux/vesa.h
The pull request you sent on Thu, 21 Mar 2024 14:01:08 +0100:
> git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tags/tty-6.9-rc1
has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/3bcb0bf65c2b8d67dbe7509da8d1461ee4445db7
Thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/prtracker.html