2024-03-15 22:54:36

by Sebastian Raase

[permalink] [raw]
Subject: [PATCH] arm64: dts: qcom: msm8998-yoshino: fix volume-up key

The volume-up key is connected to gpio6 on yoshino.
Fix button node ordering while at it.
Disable pm8998_resin, since it is now unused.

Tested on maple and lilac.

Fixes: 390883af89d2e ("arm64: dts: qcom: msm8998: Introduce support for Sony Yoshino platform")
Signed-off-by: Sebastian Raase <[email protected]>
---
.../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 44 +++++++++++--------
1 file changed, 26 insertions(+), 18 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
index 876c6921ddf0..fdd3953938d9 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -98,30 +98,35 @@ extcon_usb: extcon-usb {
gpio-keys {
compatible = "gpio-keys";
label = "Side buttons";
+ pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &vol_up_n>;
pinctrl-names = "default";
- pinctrl-0 = <&vol_down_n &focus_n &snapshot_n>;
- button-vol-down {
- label = "Volume Down";
- gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
- linux,input-type = <EV_KEY>;
- linux,code = <KEY_VOLUMEDOWN>;
- wakeup-source;
+ button-camera-focus {
+ label = "Camera Focus";
+ gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_CAMERA_FOCUS>;
debounce-interval = <15>;
};

button-camera-snapshot {
label = "Camera Snapshot";
gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>;
- linux,input-type = <EV_KEY>;
linux,code = <KEY_CAMERA>;
debounce-interval = <15>;
};

- button-camera-focus {
- label = "Camera Focus";
- gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>;
- linux,input-type = <EV_KEY>;
- linux,code = <KEY_CAMERA_FOCUS>;
+ button-vol-down {
+ label = "Volume Down";
+ gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+
+ button-vol-up {
+ label = "Volume Up";
+ gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
debounce-interval = <15>;
};
};
@@ -345,6 +350,14 @@ vol_down_n: vol-down-n-state {
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
};

+ vol_up_n: vol-up-n-state {
+ pins = "gpio6";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ bias-pull-up;
+ input-enable;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ };
+
focus_n: focus-n-state {
pins = "gpio7";
function = PMIC_GPIO_FUNC_NORMAL;
@@ -405,11 +418,6 @@ vib_ldo_en: vib-ldo-en-state {
};
};

-&pm8998_resin {
- linux,code = <KEY_VOLUMEUP>;
- status = "okay";
-};
-
&qusb2phy {
status = "okay";

--
2.42.0



2024-03-16 12:08:22

by Konrad Dybcio

[permalink] [raw]
Subject: Re: [PATCH] arm64: dts: qcom: msm8998-yoshino: fix volume-up key

On 15.03.2024 23:52, Sebastian Raase wrote:
> The volume-up key is connected to gpio6 on yoshino.
> Fix button node ordering while at it.
> Disable pm8998_resin, since it is now unused.
>
> Tested on maple and lilac.
>
> Fixes: 390883af89d2e ("arm64: dts: qcom: msm8998: Introduce support for Sony Yoshino platform")
> Signed-off-by: Sebastian Raase <[email protected]>
> ---

Reviewed-by: Konrad Dybcio <[email protected]>

Konrad

2024-04-04 21:26:08

by Bjorn Andersson

[permalink] [raw]
Subject: Re: [PATCH] arm64: dts: qcom: msm8998-yoshino: fix volume-up key


On Fri, 15 Mar 2024 23:52:29 +0100, Sebastian Raase wrote:
> The volume-up key is connected to gpio6 on yoshino.
> Fix button node ordering while at it.
> Disable pm8998_resin, since it is now unused.
>
> Tested on maple and lilac.
>
>
> [...]

Applied, thanks!

[1/1] arm64: dts: qcom: msm8998-yoshino: fix volume-up key
commit: 83ef6a5afc1d5e2270797a164972a3de3bd2ea52

Best regards,
--
Bjorn Andersson <[email protected]>