2024-04-05 21:40:15

by Jerry Snitselaar

Subject: [PATCH v2] dmaengine: idxd: Check for driver name match before sva user feature

Currently if the user driver is probed on a workqueue configured for
another driver with SVA not enabled on the system, it will print
out a number of probe failing messages like the following:

[ 264.831140] user: probe of wq13.0 failed with error -95

On some systems, such as GNR, the number of messages can
reach over 100.

Move the SVA feature check to be after the driver name match
check.

Cc: Vinod Koul <[email protected]>
Cc: [email protected]
Cc: [email protected]
Reviewed-by: Fenghua Yu <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
Signed-off-by: Jerry Snitselaar <[email protected]>
---
v2:
- Fix typo.
- Add Reviewed-by tags for Dave and Fenghua

drivers/dma/idxd/cdev.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/dma/idxd/cdev.c b/drivers/dma/idxd/cdev.c
index 8078ab9acfbc..a4b771781afc 100644
--- a/drivers/dma/idxd/cdev.c
+++ b/drivers/dma/idxd/cdev.c
@@ -517,6 +517,14 @@ static int idxd_user_drv_probe(struct idxd_dev *idxd_dev)
if (idxd->state != IDXD_DEV_ENABLED)
return -ENXIO;

+ mutex_lock(&wq->wq_lock);
+
+ if (!idxd_wq_driver_name_match(wq, dev)) {
+ idxd->cmd_status = IDXD_SCMD_WQ_NO_DRV_NAME;
+ rc = -ENODEV;
+ goto wq_err;
+ }
+
/*
* User type WQ is enabled only when SVA is enabled for two reasons:
* - If no IOMMU or IOMMU Passthrough without SVA, userspace
@@ -532,14 +540,7 @@ static int idxd_user_drv_probe(struct idxd_dev *idxd_dev)
dev_dbg(&idxd->pdev->dev,
"User type WQ cannot be enabled without SVA.\n");

- return -EOPNOTSUPP;
- }
-
- mutex_lock(&wq->wq_lock);
-
- if (!idxd_wq_driver_name_match(wq, dev)) {
- idxd->cmd_status = IDXD_SCMD_WQ_NO_DRV_NAME;
- rc = -ENODEV;
+ rc = -EOPNOTSUPP;
goto wq_err;
}

--
2.44.0

2024-04-07 16:40:24

by Vinod Koul

Subject: Re: [PATCH v2] dmaengine: idxd: Check for driver name match before sva user feature

On Fri, 05 Apr 2024 14:39:41 -0700, Jerry Snitselaar wrote:
> Currently if the user driver is probed on a workqueue configured for
> another driver with SVA not enabled on the system, it will print
> out a number of probe failing messages like the following:
>
> [ 264.831140] user: probe of wq13.0 failed with error -95
>
> On some systems, such as GNR, the number of messages can
> reach over 100.
>
> [...]

Applied, thanks!

[1/1] dmaengine: idxd: Check for driver name match before sva user feature
commit: c863062cf8250d8330859fc1d730b2aed3313bcd

Best regards,
--
~Vinod