This series performs various improvements and enables PHYs and USB Role
Switching for proper PM support and to stop relying on the bootloader's
pre-boot configuration.
USB Role Switching doesn't include Alternate Modes yet, as this needs
some more work.
As for the regulator nodes, those were not probing correctly, producing
unability to resume after PM suspend.
AngeloGioacchino Del Regno (5):
arm64: dts: mediatek: mt8395-nio-12l: Fix MT6360 regulator nodes names
arm64: dts: medaitek: mt8395-nio-12l: Set i2c6 pins to bias-disable
arm64: dts: mediatek: mt8395-nio-12l: Define RSEL in microamperes
arm64: dts: mediatek: mt8395-nio-12l: Enable PHYs and USB role switch
arm64: dts: mediatek: mt8395-nio-12l: Add power supplies for CPU/GPU
scaling
.../dts/mediatek/mt8395-radxa-nio-12l.dts | 106 ++++++++++++++++--
1 file changed, 94 insertions(+), 12 deletions(-)
--
2.44.0
On Tue, 09 Apr 2024 13:42:06 +0200, AngeloGioacchino Del Regno wrote:
> This series performs various improvements and enables PHYs and USB Role
> Switching for proper PM support and to stop relying on the bootloader's
> pre-boot configuration.
> USB Role Switching doesn't include Alternate Modes yet, as this needs
> some more work.
>
> As for the regulator nodes, those were not probing correctly, producing
> unability to resume after PM suspend.
>
> AngeloGioacchino Del Regno (5):
> arm64: dts: mediatek: mt8395-nio-12l: Fix MT6360 regulator nodes names
> arm64: dts: medaitek: mt8395-nio-12l: Set i2c6 pins to bias-disable
> arm64: dts: mediatek: mt8395-nio-12l: Define RSEL in microamperes
> arm64: dts: mediatek: mt8395-nio-12l: Enable PHYs and USB role switch
> arm64: dts: mediatek: mt8395-nio-12l: Add power supplies for CPU/GPU
> scaling
>
> .../dts/mediatek/mt8395-radxa-nio-12l.dts | 106 ++++++++++++++++--
> 1 file changed, 94 insertions(+), 12 deletions(-)
>
> --
> 2.44.0
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
New warnings running 'make CHECK_DTBS=y mediatek/mt8395-radxa-nio-12l.dtb' for [email protected]:
arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dtb: soc: jpgdec-master: {'compatible': ['mediatek,mt8195-jpgdec'], 'power-domains': [[47, 24]], 'iommus': [[137, 621], [137, 622], [137, 626], [137, 627], [137, 628], [137, 629]], '#address-cells': [[2]], '#size-cells': [[2]], 'ranges': True, 'jpgdec@1a040000': {'compatible': ['mediatek,mt8195-jpgdec-hw'], 'reg': [[0, 436469760, 0, 65536]], 'iommus': [[137, 621], [137, 622], [137, 626], [137, 627], [137, 628], [137, 629]], 'interrupts': [[0, 343, 4, 0]], 'clocks': [[38, 3]], 'clock-names': ['jpgdec'], 'power-domains': [[47, 23]]}, 'jpgdec@1a050000': {'compatible': ['mediatek,mt8195-jpgdec-hw'], 'reg': [[0, 436535296, 0, 65536]], 'iommus': [[137, 621], [137, 622], [137, 626], [137, 627], [137, 628], [137, 629]], 'interrupts': [[0, 344, 4, 0]], 'clocks': [[38, 4]], 'clock-names': ['jpgdec'], 'power-domains': [[47, 24]]}, 'jpgdec@1b040000': {'compatible': ['mediatek,mt8195-jpgdec-hw'], 'reg': [[0, 453246976, 0, 65536]], 'iommus': [[119,
653], [119, 654], [119, 658], [119, 659], [119, 660], [119, 661]], 'interrupts': [[0, 348, 4, 0]], 'clocks': [[32, 3]], 'clock-names': ['jpgdec'], 'power-domains': [[47, 25]]}} should not be valid under {'type': 'object'}
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dtb: soc: jpgenc-master: {'compatible': ['mediatek,mt8195-jpgenc'], 'power-domains': [[47, 27]], 'iommus': [[119, 647], [119, 648], [119, 649], [119, 652]], '#address-cells': [[2]], '#size-cells': [[2]], 'ranges': True, 'jpgenc@1a030000': {'compatible': ['mediatek,mt8195-jpgenc-hw'], 'reg': [[0, 436404224, 0, 65536]], 'iommus': [[137, 615], [137, 616], [137, 617], [137, 620]], 'interrupts': [[0, 342, 4, 0]], 'clocks': [[38, 2]], 'clock-names': ['jpgenc'], 'power-domains': [[47, 26]]}, 'jpgenc@1b030000': {'compatible': ['mediatek,mt8195-jpgenc-hw'], 'reg': [[0, 453181440, 0, 65536]], 'iommus': [[119, 647], [119, 648], [119, 649], [119, 652]], 'interrupts': [[0, 347, 4, 0]], 'clocks': [[32, 2]], 'clock-names': ['jpgenc'], 'power-domains': [[47, 27]]}} should not be valid under {'type': 'object'}
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dtb: pmic@34: charger: 'usb-otg-vbus' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/mfd/mediatek,mt6360.yaml#
arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dtb: charger: 'usb-otg-vbus' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/power/supply/mt6360_charger.yaml#
arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dtb: regulator: 'BUCK1', 'BUCK2', 'LDO1', 'LDO2', 'LDO3', 'LDO5', 'LDO6', 'LDO7' do not match any of the regexes: '^buck[12]$', '^ldo[123567]$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/regulator/mt6360-regulator.yaml#
arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dtb: display@14f06000: clocks: [[34, 14], [34, 43], [34, 44]] is too long
from schema $id: http://devicetree.org/schemas/display/mediatek/mediatek,split.yaml#