Define the USB-C orientation GPIOs so that the USB-C ports orientation
is known without having to resort to the altmode notifications.
On PCB level this is the signal from PM7250B (pin CC_OUT) which is
called USB_PHY_PS.
Signed-off-by: Luca Weiss <[email protected]>
---
Depends on (for bindings): https://lore.kernel.org/linux-arm-msm/[email protected]/
---
arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
index 4ff9fc24e50e..f3432701945f 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
@@ -77,6 +77,8 @@ pmic-glink {
#address-cells = <1>;
#size-cells = <0>;
+ orientation-gpios = <&tlmm 140 GPIO_ACTIVE_HIGH>;
+
connector@0 {
compatible = "usb-c-connector";
reg = <0>;
---
base-commit: 65b0418f6e86eef0f62fc053fb3622fbaa3e506e
change-id: 20240411-fp5-usb-c-gpio-afd22741adcd
Best regards,
--
Luca Weiss <[email protected]>
On Thu, 11 Apr 2024 09:06:11 +0200, Luca Weiss wrote:
> Define the USB-C orientation GPIOs so that the USB-C ports orientation
> is known without having to resort to the altmode notifications.
>
> On PCB level this is the signal from PM7250B (pin CC_OUT) which is
> called USB_PHY_PS.
>
>
> [...]
Applied, thanks!
[1/1] arm64: dts: qcom: qcm6490-fairphone-fp5: Add USB-C orientation GPIO
commit: e788ef2bdac7fdbd61b626f65fdf7528a1c6fd3b
Best regards,
--
Bjorn Andersson <[email protected]>