Hello,
This series adds initial support for the Marvell PXA1908 SoC and
"samsung,coreprimevelte", a smartphone using the SoC.
USB works and the phone can boot a rootfs from an SD card, but there are
some warnings in the dmesg:
During SMP initialization:
[ 0.006519] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU1: 0x00000000000000
[ 0.006542] CPU features: Unsupported CPU feature variation detected.
[ 0.006589] CPU1: Booted secondary processor 0x0000000001 [0x410fd032]
[ 0.010710] Detected VIPT I-cache on CPU2
[ 0.010716] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU2: 0x00000000000000
[ 0.010758] CPU2: Booted secondary processor 0x0000000002 [0x410fd032]
[ 0.014849] Detected VIPT I-cache on CPU3
[ 0.014855] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU3: 0x00000000000000
[ 0.014895] CPU3: Booted secondary processor 0x0000000003 [0x410fd032]
SMMU probing fails:
[ 0.101798] arm-smmu c0010000.iommu: probing hardware configuration...
[ 0.101809] arm-smmu c0010000.iommu: SMMUv1 with:
[ 0.101816] arm-smmu c0010000.iommu: no translation support!
A 3.14 based Marvell tree is available on GitHub
acorn-marvell/brillo_pxa_kernel, and a Samsung one on GitHub
CoderCharmander/g361f-kernel.
Andreas Färber attempted to upstream support for this SoC in 2017:
https://lore.kernel.org/lkml/[email protected]/
Signed-off-by: Duje Mihanović <[email protected]>
Changes in v10:
- Update trailers
- Rebase on v6.9-rc5
- Clock driver changes:
- Add a couple of forgotten clocks in APBC
- The clocks are thermal_clk, ipc_clk, ssp0_clk, ssp2_clk and swjtag
- The IDs and register offsets were already present, but I forgot to
actually register them
- Split each controller block into own file
- Drop unneeded -of in clock driver filenames
- Simplify struct pxa1908_clk_unit
- Convert to platform driver
- Add module metadata
- DTS changes:
- Properly name pinctrl nodes
- Drop pinctrl #size-cells, #address-cells, ranges and #gpio-size-cells
- Fix pinctrl input-schmitt configuration
- Link to v9: https://lore.kernel.org/[email protected]
Changes in v9:
- Update trailers and rebase on v6.9-rc2, no changes
- Link to v8: https://lore.kernel.org/[email protected]
Changes in v8:
- Drop SSPA patch
- Drop broken-cd from eMMC node
- Specify S-Boot hardcoded initramfs location in device tree
- Add ARM PMU node
- Correct inverted modem memory base and size
- Update trailers
- Rebase on next-20240110
- Link to v7: https://lore.kernel.org/[email protected]
and https://lore.kernel.org/[email protected]
Changes in v7:
- Suppress SND_MMP_SOC_SSPA on ARM64
- Update trailers
- Rebase on v6.6-rc7
- Link to v6: https://lore.kernel.org/r/[email protected]
Changes in v6:
- Address maintainer comments:
- Add "marvell,pxa1908-padconf" binding to pinctrl-single driver
- Drop GPIO patch as it's been pulled
- Update trailers
- Rebase on v6.6-rc5
- Link to v5: https://lore.kernel.org/r/[email protected]
Changes in v5:
- Address maintainer comments:
- Move *_NR_CLKS to clock driver from dt binding file
- Allocate correct number of clocks for each block instead of blindly
allocating 50 for each
- Link to v4: https://lore.kernel.org/r/[email protected]
Changes in v4:
- Address maintainer comments:
- Relicense clock binding file to BSD-2
- Add pinctrl-names to SD card node
- Add vgic registers to GIC node
- Rebase on v6.5-rc5
- Link to v3: https://lore.kernel.org/r/[email protected]
Changes in v3:
- Address maintainer comments:
- Drop GPIO dynamic allocation patch
- Move clock register offsets into driver (instead of bindings file)
- Add missing Tested-by trailer to u32_fract patch
- Move SoC binding to arm/mrvl/mrvl.yaml
- Add serial0 alias and stdout-path to board dts to enable UART
debugging
- Rebase on v6.5-rc4
- Link to v2: https://lore.kernel.org/r/[email protected]
Changes in v2:
- Remove earlycon patch as it's been merged into tty-next
- Address maintainer comments:
- Clarify GPIO regressions on older PXA platforms
- Add Fixes tag to commit disabling GPIO pinctrl calls for this SoC
- Add missing includes to clock driver
- Clock driver uses HZ_PER_MHZ, u32_fract and GENMASK
- Dual license clock bindings
- Change clock IDs to decimal
- Fix underscores in dt node names
- Move chosen node to top of board dts
- Clean up documentation
- Reorder commits
- Drop pxa,rev-id
- Rename muic-i2c to i2c-muic
- Reword some commits
- Move framebuffer node to chosen
- Add aliases for mmc nodes
- Rebase on v6.5-rc3
- Link to v1: https://lore.kernel.org/r/[email protected]
---
Andy Shevchenko (1):
clk: mmp: Switch to use struct u32_fract instead of custom one
Duje Mihanović (11):
dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible
pinctrl: single: add marvell,pxa1908-padconf compatible
dt-bindings: clock: Add Marvell PXA1908 clock bindings
clk: mmp: Add Marvell PXA1908 APBC driver
clk: mmp: Add Marvell PXA1908 APBCP driver
clk: mmp: Add Marvell PXA1908 APMU driver
clk: mmp: Add Marvell PXA1908 MPMU driver
dt-bindings: marvell: Document PXA1908 SoC
arm64: Kconfig.platforms: Add config for Marvell PXA1908 platform
arm64: dts: Add DTS for Marvell PXA1908 and samsung,coreprimevelte
MAINTAINERS: add myself as Marvell PXA1908 maintainer
.../devicetree/bindings/arm/mrvl/mrvl.yaml | 5 +
.../devicetree/bindings/clock/marvell,pxa1908.yaml | 48 +++
.../bindings/pinctrl/pinctrl-single.yaml | 4 +
MAINTAINERS | 9 +
arch/arm64/Kconfig.platforms | 8 +
arch/arm64/boot/dts/marvell/Makefile | 3 +
.../dts/marvell/pxa1908-samsung-coreprimevelte.dts | 328 +++++++++++++++++++++
arch/arm64/boot/dts/marvell/pxa1908.dtsi | 300 +++++++++++++++++++
drivers/clk/mmp/Makefile | 2 +-
drivers/clk/mmp/clk-frac.c | 57 ++--
drivers/clk/mmp/clk-of-mmp2.c | 26 +-
drivers/clk/mmp/clk-of-pxa168.c | 4 +-
drivers/clk/mmp/clk-of-pxa1928.c | 6 +-
drivers/clk/mmp/clk-of-pxa910.c | 4 +-
drivers/clk/mmp/clk-pxa1908-apbc.c | 131 ++++++++
drivers/clk/mmp/clk-pxa1908-apbcp.c | 84 ++++++
drivers/clk/mmp/clk-pxa1908-apmu.c | 123 ++++++++
drivers/clk/mmp/clk-pxa1908-mpmu.c | 112 +++++++
drivers/clk/mmp/clk.h | 10 +-
drivers/pinctrl/pinctrl-single.c | 1 +
include/dt-bindings/clock/marvell,pxa1908.h | 88 ++++++
21 files changed, 1296 insertions(+), 57 deletions(-)
---
base-commit: ed30a4a51bb196781c8058073ea720133a65596f
change-id: 20230803-pxa1908-lkml-6830e8da45c7
Best regards,
--
Duje Mihanović <[email protected]>
From: Duje Mihanović <[email protected]>
Add ARCH_MMP configuration option for Marvell PXA1908 SoC.
Signed-off-by: Duje Mihanović <[email protected]>
---
arch/arm64/Kconfig.platforms | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 24335565bad5..d71b0b6e75aa 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -168,6 +168,14 @@ config ARCH_MESON
This enables support for the arm64 based Amlogic SoCs
such as the s905, S905X/D, S912, A113X/D or S905X/D2
+config ARCH_MMP
+ bool "Marvell MMP SoC Family"
+ select PINCTRL
+ select PINCTRL_SINGLE
+ help
+ This enables support for Marvell MMP SoC family, currently
+ supporting PXA1908 aka IAP140.
+
config ARCH_MVEBU
bool "Marvell EBU SoC Family"
select ARMADA_AP806_SYSCON
--
2.44.0
From: Duje Mihanović <[email protected]>
Add myself as the maintainer for Marvell PXA1908 SoC support.
Signed-off-by: Duje Mihanović <[email protected]>
---
MAINTAINERS | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index ebf03f5f0619..5d48ac9801df 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2370,6 +2370,15 @@ F: drivers/irqchip/irq-mvebu-*
F: drivers/pinctrl/mvebu/
F: drivers/rtc/rtc-armada38x.c
+ARM/Marvell PXA1908 SOC support
+M: Duje Mihanović <[email protected]>
+L: [email protected] (moderated for non-subscribers)
+S: Maintained
+T: git https://gitlab.com/LegoLivesMatter/linux
+F: arch/arm64/boot/dts/marvell/pxa1908*
+F: drivers/clk/mmp/clk-pxa1908*.c
+F: include/dt-bindings/clock/marvell,pxa1908.h
+
ARM/Mediatek RTC DRIVER
M: Eddie Huang <[email protected]>
M: Sean Wang <[email protected]>
--
2.44.0
On Wed, 24 Apr 2024 20:42:27 +0200, Duje Mihanović wrote:
> Hello,
>
> This series adds initial support for the Marvell PXA1908 SoC and
> "samsung,coreprimevelte", a smartphone using the SoC.
>
> USB works and the phone can boot a rootfs from an SD card, but there are
> some warnings in the dmesg:
>
> During SMP initialization:
> [ 0.006519] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU1: 0x00000000000000
> [ 0.006542] CPU features: Unsupported CPU feature variation detected.
> [ 0.006589] CPU1: Booted secondary processor 0x0000000001 [0x410fd032]
> [ 0.010710] Detected VIPT I-cache on CPU2
> [ 0.010716] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU2: 0x00000000000000
> [ 0.010758] CPU2: Booted secondary processor 0x0000000002 [0x410fd032]
> [ 0.014849] Detected VIPT I-cache on CPU3
> [ 0.014855] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU3: 0x00000000000000
> [ 0.014895] CPU3: Booted secondary processor 0x0000000003 [0x410fd032]
>
> SMMU probing fails:
> [ 0.101798] arm-smmu c0010000.iommu: probing hardware configuration...
> [ 0.101809] arm-smmu c0010000.iommu: SMMUv1 with:
> [ 0.101816] arm-smmu c0010000.iommu: no translation support!
>
> A 3.14 based Marvell tree is available on GitHub
> acorn-marvell/brillo_pxa_kernel, and a Samsung one on GitHub
> CoderCharmander/g361f-kernel.
>
> Andreas Färber attempted to upstream support for this SoC in 2017:
> https://lore.kernel.org/lkml/[email protected]/
>
> Signed-off-by: Duje Mihanović <[email protected]>
>
> Changes in v10:
> - Update trailers
> - Rebase on v6.9-rc5
> - Clock driver changes:
> - Add a couple of forgotten clocks in APBC
> - The clocks are thermal_clk, ipc_clk, ssp0_clk, ssp2_clk and swjtag
> - The IDs and register offsets were already present, but I forgot to
> actually register them
> - Split each controller block into own file
> - Drop unneeded -of in clock driver filenames
> - Simplify struct pxa1908_clk_unit
> - Convert to platform driver
> - Add module metadata
> - DTS changes:
> - Properly name pinctrl nodes
> - Drop pinctrl #size-cells, #address-cells, ranges and #gpio-size-cells
> - Fix pinctrl input-schmitt configuration
> - Link to v9: https://lore.kernel.org/[email protected]
>
> Changes in v9:
> - Update trailers and rebase on v6.9-rc2, no changes
> - Link to v8: https://lore.kernel.org/[email protected]
>
> Changes in v8:
> - Drop SSPA patch
> - Drop broken-cd from eMMC node
> - Specify S-Boot hardcoded initramfs location in device tree
> - Add ARM PMU node
> - Correct inverted modem memory base and size
> - Update trailers
> - Rebase on next-20240110
> - Link to v7: https://lore.kernel.org/[email protected]
> and https://lore.kernel.org/[email protected]
>
> Changes in v7:
> - Suppress SND_MMP_SOC_SSPA on ARM64
> - Update trailers
> - Rebase on v6.6-rc7
> - Link to v6: https://lore.kernel.org/r/[email protected]
>
> Changes in v6:
> - Address maintainer comments:
> - Add "marvell,pxa1908-padconf" binding to pinctrl-single driver
> - Drop GPIO patch as it's been pulled
> - Update trailers
> - Rebase on v6.6-rc5
> - Link to v5: https://lore.kernel.org/r/[email protected]
>
> Changes in v5:
> - Address maintainer comments:
> - Move *_NR_CLKS to clock driver from dt binding file
> - Allocate correct number of clocks for each block instead of blindly
> allocating 50 for each
> - Link to v4: https://lore.kernel.org/r/[email protected]
>
> Changes in v4:
> - Address maintainer comments:
> - Relicense clock binding file to BSD-2
> - Add pinctrl-names to SD card node
> - Add vgic registers to GIC node
> - Rebase on v6.5-rc5
> - Link to v3: https://lore.kernel.org/r/[email protected]
>
> Changes in v3:
> - Address maintainer comments:
> - Drop GPIO dynamic allocation patch
> - Move clock register offsets into driver (instead of bindings file)
> - Add missing Tested-by trailer to u32_fract patch
> - Move SoC binding to arm/mrvl/mrvl.yaml
> - Add serial0 alias and stdout-path to board dts to enable UART
> debugging
> - Rebase on v6.5-rc4
> - Link to v2: https://lore.kernel.org/r/[email protected]
>
> Changes in v2:
> - Remove earlycon patch as it's been merged into tty-next
> - Address maintainer comments:
> - Clarify GPIO regressions on older PXA platforms
> - Add Fixes tag to commit disabling GPIO pinctrl calls for this SoC
> - Add missing includes to clock driver
> - Clock driver uses HZ_PER_MHZ, u32_fract and GENMASK
> - Dual license clock bindings
> - Change clock IDs to decimal
> - Fix underscores in dt node names
> - Move chosen node to top of board dts
> - Clean up documentation
> - Reorder commits
> - Drop pxa,rev-id
> - Rename muic-i2c to i2c-muic
> - Reword some commits
> - Move framebuffer node to chosen
> - Add aliases for mmc nodes
> - Rebase on v6.5-rc3
> - Link to v1: https://lore.kernel.org/r/[email protected]
>
> ---
> Andy Shevchenko (1):
> clk: mmp: Switch to use struct u32_fract instead of custom one
>
> Duje Mihanović (11):
> dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible
> pinctrl: single: add marvell,pxa1908-padconf compatible
> dt-bindings: clock: Add Marvell PXA1908 clock bindings
> clk: mmp: Add Marvell PXA1908 APBC driver
> clk: mmp: Add Marvell PXA1908 APBCP driver
> clk: mmp: Add Marvell PXA1908 APMU driver
> clk: mmp: Add Marvell PXA1908 MPMU driver
> dt-bindings: marvell: Document PXA1908 SoC
> arm64: Kconfig.platforms: Add config for Marvell PXA1908 platform
> arm64: dts: Add DTS for Marvell PXA1908 and samsung,coreprimevelte
> MAINTAINERS: add myself as Marvell PXA1908 maintainer
>
> .../devicetree/bindings/arm/mrvl/mrvl.yaml | 5 +
> .../devicetree/bindings/clock/marvell,pxa1908.yaml | 48 +++
> .../bindings/pinctrl/pinctrl-single.yaml | 4 +
> MAINTAINERS | 9 +
> arch/arm64/Kconfig.platforms | 8 +
> arch/arm64/boot/dts/marvell/Makefile | 3 +
> .../dts/marvell/pxa1908-samsung-coreprimevelte.dts | 328 +++++++++++++++++++++
> arch/arm64/boot/dts/marvell/pxa1908.dtsi | 300 +++++++++++++++++++
> drivers/clk/mmp/Makefile | 2 +-
> drivers/clk/mmp/clk-frac.c | 57 ++--
> drivers/clk/mmp/clk-of-mmp2.c | 26 +-
> drivers/clk/mmp/clk-of-pxa168.c | 4 +-
> drivers/clk/mmp/clk-of-pxa1928.c | 6 +-
> drivers/clk/mmp/clk-of-pxa910.c | 4 +-
> drivers/clk/mmp/clk-pxa1908-apbc.c | 131 ++++++++
> drivers/clk/mmp/clk-pxa1908-apbcp.c | 84 ++++++
> drivers/clk/mmp/clk-pxa1908-apmu.c | 123 ++++++++
> drivers/clk/mmp/clk-pxa1908-mpmu.c | 112 +++++++
> drivers/clk/mmp/clk.h | 10 +-
> drivers/pinctrl/pinctrl-single.c | 1 +
> include/dt-bindings/clock/marvell,pxa1908.h | 88 ++++++
> 21 files changed, 1296 insertions(+), 57 deletions(-)
> ---
> base-commit: ed30a4a51bb196781c8058073ea720133a65596f
> change-id: 20230803-pxa1908-lkml-6830e8da45c7
>
> Best regards,
> --
> Duje Mihanović <[email protected]>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
New warnings running 'make CHECK_DTBS=y marvell/pxa1908-samsung-coreprimevelte.dtb' for [email protected]:
arch/arm64/boot/dts/marvell/pxa1908-samsung-coreprimevelte.dtb: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 0, 0, 0]]}
from schema $id: http://devicetree.org/schemas/root-node.yaml#
arch/arm64/boot/dts/marvell/pxa1908-samsung-coreprimevelte.dtb: pinmux@1e000: pinctrl-single,gpio-range: [[8, 55, 55, 0], [8, 110, 32, 0], [8, 52, 1, 0]] is too long
from schema $id: http://devicetree.org/schemas/pinctrl/pinctrl-single.yaml#
arch/arm64/boot/dts/marvell/pxa1908-samsung-coreprimevelte.dtb: mmc@80000: pinctrl-names: ['default'] is too short
from schema $id: http://devicetree.org/schemas/mmc/sdhci-pxa.yaml#
arch/arm64/boot/dts/marvell/pxa1908-samsung-coreprimevelte.dtb: mmc@80000: Unevaluated properties are not allowed ('pinctrl-names' was unexpected)
from schema $id: http://devicetree.org/schemas/mmc/sdhci-pxa.yaml#