These patches enable USB in peripheral mode on Pixel 6.
We can only support peripheral mode at this stage, as the MAX77759 TCPCI
controller used on Pixel 6 to do the role selection doesn't have a(n
upstream) Linux driver. Therefore the role is defaulted to peripheral
without any endpoints / ports.
For the same reason, we can not detect the orientation of a SS USB-C cable
and therefore it will only establish a link in SS mode in one of the
possible orientations of the cable. In all other cases, the link will be HS.
This series has a dependency on other patches, please see below.
I have mainly tested this as CDC ECM Ethernet device using the following:
mount -t configfs configfs /sys/kernel/config/
modprobe libcomposite
modprobe usb_f_ecm
mkdir /sys/kernel/config/usb_gadget/g3
cd /sys/kernel/config/usb_gadget/g3
echo 0xadad > idVendor
echo 0xddaa > idProduct
mkdir strings/0x409
echo 01234567 > strings/0x409/serialnumber
echo ADADAD > strings/0x409/manufacturer
cat /proc/device-tree/model > strings/0x409/product
# create the function (name must match a usb_f_<name> module such as 'acm')
mkdir functions/ecm.usb0
# stable MAC addresses
echo "6e:27:3a:b9:40:87" > functions/ecm.usb0/dev_addr
echo "ca:49:84:b0:3b:bc" > functions/ecm.usb0/host_addr
mkdir configs/c.1
ln -s functions/ecm.usb0 configs/c.1/
echo $(ls -1 /sys/class/udc/) > UDC
ifconfig usb0 192.168.1.2 up
at which point the other side should detect it and network communication
becomes possible (once the other side also configures its network
interface).
Due to the clock IDs and DTS phandle references, this series depends on the
bindings and DTS patches
"dt-bindings: clock: google,gs101-clock: add HSI0 clock management unit"
"arm64: dts: exynos: gs101: enable cmu-hsi0 clock controller" of
the series in
https://lore.kernel.org/r/[email protected]
(which have been merged to linux-next already)
Furthermore, it also depends on the bindings for USB and USB-phy which have
been proposed as part of:
https://lore.kernel.org/r/[email protected]
and
https://lore.kernel.org/r/[email protected]
respectively and haven't been merged yet.
Signed-off-by: André Draszik <[email protected]>
---
Changes in v2:
- fix commit messages
- rebase against 20240429 linux-next
- Link to v1: https://lore.kernel.org/r/[email protected]
---
André Draszik (2):
arm64: dts: exynos: gs101: add USB & USB-phy nodes
arm64: dts: exynos: gs101-oriole: enable USB on this board
arch/arm64/boot/dts/exynos/google/gs101-oriole.dts | 24 +++++++++++++
arch/arm64/boot/dts/exynos/google/gs101.dtsi | 41 ++++++++++++++++++++++
2 files changed, 65 insertions(+)
---
base-commit: b0a2c79c6f3590b74742cbbc76687014d47972d8
change-id: 20240423-usb-dts-gs101-4269e0177c0f
Best regards,
--
André Draszik <[email protected]>
On Mon, 29 Apr 2024 11:35:48 +0100, André Draszik wrote:
> These patches enable USB in peripheral mode on Pixel 6.
>
> We can only support peripheral mode at this stage, as the MAX77759 TCPCI
> controller used on Pixel 6 to do the role selection doesn't have a(n
> upstream) Linux driver. Therefore the role is defaulted to peripheral
> without any endpoints / ports.
>
> [...]
Applied, thanks!
[1/2] arm64: dts: exynos: gs101: add USB & USB-phy nodes
https://git.kernel.org/krzk/linux/c/14d15fcbe0f1fac5979a0b01160f3651340e38b4
[2/2] arm64: dts: exynos: gs101-oriole: enable USB on this board
https://git.kernel.org/krzk/linux/c/b93b3140e82a0e48442087c38346eabfb92c63af
Best regards,
--
Krzysztof Kozlowski <[email protected]>