Add documentation for ti,pa-stats property which is syscon regmap for
PA_STATS registers. This will be used to dump statistics maintained by
ICSSG firmware.
Signed-off-by: MD Danish Anwar <[email protected]>
---
Changes from v1 to v2:
*) Updated description of ti,pa-stats to explain the purpose of PA_STATS
module in context of ICSSG.
v1 https://lore.kernel.org/all/[email protected]/
.../devicetree/bindings/net/ti,icssg-prueth.yaml | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml
index e253fa786092..c296e5711848 100644
--- a/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml
+++ b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml
@@ -55,6 +55,14 @@ properties:
description:
phandle to MII_RT module's syscon regmap
+ ti,pa-stats:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to PA_STATS module's syscon regmap. PA_STATS is a set of
+ registers where different statistics related to ICSSG, are dumped by
+ ICSSG firmware. PA_STATS module's syscon regmap will help the device to
+ access/read/write those statistics.
+
ti,iep:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 2
@@ -194,6 +202,7 @@ examples:
"tx1-0", "tx1-1", "tx1-2", "tx1-3",
"rx0", "rx1";
ti,mii-g-rt = <&icssg2_mii_g_rt>;
+ ti,pa-stats = <&icssg2_pa_stats>;
ti,iep = <&icssg2_iep0>, <&icssg2_iep1>;
interrupt-parent = <&icssg2_intc>;
interrupts = <24 0 2>, <25 1 3>;
--
2.34.1
On 29/05/2024 13:52, MD Danish Anwar wrote:
> Add documentation for ti,pa-stats property which is syscon regmap for
> PA_STATS registers. This will be used to dump statistics maintained by
> ICSSG firmware.
>
> Signed-off-by: MD Danish Anwar <[email protected]>
> ---
Acked-by: Krzysztof Kozlowski <[email protected]>
Best regards,
Krzysztof
Hello:
This patch was applied to netdev/net-next.git (main)
by Jakub Kicinski <[email protected]>:
On Wed, 29 May 2024 17:22:25 +0530 you wrote:
> Add documentation for ti,pa-stats property which is syscon regmap for
> PA_STATS registers. This will be used to dump statistics maintained by
> ICSSG firmware.
>
> Signed-off-by: MD Danish Anwar <[email protected]>
> ---
> Changes from v1 to v2:
> *) Updated description of ti,pa-stats to explain the purpose of PA_STATS
> module in context of ICSSG.
>
> [...]
Here is the summary with links:
- [v2] dt-bindings: net: ti: icssg_prueth: Add documentation for PA_STATS support
https://git.kernel.org/netdev/net-next/c/2f19a795e1f9
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html