The core change is to detect unusually large number of VPD pages
(caused by device manufacturers having an endiannes issue) and reject
them rather than trying to parse a huge non-existent array. The
remaining fixes are in drivers the most user visible of which is the
ALUA state transition recognition (leads to intermittent I/O errors in
some situations otherwise).
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes
The short changelog is:
Chanwoo Lee (1):
scsi: ufs: mcq: Fix error output and clean up ufshcd_mcq_abort()
Deming Wang (1):
scsi: mpt3sas: Add missing kerneldoc parameter descriptions
Justin Stitt (1):
scsi: sr: Fix unintentional arithmetic wraparound
Martin K. Petersen (1):
scsi: core: Handle devices which return an unusually large VPD page count
Martin Wilck (1):
scsi: core: alua: I/O errors for ALUA state transitions
Nathan Chancellor (1):
scsi: mpi3mr: Use proper format specifier in mpi3mr_sas_port_add()
Saurav Kashyap (3):
scsi: qedf: Set qed_slowpath_params to zero before use
scsi: qedf: Wait for stag work during unload
scsi: qedf: Don't process stag work during unload and recovery
And the diffstat:
Documentation/cdrom/cdrom-standard.rst | 4 +--
drivers/scsi/device_handler/scsi_dh_alua.c | 31 ++++++++++++++------
drivers/scsi/mpi3mr/mpi3mr_transport.c | 2 +-
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 4 +--
drivers/scsi/qedf/qedf.h | 1 +
drivers/scsi/qedf/qedf_main.c | 47 ++++++++++++++++++++++++++++--
drivers/scsi/scsi.c | 7 +++++
drivers/scsi/sr.h | 2 +-
drivers/scsi/sr_ioctl.c | 5 +++-
drivers/ufs/core/ufs-mcq.c | 17 +++++------
include/linux/cdrom.h | 2 +-
11 files changed, 93 insertions(+), 29 deletions(-)
With full diff below
James
---
diff --git a/Documentation/cdrom/cdrom-standard.rst b/Documentation/cdrom/cdrom-standard.rst
index 7964fe134277..6c1303cff159 100644
--- a/Documentation/cdrom/cdrom-standard.rst
+++ b/Documentation/cdrom/cdrom-standard.rst
@@ -217,7 +217,7 @@ current *struct* is::
int (*media_changed)(struct cdrom_device_info *, int);
int (*tray_move)(struct cdrom_device_info *, int);
int (*lock_door)(struct cdrom_device_info *, int);
- int (*select_speed)(struct cdrom_device_info *, int);
+ int (*select_speed)(struct cdrom_device_info *, unsigned long);
int (*get_last_session) (struct cdrom_device_info *,
struct cdrom_multisession *);
int (*get_mcn)(struct cdrom_device_info *, struct cdrom_mcn *);
@@ -396,7 +396,7 @@ action need be taken, and the return value should be 0.
::
- int select_speed(struct cdrom_device_info *cdi, int speed)
+ int select_speed(struct cdrom_device_info *cdi, unsigned long speed)
Some CD-ROM drives are capable of changing their head-speed. There
are several reasons for changing the speed of a CD-ROM drive. Badly
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index a226dc1b65d7..4eb0837298d4 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -414,28 +414,40 @@ static char print_alua_state(unsigned char state)
}
}
-static enum scsi_disposition alua_check_sense(struct scsi_device *sdev,
- struct scsi_sense_hdr *sense_hdr)
+static void alua_handle_state_transition(struct scsi_device *sdev)
{
struct alua_dh_data *h = sdev->handler_data;
struct alua_port_group *pg;
+ rcu_read_lock();
+ pg = rcu_dereference(h->pg);
+ if (pg)
+ pg->state = SCSI_ACCESS_STATE_TRANSITIONING;
+ rcu_read_unlock();
+ alua_check(sdev, false);
+}
+
+static enum scsi_disposition alua_check_sense(struct scsi_device *sdev,
+ struct scsi_sense_hdr *sense_hdr)
+{
switch (sense_hdr->sense_key) {
case NOT_READY:
if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0a) {
/*
* LUN Not Accessible - ALUA state transition
*/
- rcu_read_lock();
- pg = rcu_dereference(h->pg);
- if (pg)
- pg->state = SCSI_ACCESS_STATE_TRANSITIONING;
- rcu_read_unlock();
- alua_check(sdev, false);
+ alua_handle_state_transition(sdev);
return NEEDS_RETRY;
}
break;
case UNIT_ATTENTION:
+ if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0a) {
+ /*
+ * LUN Not Accessible - ALUA state transition
+ */
+ alua_handle_state_transition(sdev);
+ return NEEDS_RETRY;
+ }
if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00) {
/*
* Power On, Reset, or Bus Device Reset.
@@ -502,7 +514,8 @@ static int alua_tur(struct scsi_device *sdev)
retval = scsi_test_unit_ready(sdev, ALUA_FAILOVER_TIMEOUT * HZ,
ALUA_FAILOVER_RETRIES, &sense_hdr);
- if (sense_hdr.sense_key == NOT_READY &&
+ if ((sense_hdr.sense_key == NOT_READY ||
+ sense_hdr.sense_key == UNIT_ATTENTION) &&
sense_hdr.asc == 0x04 && sense_hdr.ascq == 0x0a)
return SCSI_DH_RETRY;
else if (retval)
diff --git a/drivers/scsi/mpi3mr/mpi3mr_transport.c b/drivers/scsi/mpi3mr/mpi3mr_transport.c
index 329cc6ec3b58..82aa4e418c5a 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_transport.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_transport.c
@@ -1364,7 +1364,7 @@ static struct mpi3mr_sas_port *mpi3mr_sas_port_add(struct mpi3mr_ioc *mrioc,
continue;
if (i > sizeof(mr_sas_port->phy_mask) * 8) {
- ioc_warn(mrioc, "skipping port %u, max allowed value is %lu\n",
+ ioc_warn(mrioc, "skipping port %u, max allowed value is %zu\n",
i, sizeof(mr_sas_port->phy_mask) * 8);
goto out_fail;
}
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 89ef43a5ef86..12d08d8ba538 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -302,8 +302,8 @@ struct _scsi_io_transfer {
/**
* _scsih_set_debug_level - global setting of ioc->logging_level.
- * @val: ?
- * @kp: ?
+ * @val: value of the parameter to be set
+ * @kp: pointer to kernel_param structure
*
* Note: The logging levels are defined in mpt3sas_debug.h.
*/
diff --git a/drivers/scsi/qedf/qedf.h b/drivers/scsi/qedf/qedf.h
index 5058e01b65a2..98afdfe63600 100644
--- a/drivers/scsi/qedf/qedf.h
+++ b/drivers/scsi/qedf/qedf.h
@@ -363,6 +363,7 @@ struct qedf_ctx {
#define QEDF_IN_RECOVERY 5
#define QEDF_DBG_STOP_IO 6
#define QEDF_PROBING 8
+#define QEDF_STAG_IN_PROGRESS 9
unsigned long flags; /* Miscellaneous state flags */
int fipvlan_retries;
u8 num_queues;
diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c
index fd12439cbaab..49adddf978cc 100644
--- a/drivers/scsi/qedf/qedf_main.c
+++ b/drivers/scsi/qedf/qedf_main.c
@@ -318,11 +318,18 @@ static struct fc_seq *qedf_elsct_send(struct fc_lport *lport, u32 did,
*/
if (resp == fc_lport_flogi_resp) {
qedf->flogi_cnt++;
+ qedf->flogi_pending++;
+
+ if (test_bit(QEDF_UNLOADING, &qedf->flags)) {
+ QEDF_ERR(&qedf->dbg_ctx, "Driver unloading\n");
+ qedf->flogi_pending = 0;
+ }
+
if (qedf->flogi_pending >= QEDF_FLOGI_RETRY_CNT) {
schedule_delayed_work(&qedf->stag_work, 2);
return NULL;
}
- qedf->flogi_pending++;
+
return fc_elsct_send(lport, did, fp, op, qedf_flogi_resp,
arg, timeout);
}
@@ -912,13 +919,14 @@ void qedf_ctx_soft_reset(struct fc_lport *lport)
struct qedf_ctx *qedf;
struct qed_link_output if_link;
+ qedf = lport_priv(lport);
+
if (lport->vport) {
+ clear_bit(QEDF_STAG_IN_PROGRESS, &qedf->flags);
printk_ratelimited("Cannot issue host reset on NPIV port.\n");
return;
}
- qedf = lport_priv(lport);
-
qedf->flogi_pending = 0;
/* For host reset, essentially do a soft link up/down */
atomic_set(&qedf->link_state, QEDF_LINK_DOWN);
@@ -938,6 +946,7 @@ void qedf_ctx_soft_reset(struct fc_lport *lport)
if (!if_link.link_up) {
QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_DISC,
"Physical link is not up.\n");
+ clear_bit(QEDF_STAG_IN_PROGRESS, &qedf->flags);
return;
}
/* Flush and wait to make sure link down is processed */
@@ -950,6 +959,7 @@ void qedf_ctx_soft_reset(struct fc_lport *lport)
"Queue link up work.\n");
queue_delayed_work(qedf->link_update_wq, &qedf->link_update,
0);
+ clear_bit(QEDF_STAG_IN_PROGRESS, &qedf->flags);
}
/* Reset the host by gracefully logging out and then logging back in */
@@ -3463,6 +3473,7 @@ static int __qedf_probe(struct pci_dev *pdev, int mode)
}
/* Start the Slowpath-process */
+ memset(&slowpath_params, 0, sizeof(struct qed_slowpath_params));
slowpath_params.int_mode = QED_INT_MODE_MSIX;
slowpath_params.drv_major = QEDF_DRIVER_MAJOR_VER;
slowpath_params.drv_minor = QEDF_DRIVER_MINOR_VER;
@@ -3721,6 +3732,7 @@ static void __qedf_remove(struct pci_dev *pdev, int mode)
{
struct qedf_ctx *qedf;
int rc;
+ int cnt = 0;
if (!pdev) {
QEDF_ERR(NULL, "pdev is NULL.\n");
@@ -3738,6 +3750,17 @@ static void __qedf_remove(struct pci_dev *pdev, int mode)
return;
}
+stag_in_prog:
+ if (test_bit(QEDF_STAG_IN_PROGRESS, &qedf->flags)) {
+ QEDF_ERR(&qedf->dbg_ctx, "Stag in progress, cnt=%d.\n", cnt);
+ cnt++;
+
+ if (cnt < 5) {
+ msleep(500);
+ goto stag_in_prog;
+ }
+ }
+
if (mode != QEDF_MODE_RECOVERY)
set_bit(QEDF_UNLOADING, &qedf->flags);
@@ -3997,6 +4020,24 @@ void qedf_stag_change_work(struct work_struct *work)
struct qedf_ctx *qedf =
container_of(work, struct qedf_ctx, stag_work.work);
+ if (!qedf) {
+ QEDF_ERR(&qedf->dbg_ctx, "qedf is NULL");
+ return;
+ }
+
+ if (test_bit(QEDF_IN_RECOVERY, &qedf->flags)) {
+ QEDF_ERR(&qedf->dbg_ctx,
+ "Already is in recovery, hence not calling software context reset.\n");
+ return;
+ }
+
+ if (test_bit(QEDF_UNLOADING, &qedf->flags)) {
+ QEDF_ERR(&qedf->dbg_ctx, "Driver unloading\n");
+ return;
+ }
+
+ set_bit(QEDF_STAG_IN_PROGRESS, &qedf->flags);
+
printk_ratelimited("[%s]:[%s:%d]:%d: Performing software context reset.",
dev_name(&qedf->pdev->dev), __func__, __LINE__,
qedf->dbg_ctx.host_no);
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 3e0c0381277a..f0464db3f9de 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -350,6 +350,13 @@ static int scsi_get_vpd_size(struct scsi_device *sdev, u8 page)
if (result < SCSI_VPD_HEADER_SIZE)
return 0;
+ if (result > sizeof(vpd)) {
+ dev_warn_once(&sdev->sdev_gendev,
+ "%s: long VPD page 0 length: %d bytes\n",
+ __func__, result);
+ result = sizeof(vpd);
+ }
+
result -= SCSI_VPD_HEADER_SIZE;
if (!memchr(&vpd[SCSI_VPD_HEADER_SIZE], page, result))
return 0;
diff --git a/drivers/scsi/sr.h b/drivers/scsi/sr.h
index 1175f2e213b5..dc899277b3a4 100644
--- a/drivers/scsi/sr.h
+++ b/drivers/scsi/sr.h
@@ -65,7 +65,7 @@ int sr_disk_status(struct cdrom_device_info *);
int sr_get_last_session(struct cdrom_device_info *, struct cdrom_multisession *);
int sr_get_mcn(struct cdrom_device_info *, struct cdrom_mcn *);
int sr_reset(struct cdrom_device_info *);
-int sr_select_speed(struct cdrom_device_info *cdi, int speed);
+int sr_select_speed(struct cdrom_device_info *cdi, unsigned long speed);
int sr_audio_ioctl(struct cdrom_device_info *, unsigned int, void *);
int sr_is_xa(Scsi_CD *);
diff --git a/drivers/scsi/sr_ioctl.c b/drivers/scsi/sr_ioctl.c
index 5b0b35e60e61..a0d2556a27bb 100644
--- a/drivers/scsi/sr_ioctl.c
+++ b/drivers/scsi/sr_ioctl.c
@@ -425,11 +425,14 @@ int sr_reset(struct cdrom_device_info *cdi)
return 0;
}
-int sr_select_speed(struct cdrom_device_info *cdi, int speed)
+int sr_select_speed(struct cdrom_device_info *cdi, unsigned long speed)
{
Scsi_CD *cd = cdi->handle;
struct packet_command cgc;
+ /* avoid exceeding the max speed or overflowing integer bounds */
+ speed = clamp(0, speed, 0xffff / 177);
+
if (speed == 0)
speed = 0xffff; /* set to max */
else
diff --git a/drivers/ufs/core/ufs-mcq.c b/drivers/ufs/core/ufs-mcq.c
index 005d63ab1f44..8944548c30fa 100644
--- a/drivers/ufs/core/ufs-mcq.c
+++ b/drivers/ufs/core/ufs-mcq.c
@@ -634,20 +634,20 @@ int ufshcd_mcq_abort(struct scsi_cmnd *cmd)
struct ufshcd_lrb *lrbp = &hba->lrb[tag];
struct ufs_hw_queue *hwq;
unsigned long flags;
- int err = FAILED;
+ int err;
if (!ufshcd_cmd_inflight(lrbp->cmd)) {
dev_err(hba->dev,
"%s: skip abort. cmd at tag %d already completed.\n",
__func__, tag);
- goto out;
+ return FAILED;
}
/* Skip task abort in case previous aborts failed and report failure */
if (lrbp->req_abort_skip) {
dev_err(hba->dev, "%s: skip abort. tag %d failed earlier\n",
__func__, tag);
- goto out;
+ return FAILED;
}
hwq = ufshcd_mcq_req_to_hwq(hba, scsi_cmd_to_rq(cmd));
@@ -659,7 +659,7 @@ int ufshcd_mcq_abort(struct scsi_cmnd *cmd)
*/
dev_err(hba->dev, "%s: cmd found in sq. hwq=%d, tag=%d\n",
__func__, hwq->id, tag);
- goto out;
+ return FAILED;
}
/*
@@ -667,18 +667,17 @@ int ufshcd_mcq_abort(struct scsi_cmnd *cmd)
* in the completion queue either. Query the device to see if
* the command is being processed in the device.
*/
- if (ufshcd_try_to_abort_task(hba, tag)) {
+ err = ufshcd_try_to_abort_task(hba, tag);
+ if (err) {
dev_err(hba->dev, "%s: device abort failed %d\n", __func__, err);
lrbp->req_abort_skip = true;
- goto out;
+ return FAILED;
}
- err = SUCCESS;
spin_lock_irqsave(&hwq->cq_lock, flags);
if (ufshcd_cmd_inflight(lrbp->cmd))
ufshcd_release_scsi_cmd(hba, lrbp);
spin_unlock_irqrestore(&hwq->cq_lock, flags);
-out:
- return err;
+ return SUCCESS;
}
diff --git a/include/linux/cdrom.h b/include/linux/cdrom.h
index 98c6fd0b39b6..fdfb61ccf55a 100644
--- a/include/linux/cdrom.h
+++ b/include/linux/cdrom.h
@@ -77,7 +77,7 @@ struct cdrom_device_ops {
unsigned int clearing, int slot);
int (*tray_move) (struct cdrom_device_info *, int);
int (*lock_door) (struct cdrom_device_info *, int);
- int (*select_speed) (struct cdrom_device_info *, int);
+ int (*select_speed) (struct cdrom_device_info *, unsigned long);
int (*get_last_session) (struct cdrom_device_info *,
struct cdrom_multisession *);
int (*get_mcn) (struct cdrom_device_info *,
The pull request you sent on Thu, 06 Jun 2024 15:03:50 -0400:
> git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes
has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/8a92980606e3585d72d510a03b59906e96755b8a
Thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/prtracker.html