All Samsung Exynos SoCs Thermal Management Units have only one sensor,
so make '#thermal-sensor-cells' fixed at 0.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml b/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml
index 1344df708e2d..29a08b0729ee 100644
--- a/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml
@@ -61,7 +61,8 @@ properties:
TRIMINFO at 0x10068000 contains data for TMU channel 2
minItems: 1
- '#thermal-sensor-cells': true
+ '#thermal-sensor-cells':
+ const: 0
vtmu-supply:
description: The regulator node supplying voltage to TMU.
--
2.43.0
Hi Krzysztof,
> -----Original Message-----
> From: Krzysztof Kozlowski <[email protected]>
> Sent: Friday, June 14, 2024 3:16 PM
> To: Daniel Lezcano <[email protected]
.stormreply.com;
> Subject: [PATCH 01/22] dt-bindings: thermal: samsung,exynos: specify cells
>
> All Samsung Exynos SoCs Thermal Management Units have only one sensor, so
> make '#thermal-sensor-cells' fixed at 0.
>
This is not entirely true, there are SoCs which have multiple temp sensors.
It is true that currently only one sensor support is added though.
So we can leave this as is or you suggest to make it to support only one sensor
(to match the current DT support), and later (in near future) change it again to
match what HW actually support?
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> ---
> Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml | 3
> ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/thermal/samsung,exynos-
> thermal.yaml b/Documentation/devicetree/bindings/thermal/samsung,exynos-
> thermal.yaml
> index 1344df708e2d..29a08b0729ee 100644
> --- a/Documentation/devicetree/bindings/thermal/samsung,exynos-
> thermal.yaml
> +++ b/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.y
> +++ aml
> @@ -61,7 +61,8 @@ properties:
> TRIMINFO at 0x10068000 contains data for TMU channel 2
> minItems: 1
>
> - '#thermal-sensor-cells': true
> + '#thermal-sensor-cells':
> + const: 0
>
> vtmu-supply:
> description: The regulator node supplying voltage to TMU.
>
> --
> 2.43.0
On 14/06/2024 16:29, Alim Akhtar wrote:
> Hi Krzysztof,
>
>> -----Original Message-----
>> From: Krzysztof Kozlowski <[email protected]>
>> Sent: Friday, June 14, 2024 3:16 PM
>> To: Daniel Lezcano <[email protected]
> .stormreply.com;
>> Subject: [PATCH 01/22] dt-bindings: thermal: samsung,exynos: specify cells
>>
>> All Samsung Exynos SoCs Thermal Management Units have only one sensor, so
>> make '#thermal-sensor-cells' fixed at 0.
>>
> This is not entirely true, there are SoCs which have multiple temp sensors.
> It is true that currently only one sensor support is added though.
All supported by mainline. Others do not exist now :)
>
> So we can leave this as is or you suggest to make it to support only one sensor
> (to match the current DT support), and later (in near future) change it again to
> match what HW actually support?
Yes, different devices can have different value (and bindings).
Best regards,
Krzysztof