2014-12-14 05:09:15

by Jongman Heo

[permalink] [raw]
Subject: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")


Hi,

My Linux virtual machine on (Windows) VMWare workstation 10 can't boot with following commit.

commit bd809af16e3ab1f8d55b3e2928c47c67e2a865d2
Author: Juergen Gross
Date: Mon Nov 3 14:02:03 2014 +0100

x86: Enable PAT to use cache mode translation tables

Unfortunately I can't see any console log.
Reverting the commit fixes my boot issue. git bisect log follows,

$ git bisect log
git bisect start
# bad: [92a578b064d0227a3a7fbbdb9e29dbab7f8d400e] Merge tag 'pm+acpi-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
git bisect bad 92a578b064d0227a3a7fbbdb9e29dbab7f8d400e
# good: [b2776bf7149bddd1f4161f14f79520f17fc1d71d] Linux 3.18
git bisect good b2776bf7149bddd1f4161f14f79520f17fc1d71d
# good: [6da314122ddc11936c6f054753bbb956a499d020] Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
git bisect good 6da314122ddc11936c6f054753bbb956a499d020
# good: [482a3767e5087f6e6ad2486a6655aaa5f3d59301] exit: reparent: call forget_original_parent() under tasklist_lock
git bisect good 482a3767e5087f6e6ad2486a6655aaa5f3d59301
# bad: [cbfe0de303a55ed96d8831c2d5f56f8131cd6612] Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
git bisect bad cbfe0de303a55ed96d8831c2d5f56f8131cd6612
# bad: [a6b849578ef3e0b131b1ea4063473a4f935a65e9] Merge branch 'for-linus' of git://git.samba.org/sfrench/cifs-2.6
git bisect bad a6b849578ef3e0b131b1ea4063473a4f935a65e9
# bad: [c9f861c77269bc9950c16c6404a9476062241671] Merge branch 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect bad c9f861c77269bc9950c16c6404a9476062241671
# good: [773fed910d41e443e495a6bfa9ab1c2b7b13e012] Merge branches 'x86-platform-for-linus' and 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect good 773fed910d41e443e495a6bfa9ab1c2b7b13e012
# good: [773fed910d41e443e495a6bfa9ab1c2b7b13e012] Merge branches 'x86-platform-for-linus' and 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect good 773fed910d41e443e495a6bfa9ab1c2b7b13e012
# good: [f439c429c320981943f8b64b2a4049d946cb492b] x86: Support PAT bit in pagetable dump for lower levels
git bisect good f439c429c320981943f8b64b2a4049d946cb492b
# good: [e3480271f59253cb60d030aa5e615bf00b731fea] x86, mce, severity: Extend the the mce_severity mechanism to handle UCNA/DEFERRED error
git bisect good e3480271f59253cb60d030aa5e615bf00b731fea
# bad: [0dbcae884779fdf7e2239a97ac7488877f0693d9] x86: mm: Move PAT only functions to mm/pat.c
git bisect bad 0dbcae884779fdf7e2239a97ac7488877f0693d9
# bad: [bd809af16e3ab1f8d55b3e2928c47c67e2a865d2] x86: Enable PAT to use cache mode translation tables
git bisect bad bd809af16e3ab1f8d55b3e2928c47c67e2a865d2
# good: [f5b2831d654167d77da8afbef4d2584897b12d0c] x86: Respect PAT bit when copying pte values between large and normal pages
git bisect good f5b2831d654167d77da8afbef4d2584897b12d0c
# first bad commit: [bd809af16e3ab1f8d55b3e2928c47c67e2a865d2] x86: Enable PAT to use cache mode translation tables

????{.n?+???????+%?????ݶ??w??{.n?+????{??G?????{ay?ʇڙ?,j??f???h?????????z_??(?階?ݢj"???m??????G????????????&???~???iO???z??v?^?m???? ????????I?


2014-12-15 05:17:35

by Jürgen Groß

[permalink] [raw]
Subject: Re: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")

On 12/14/2014 06:07 AM, ?????? wrote:
>
> Hi,
>
> My Linux virtual machine on (Windows) VMWare workstation 10 can't boot with following commit.
>
> commit bd809af16e3ab1f8d55b3e2928c47c67e2a865d2
> Author: Juergen Gross <[email protected]>
> Date: Mon Nov 3 14:02:03 2014 +0100
>
> x86: Enable PAT to use cache mode translation tables
>
> Unfortunately I can't see any console log.

Hmm, weird. Could you provide some more information?

Kernel config, hardware used, /proc/cpuinfo of working kernel?
Anything you see with earlyprintk enabled?


Juergen

> Reverting the commit fixes my boot issue. git bisect log follows,
>
> $ git bisect log
> git bisect start
> # bad: [92a578b064d0227a3a7fbbdb9e29dbab7f8d400e] Merge tag 'pm+acpi-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
> git bisect bad 92a578b064d0227a3a7fbbdb9e29dbab7f8d400e
> # good: [b2776bf7149bddd1f4161f14f79520f17fc1d71d] Linux 3.18
> git bisect good b2776bf7149bddd1f4161f14f79520f17fc1d71d
> # good: [6da314122ddc11936c6f054753bbb956a499d020] Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
> git bisect good 6da314122ddc11936c6f054753bbb956a499d020
> # good: [482a3767e5087f6e6ad2486a6655aaa5f3d59301] exit: reparent: call forget_original_parent() under tasklist_lock
> git bisect good 482a3767e5087f6e6ad2486a6655aaa5f3d59301
> # bad: [cbfe0de303a55ed96d8831c2d5f56f8131cd6612] Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
> git bisect bad cbfe0de303a55ed96d8831c2d5f56f8131cd6612
> # bad: [a6b849578ef3e0b131b1ea4063473a4f935a65e9] Merge branch 'for-linus' of git://git.samba.org/sfrench/cifs-2.6
> git bisect bad a6b849578ef3e0b131b1ea4063473a4f935a65e9
> # bad: [c9f861c77269bc9950c16c6404a9476062241671] Merge branch 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
> git bisect bad c9f861c77269bc9950c16c6404a9476062241671
> # good: [773fed910d41e443e495a6bfa9ab1c2b7b13e012] Merge branches 'x86-platform-for-linus' and 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
> git bisect good 773fed910d41e443e495a6bfa9ab1c2b7b13e012
> # good: [773fed910d41e443e495a6bfa9ab1c2b7b13e012] Merge branches 'x86-platform-for-linus' and 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
> git bisect good 773fed910d41e443e495a6bfa9ab1c2b7b13e012
> # good: [f439c429c320981943f8b64b2a4049d946cb492b] x86: Support PAT bit in pagetable dump for lower levels
> git bisect good f439c429c320981943f8b64b2a4049d946cb492b
> # good: [e3480271f59253cb60d030aa5e615bf00b731fea] x86, mce, severity: Extend the the mce_severity mechanism to handle UCNA/DEFERRED error
> git bisect good e3480271f59253cb60d030aa5e615bf00b731fea
> # bad: [0dbcae884779fdf7e2239a97ac7488877f0693d9] x86: mm: Move PAT only functions to mm/pat.c
> git bisect bad 0dbcae884779fdf7e2239a97ac7488877f0693d9
> # bad: [bd809af16e3ab1f8d55b3e2928c47c67e2a865d2] x86: Enable PAT to use cache mode translation tables
> git bisect bad bd809af16e3ab1f8d55b3e2928c47c67e2a865d2
> # good: [f5b2831d654167d77da8afbef4d2584897b12d0c] x86: Respect PAT bit when copying pte values between large and normal pages
> git bisect good f5b2831d654167d77da8afbef4d2584897b12d0c
> # first bad commit: [bd809af16e3ab1f8d55b3e2928c47c67e2a865d2] x86: Enable PAT to use cache mode translation tables
>

2014-12-15 07:52:22

by Jongman Heo

[permalink] [raw]
Subject: Re: Re: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")

> ------- Original Message -------
> Sender : Juergen Gross
> Date : 2014-12-15 14:04 (GMT+09:00)
> Title : Re: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")
>
> On 12/14/2014 06:07 AM, ?????? wrote:
> >
> > Hi,
> >
> > My Linux virtual machine on (Windows) VMWare workstation 10 can't boot with following commit.
> >
> > commit bd809af16e3ab1f8d55b3e2928c47c67e2a865d2
> > Author: Juergen Gross
> > Date: Mon Nov 3 14:02:03 2014 +0100
> >
> > x86: Enable PAT to use cache mode translation tables
> >
> > Unfortunately I can't see any console log.
>
> Hmm, weird. Could you provide some more information?
>
> Kernel config, hardware used, /proc/cpuinfo of working kernel?
> Anything you see with earlyprintk enabled?
>
>
> Juergen

(Sorry for resending this email, previous one bounced from mailing list due to HTML format)

Hi,

I'm using Fedora 21, with custom built kernel.
Host PC is windows 7 64-bit, and running VMWare workstation 10 for guest Fedora Linux.

With earlyprintk, just following message is printed.

early console in setup code

and nothing more...


/proc/cpuinfo

processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 58
model name : Intel(R) Core(TM) i7-3740QM CPU @ 2.70GHz
stepping : 9
microcode : 0x17
cpu MHz : 2693.949
cache size : 6144 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fdiv_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss ht nx rdtscp lm constant_tsc arch_perfmon pebs bts xtopology tsc_reliable nonstop_tsc aperfmperf eagerfpu pni pclmulqdq ssse3 cx16 pcid sse4_1 sse4_2 x2apic popcnt aes xsave avx f16c rdrand hypervisor lahf_lm ida arat epb pln pts dtherm fsgsbase smep xsaveopt
bugs :
bogomips : 5387.89
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:

processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 58
model name : Intel(R) Core(TM) i7-3740QM CPU @ 2.70GHz
stepping : 9
microcode : 0x17
cpu MHz : 2693.949
cache size : 6144 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fdiv_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss ht nx rdtscp lm constant_tsc arch_perfmon pebs bts xtopology tsc_reliable nonstop_tsc aperfmperf eagerfpu pni pclmulqdq ssse3 cx16 pcid sse4_1 sse4_2 x2apic popcnt aes xsave avx f16c rdrand hypervisor lahf_lm ida arat epb pln pts dtherm fsgsbase smep xsaveopt
bugs :
bogomips : 5387.89
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:

processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 58
model name : Intel(R) Core(TM) i7-3740QM CPU @ 2.70GHz
stepping : 9
microcode : 0x17
cpu MHz : 2693.949
cache size : 6144 KB
physical id : 1
siblings : 2
core id : 0
cpu cores : 2
apicid : 2
initial apicid : 2
fdiv_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss ht nx rdtscp lm constant_tsc arch_perfmon pebs bts xtopology tsc_reliable nonstop_tsc aperfmperf eagerfpu pni pclmulqdq ssse3 cx16 pcid sse4_1 sse4_2 x2apic popcnt aes xsave avx f16c rdrand hypervisor lahf_lm ida arat epb pln pts dtherm fsgsbase smep xsaveopt
bugs :
bogomips : 5387.89
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:

processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 58
model name : Intel(R) Core(TM) i7-3740QM CPU @ 2.70GHz
stepping : 9
microcode : 0x17
cpu MHz : 2693.949
cache size : 6144 KB
physical id : 1
siblings : 2
core id : 1
cpu cores : 2
apicid : 3
initial apicid : 3
fdiv_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss ht nx rdtscp lm constant_tsc arch_perfmon pebs bts xtopology tsc_reliable nonstop_tsc aperfmperf eagerfpu pni pclmulqdq ssse3 cx16 pcid sse4_1 sse4_2 x2apic popcnt aes xsave avx f16c rdrand hypervisor lahf_lm ida arat epb pln pts dtherm fsgsbase smep xsaveopt
bugs :
bogomips : 5387.89
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:

processor : 4
vendor_id : GenuineIntel
cpu family : 6
model : 58
model name : Intel(R) Core(TM) i7-3740QM CPU @ 2.70GHz
stepping : 9
microcode : 0x17
cpu MHz : 2693.949
cache size : 6144 KB
physical id : 2
siblings : 2
core id : 0
cpu cores : 2
apicid : 4
initial apicid : 4
fdiv_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss ht nx rdtscp lm constant_tsc arch_perfmon pebs bts xtopology tsc_reliable nonstop_tsc aperfmperf eagerfpu pni pclmulqdq ssse3 cx16 pcid sse4_1 sse4_2 x2apic popcnt aes xsave avx f16c rdrand hypervisor lahf_lm ida arat epb pln pts dtherm fsgsbase smep xsaveopt
bugs :
bogomips : 5387.89
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:

processor : 5
vendor_id : GenuineIntel
cpu family : 6
model : 58
model name : Intel(R) Core(TM) i7-3740QM CPU @ 2.70GHz
stepping : 9
microcode : 0x17
cpu MHz : 2693.949
cache size : 6144 KB
physical id : 2
siblings : 2
core id : 1
cpu cores : 2
apicid : 5
initial apicid : 5
fdiv_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss ht nx rdtscp lm constant_tsc arch_perfmon pebs bts xtopology tsc_reliable nonstop_tsc aperfmperf eagerfpu pni pclmulqdq ssse3 cx16 pcid sse4_1 sse4_2 x2apic popcnt aes xsave avx f16c rdrand hypervisor lahf_lm ida arat epb pln pts dtherm fsgsbase smep xsaveopt
bugs :
bogomips : 5387.89
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:

processor : 6
vendor_id : GenuineIntel
cpu family : 6
model : 58
model name : Intel(R) Core(TM) i7-3740QM CPU @ 2.70GHz
stepping : 9
microcode : 0x17
cpu MHz : 2693.949
cache size : 6144 KB
physical id : 3
siblings : 2
core id : 0
cpu cores : 2
apicid : 6
initial apicid : 6
fdiv_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss ht nx rdtscp lm constant_tsc arch_perfmon pebs bts xtopology tsc_reliable nonstop_tsc aperfmperf eagerfpu pni pclmulqdq ssse3 cx16 pcid sse4_1 sse4_2 x2apic popcnt aes xsave avx f16c rdrand hypervisor lahf_lm ida arat epb pln pts dtherm fsgsbase smep xsaveopt
bugs :
bogomips : 5387.89
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:

processor : 7
vendor_id : GenuineIntel
cpu family : 6
model : 58
model name : Intel(R) Core(TM) i7-3740QM CPU @ 2.70GHz
stepping : 9
microcode : 0x17
cpu MHz : 2693.949
cache size : 6144 KB
physical id : 3
siblings : 2
core id : 1
cpu cores : 2
apicid : 7
initial apicid : 7
fdiv_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss ht nx rdtscp lm constant_tsc arch_perfmon pebs bts xtopology tsc_reliable nonstop_tsc aperfmperf eagerfpu pni pclmulqdq ssse3 cx16 pcid sse4_1 sse4_2 x2apic popcnt aes xsave avx f16c rdrand hypervisor lahf_lm ida arat epb pln pts dtherm fsgsbase smep xsaveopt
bugs :
bogomips : 5387.89
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:


lspci output

00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 01)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 01)
00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 08)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 08)
00:07.7 System peripheral: VMware Virtual Machine Communication Interface (rev 10)
00:0f.0 VGA compatible controller: VMware SVGA II Adapter
00:10.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 01)
00:11.0 PCI bridge: VMware PCI bridge (rev 02)
00:15.0 PCI bridge: VMware PCI Express Root Port (rev 01)
00:15.1 PCI bridge: VMware PCI Express Root Port (rev 01)
00:15.2 PCI bridge: VMware PCI Express Root Port (rev 01)
00:15.3 PCI bridge: VMware PCI Express Root Port (rev 01)
00:15.4 PCI bridge: VMware PCI Express Root Port (rev 01)
00:15.5 PCI bridge: VMware PCI Express Root Port (rev 01)
00:15.6 PCI bridge: VMware PCI Express Root Port (rev 01)
00:15.7 PCI bridge: VMware PCI Express Root Port (rev 01)
00:16.0 PCI bridge: VMware PCI Express Root Port (rev 01)
00:16.1 PCI bridge: VMware PCI Express Root Port (rev 01)
00:16.2 PCI bridge: VMware PCI Express Root Port (rev 01)
00:16.3 PCI bridge: VMware PCI Express Root Port (rev 01)
00:16.4 PCI bridge: VMware PCI Express Root Port (rev 01)
00:16.5 PCI bridge: VMware PCI Express Root Port (rev 01)
00:16.6 PCI bridge: VMware PCI Express Root Port (rev 01)
00:16.7 PCI bridge: VMware PCI Express Root Port (rev 01)
00:17.0 PCI bridge: VMware PCI Express Root Port (rev 01)
00:17.1 PCI bridge: VMware PCI Express Root Port (rev 01)
00:17.2 PCI bridge: VMware PCI Express Root Port (rev 01)
00:17.3 PCI bridge: VMware PCI Express Root Port (rev 01)
00:17.4 PCI bridge: VMware PCI Express Root Port (rev 01)
00:17.5 PCI bridge: VMware PCI Express Root Port (rev 01)
00:17.6 PCI bridge: VMware PCI Express Root Port (rev 01)
00:17.7 PCI bridge: VMware PCI Express Root Port (rev 01)
00:18.0 PCI bridge: VMware PCI Express Root Port (rev 01)
00:18.1 PCI bridge: VMware PCI Express Root Port (rev 01)
00:18.2 PCI bridge: VMware PCI Express Root Port (rev 01)
00:18.3 PCI bridge: VMware PCI Express Root Port (rev 01)
00:18.4 PCI bridge: VMware PCI Express Root Port (rev 01)
00:18.5 PCI bridge: VMware PCI Express Root Port (rev 01)
00:18.6 PCI bridge: VMware PCI Express Root Port (rev 01)
00:18.7 PCI bridge: VMware PCI Express Root Port (rev 01)
02:00.0 USB controller: VMware USB1.1 UHCI Controller
02:01.0 Ethernet controller: Advanced Micro Devices, Inc. [AMD] 79c970 [PCnet32 LANCE] (rev 10)
02:02.0 Multimedia audio controller: Ensoniq ES1371 / Creative Labs CT2518 [AudioPCI-97] (rev 02)
02:03.0 USB controller: VMware USB2 EHCI Controller


#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 3.18.0 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
# CONFIG_ZONE_DMA32 is not set
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_INTEL_MPX=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
CONFIG_KERNEL_LZO=y
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_LEGACY_ALLOC_HWIRQ=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
CONFIG_GENERIC_MSI_IRQ=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
# CONFIG_TICK_CPU_ACCOUNTING is not set
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TASKS_RCU is not set
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_NONE is not set
# CONFIG_RCU_NOCB_CPU_ZERO is not set
CONFIG_RCU_NOCB_CPU_ALL=y
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=m
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
# CONFIG_MEMCG is not set
# CONFIG_CGROUP_HUGETLB is not set
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_INIT_FALLBACK=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_PCI_QUIRKS=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_NONE is not set
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
CONFIG_CC_STACKPROTECTOR_STRONG=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
CONFIG_MODULE_SIG_SHA256=y
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha256"
# CONFIG_MODULE_COMPRESS is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_CMDLINE_PARSER is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_AIX_PARTITION=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUE_RWLOCK=y
CONFIG_QUEUE_RWLOCK=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_BIGSMP=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
CONFIG_X86_INTEL_LPSS=y
CONFIG_IOSF_MBI=m
# CONFIG_IOSF_MBI_DEBUG is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_32_NON_STANDARD is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_X86_32_IRIS is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_PARAVIRT_SPINLOCKS is not set
# CONFIG_XEN is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
CONFIG_LGUEST_GUEST=y
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
CONFIG_MCORE2=y
# CONFIG_MATOM is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_NR_CPUS=32
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_VM86=y
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX32=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_MICROCODE_INTEL_EARLY is not set
# CONFIG_MICROCODE_AMD_EARLY is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not set
CONFIG_HIGHMEM64G=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
# CONFIG_NUMA is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NEED_BOUNCE_POOL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
# CONFIG_HWPOISON_INJECT is not set
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
# CONFIG_CMA is not set
CONFIG_ZSWAP=y
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
CONFIG_ZSMALLOC=y
# CONFIG_PGTABLE_MAPPING is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_HIGHPTE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x400000
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x400000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_DPM_WATCHDOG is not set
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_INITRD_TABLE_OVERRIDE=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_BGRT=y
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
# CONFIG_ACPI_APEI_EINJ is not set
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_ACPI_EXTLOG is not set
# CONFIG_PMIC_OPREGION is not set
CONFIG_SFI=y
CONFIG_X86_APM_BOOT=y
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
CONFIG_APM_CPU_IDLE=y
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_ALLOW_INTS is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
CONFIG_X86_POWERNOW_K7=y
CONFIG_X86_POWERNOW_K7_ACPI=y
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_SPEEDSTEP_ICH=y
CONFIG_X86_SPEEDSTEP_SMI=y
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
CONFIG_X86_LONGRUN=y
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y

#
# PCI host controller drivers
#
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_SCx200 is not set
# CONFIG_ALIX is not set
# CONFIG_NET5501 is not set
# CONFIG_GEOS is not set
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
# CONFIG_RAPIDIO is not set
# CONFIG_X86_SYSFB is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_PMC_ATOM=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_NET_IP_TUNNEL is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
# CONFIG_NET_UDP_TUNNEL is not set
# CONFIG_NET_FOU is not set
# CONFIG_GENEVE is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_TCP_CONG_DCTCP is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
CONFIG_IPV6_MIP6=y
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_GRE is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y

#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_ACCT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
CONFIG_NF_CONNTRACK_TIMESTAMP=y
# CONFIG_NF_CT_PROTO_DCCP is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
# CONFIG_NF_CONNTRACK_FTP is not set
# CONFIG_NF_CONNTRACK_H323 is not set
# CONFIG_NF_CONNTRACK_IRC is not set
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
# CONFIG_NF_CONNTRACK_SNMP is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
# CONFIG_NF_CT_NETLINK is not set
# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_FTP is not set
# CONFIG_NF_NAT_IRC is not set
# CONFIG_NF_NAT_SIP is not set
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_REDIRECT is not set
# CONFIG_NF_TABLES is not set
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
# CONFIG_NETFILTER_XT_MARK is not set
# CONFIG_NETFILTER_XT_CONNMARK is not set

#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set
# CONFIG_NETFILTER_XT_TARGET_CT is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
# CONFIG_NETFILTER_XT_TARGET_HL is not set
# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
# CONFIG_NETFILTER_XT_TARGET_LED is not set
# CONFIG_NETFILTER_XT_TARGET_LOG is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_NAT is not set
# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set

#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_BPF is not set
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ECN is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
# CONFIG_NETFILTER_XT_MATCH_HL is not set
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
# CONFIG_NF_LOG_ARP is not set
# CONFIG_NF_LOG_IPV4 is not set
CONFIG_NF_REJECT_IPV4=y
CONFIG_NF_NAT_IPV4=m
# CONFIG_NF_NAT_MASQUERADE_IPV4 is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_RPFILTER is not set
# CONFIG_IP_NF_MATCH_TTL is not set
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
# CONFIG_IP_NF_TARGET_SYNPROXY is not set
# CONFIG_IP_NF_NAT is not set
CONFIG_IP_NF_MANGLE=m
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
# CONFIG_IP_NF_TARGET_ECN is not set
# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
# CONFIG_IP_NF_ARPTABLES is not set

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NF_REJECT_IPV6=m
# CONFIG_NF_LOG_IPV6 is not set
CONFIG_NF_NAT_IPV6=m
# CONFIG_NF_NAT_MASQUERADE_IPV6 is not set
CONFIG_IP6_NF_IPTABLES=m
# CONFIG_IP6_NF_MATCH_AH is not set
# CONFIG_IP6_NF_MATCH_EUI64 is not set
# CONFIG_IP6_NF_MATCH_FRAG is not set
# CONFIG_IP6_NF_MATCH_OPTS is not set
# CONFIG_IP6_NF_MATCH_HL is not set
# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_RPFILTER=m
# CONFIG_IP6_NF_MATCH_RT is not set
# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
# CONFIG_IP6_NF_TARGET_SYNPROXY is not set
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
# CONFIG_IP6_NF_NAT is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
# CONFIG_NET_SCH_FQ_CODEL is not set
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
# CONFIG_NET_SCH_INGRESS is not set
# CONFIG_NET_SCH_PLUG is not set

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_CLS_CGROUP=y
# CONFIG_NET_CLS_BPF is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_ACT_CSUM is not set
# CONFIG_NET_ACT_VLAN is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
CONFIG_NETLINK_MMAP=y
# CONFIG_NETLINK_DIAG is not set
# CONFIG_NET_MPLS_GSO is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
CONFIG_NET_DROP_MONITOR=y
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_FENCE_TRACE is not set

#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_ZRAM is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_VIRTIO_BLK is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set

#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
CONFIG_VMWARE_BALLOON=m
# CONFIG_BMP085_I2C is not set
# CONFIG_BMP085_SPI is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
# CONFIG_INTEL_MEI is not set
# CONFIG_INTEL_MEI_ME is not set
# CONFIG_INTEL_MEI_TXE is not set
CONFIG_VMWARE_VMCI=m

#
# Intel MIC Bus Driver
#

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_MQ_DEFAULT=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_VIRTIO is not set
# CONFIG_SCSI_CHELSIO_FCOE is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_SCSI_DH=y
# CONFIG_SCSI_DH_RDAC is not set
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not set
# CONFIG_SCSI_DH_ALUA is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=m
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=y
# CONFIG_DM_CRYPT is not set
CONFIG_DM_SNAPSHOT=y
# CONFIG_DM_THIN_PROVISIONING is not set
# CONFIG_DM_CACHE is not set
# CONFIG_DM_ERA is not set
CONFIG_DM_MIRROR=y
# CONFIG_DM_LOG_USERSPACE is not set
# CONFIG_DM_RAID is not set
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_TARGET_CORE is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=40
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LAN is not set
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
CONFIG_NET_FC=y
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_VIRTIO_NET is not set
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set

#
# CAIF transport drivers
#
# CONFIG_VHOST_NET is not set

#
# Distributed Switch Architecture drivers
#
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
# CONFIG_NET_DSA_MV88E6171 is not set
# CONFIG_NET_DSA_MV88E6352 is not set
# CONFIG_NET_DSA_BCM_SF2 is not set
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
CONFIG_PCNET32=y
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_NET_XGENE is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_FUJITSU is not set
# CONFIG_NET_VENDOR_HP is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_IP1000 is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_PACKET_ENGINE is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_NET_VENDOR_REALTEK is not set
# CONFIG_NET_VENDOR_RDC is not set
CONFIG_NET_VENDOR_ROCKER=y
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_SFC is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_NET_VENDOR_XIRCOM is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_AT803X_PHY is not set
# CONFIG_AMD_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_USB_NET_DRIVERS is not set
# CONFIG_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
CONFIG_VMXNET3=y
# CONFIG_ISDN is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_HANWANG is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_SUR40 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_PWM_BEEPER is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_NOZOMI is not set
# CONFIG_ISI is not set
# CONFIG_N_HDLC is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_FINTEK is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_KGDB_NMI is not set
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set

#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
CONFIG_I2C_PIIX4=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_TOPCLIFF_PCH is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
# CONFIG_DP83640_PHY is not set
# CONFIG_PTP_1588_CLOCK_PCH is not set
CONFIG_PINCTRL=y

#
# Pin controllers
#
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_BAYTRAIL=y
# CONFIG_PINCTRL_CHERRYVIEW is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_F7188X is not set
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_ICH is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_LYNXPOINT is not set

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_ADP5588 is not set

#
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_INTEL_MID is not set
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set

#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set

#
# AC97 GPIO expanders:
#

#
# LPC GPIO expanders:
#

#
# MODULbus GPIO expanders:
#

#
# USB GPIO expanders:
#
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_SMB347 is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7314 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_CORETEMP=m
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_HTU21 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_INTEL_POWERCLAMP is not set
# CONFIG_X86_PKG_TEMP_THERMAL is not set
# CONFIG_INTEL_SOC_DTS_THERMAL is not set
# CONFIG_INT340X_THERMAL is not set

#
# Texas Instruments thermal drivers
#
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_IE6XX_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC7240_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_VIA_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
# CONFIG_MEN_A21_WDT is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_CS5535 is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RTSX_PCI is not set
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS65912 is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TIMBERDALE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_ALI=y
CONFIG_AGP_ATI=y
CONFIG_AGP_AMD=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_NVIDIA=y
CONFIG_AGP_SIS=y
CONFIG_AGP_SWORKS=y
CONFIG_AGP_VIA=y
CONFIG_AGP_EFFICEON=y
CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_SWITCHEROO=y

#
# Direct Rendering Manager
#
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_TTM=m

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_PTN3460 is not set
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_VMWGFX_FBCON=y
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_BOCHS is not set

#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
# CONFIG_FB_DDC is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=y
CONFIG_FB_GEODE_GX=y
# CONFIG_FB_GEODE_GX1 is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_SIMPLE is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PWM is not set
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_VGASTATE is not set
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_HRTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set

#
# HD-Audio
#
# CONFIG_SND_HDA_INTEL is not set
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_USB_6FIRE is not set
# CONFIG_SND_USB_HIFACE is not set
# CONFIG_SND_BCD2000 is not set
# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CP2112 is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_HUION is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LOGITECH is not set
CONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_NTRIG=y
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set

#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_OTG_FSM is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FUSBH200_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set

#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_GADGET is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_DECODE_MCE is not set
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
# CONFIG_RTC_SYSTOHC is not set
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12057 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_MCP795 is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_XGENE is not set

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_DW_DMAC_CORE is not set
# CONFIG_DW_DMAC is not set
# CONFIG_DW_DMAC_PCI is not set
# CONFIG_PCH_DMA is not set
CONFIG_DMA_ACPI=y
CONFIG_AUXDISPLAY=y
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y

#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
CONFIG_STAGING=y
# CONFIG_SLICOSS is not set
# CONFIG_COMEDI is not set
# CONFIG_RTS5208 is not set
# CONFIG_LINE6_USB is not set
# CONFIG_FB_XGI is not set
# CONFIG_BCM_WIMAX is not set
# CONFIG_FT1000 is not set

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
CONFIG_STAGING_MEDIA=y

#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_USB_WPAN_HCD is not set
# CONFIG_WIMAX_GDM72XX is not set
# CONFIG_LTE_GDM724X is not set
# CONFIG_LUSTRE_FS is not set
# CONFIG_DGNC is not set
# CONFIG_DGAP is not set
# CONFIG_GS_FPGABOOT is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_SMO8800 is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WIRELESS is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_IBM_RTL is not set
# CONFIG_SAMSUNG_LAPTOP is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set
# CONFIG_INTEL_RST is not set
CONFIG_INTEL_SMARTCONNECT=y
# CONFIG_PVPANIC is not set
CONFIG_CHROME_PLATFORMS=y
# CONFIG_CHROMEOS_LAPTOP is not set
# CONFIG_CHROMEOS_PSTORE is not set

#
# SOC (System On Chip) specific Drivers
#
# CONFIG_SOC_TI is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_PXA is not set

#
# Hardware Spinlock drivers
#

#
# Clock Source drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y

#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set

#
# Rpmsg drivers
#

#
# SOC (System On Chip) specific Drivers
#
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_LPSS is not set
# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_FMC is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
CONFIG_RAS=y
# CONFIG_THUNDERBOLT is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
# CONFIG_ISCSI_IBFT is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_VARS_PSTORE=y
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_RUNTIME_MAP=y
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_UEFI_CPER=y

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT23=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=m
# CONFIG_BTRFS_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
CONFIG_FSCACHE=y
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_FILE_CACHE is not set
CONFIG_SQUASHFS_FILE_DIRECT=y
# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_FTRACE is not set
# CONFIG_PSTORE_RAM is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_EFIVAR_FS=y
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_SWAP is not set
# CONFIG_NFS_V4_1 is not set
# CONFIG_NFS_FSCACHE is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
# CONFIG_NFSD_V4_SECURITY_LABEL is not set
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=y
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DFS_UPCALL is not set
CONFIG_CIFS_SMB2=y
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
CONFIG_NLS_CODEPAGE_949=y
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x0
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_VMACACHE is not set
# CONFIG_DEBUG_VM_RB is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_DEBUG_HIGHMEM=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_DEBUG_SHIRQ=y

#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_TIMER_STATS=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
CONFIG_SPARSE_RCU_POINTER=y
# CONFIG_TORTURE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
# CONFIG_FUNCTION_GRAPH_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
CONFIG_UPROBE_EVENT=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set

#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_KSTRTOX=y
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
CONFIG_BUILD_DOCSRC=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
CONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
CONFIG_KGDB_LOW_LEVEL_TRAP=y
CONFIG_KGDB_KDB=y
CONFIG_KDB_KEYBOARD=y
CONFIG_KDB_CONTINUE_CATASTROPHIC=0
CONFIG_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_EARLY_PRINTK_EFI=y
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_RODATA_TEST=y
CONFIG_DEBUG_SET_MODULE_RONX=y
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
# CONFIG_INTEL_TXT is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set
# CONFIG_INTEGRITY is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_XOR_BLOCKS=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
# CONFIG_CRYPTO_MCRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_ABLK_HELPER=y

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=y

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
# CONFIG_CRYPTO_CRC32 is not set
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_CRCT10DIF=y
# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_AES_NI_INTEL=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_586 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_DRBG_MENU is not set
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
CONFIG_CRYPTO_DEV_CCP=y
# CONFIG_CRYPTO_DEV_CCP_DD is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_PUBLIC_KEY_ALGO_RSA=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS7_MESSAGE_PARSER is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_INTEL=y
# CONFIG_KVM_AMD is not set
# CONFIG_KVM_MMU_AUDIT is not set
CONFIG_KVM_DEVICE_ASSIGNMENT=y
# CONFIG_LGUEST is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_PERCPU_RWSEM=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
# CONFIG_CRC8 is not set
CONFIG_AUDIT_GENERIC=y
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
CONFIG_CLZ_TAB=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_ARCH_HAS_SG_CHAIN=y

????{.n?+???????+%?????ݶ??w??{.n?+????{??G?????{ay?ʇڙ?,j??f???h?????????z_??(?階?ݢj"???m??????G????????????&???~???iO???z??v?^?m???? ????????I?

2014-12-15 11:52:25

by Jürgen Groß

[permalink] [raw]
Subject: Re: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")

On 12/15/2014 08:52 AM, Jongman Heo wrote:
>> ------- Original Message -------
>> Sender : Juergen Gross
>> Date : 2014-12-15 14:04 (GMT+09:00)
>> Title : Re: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")
>>
>> On 12/14/2014 06:07 AM, ?????? wrote:
>>>
>>> Hi,
>>>
>>> My Linux virtual machine on (Windows) VMWare workstation 10 can't boot with following commit.
>>>
>>> commit bd809af16e3ab1f8d55b3e2928c47c67e2a865d2
>>> Author: Juergen Gross
>>> Date: Mon Nov 3 14:02:03 2014 +0100
>>>
>>> x86: Enable PAT to use cache mode translation tables
>>>
>>> Unfortunately I can't see any console log.
>>
>> Hmm, weird. Could you provide some more information?
>>
>> Kernel config, hardware used, /proc/cpuinfo of working kernel?
>> Anything you see with earlyprintk enabled?
>>
>>
>> Juergen
>
> (Sorry for resending this email, previous one bounced from mailing list due to HTML format)
>
> Hi,
>
> I'm using Fedora 21, with custom built kernel.
> Host PC is windows 7 64-bit, and running VMWare workstation 10 for guest Fedora Linux.
>
> With earlyprintk, just following message is printed.
>
> early console in setup code
>
> and nothing more...

Can you try attached diagnostic patch, please? I suspect a problem
regarding VMWares PAT emulation...


Juergen


Attachments:
diag.patch (569.00 B)

2014-12-16 04:40:14

by Jongman Heo

[permalink] [raw]
Subject: Re: Re: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")

>------- Original Message -------
>Sender : Juergen Gross<[email protected]>
>Date : 2014-12-15 20:52 (GMT+09:00)
>Title : Re: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")
>
>On 12/15/2014 08:52 AM, Jongman Heo wrote:
>>> ------- Original Message -------
>>> Sender : Juergen Gross
>>> Date : 2014-12-15 14:04 (GMT+09:00)
>>> Title : Re: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")
>>>
>>> On 12/14/2014 06:07 AM, ?????? wrote:
>>>>
>>>> Hi,
>>>>
>>>> My Linux virtual machine on (Windows) VMWare workstation 10 can't boot with following commit.
>>>>
>>>> commit bd809af16e3ab1f8d55b3e2928c47c67e2a865d2
>>>> Author: Juergen Gross
>>>> Date: Mon Nov 3 14:02:03 2014 +0100
>>>>
>>>> x86: Enable PAT to use cache mode translation tables
>>>>
>>>> Unfortunately I can't see any console log.
>>>
>>> Hmm, weird. Could you provide some more information?
>>>
>>> Kernel config, hardware used, /proc/cpuinfo of working kernel?
>>> Anything you see with earlyprintk enabled?
>>>
>>>
>>> Juergen
>>
>> (Sorry for resending this email, previous one bounced from mailing list due to HTML format)
>>
>> Hi,
>>
>> I'm using Fedora 21, with custom built kernel.
>> Host PC is windows 7 64-bit, and running VMWare workstation 10 for guest Fedora Linux.
>>
>> With earlyprintk, just following message is printed.
>>
>> early console in setup code
>>
>> and nothing more...
>
> Can you try attached diagnostic patch, please? I suspect a problem
> regarding VMWares PAT emulation...
>
>
> Juergen

Hi,

With the commit reverted, the patch doesn't apply.
Without revert, kernel (patch applied) doesn't boot and I can't see any message.

Let me show you my PAT values (the commit reverted)

# dmesg | grep PAT
[ 0.000000] x86 PAT enabled: cpu 0, old 0x0, new 0x7010600070106
[ 0.314631] x86 PAT enabled: cpu 3, old 0x0, new 0x7010600070106
[ 0.314703] x86 PAT enabled: cpu 1, old 0x0, new 0x7010600070106
[ 0.314780] x86 PAT enabled: cpu 2, old 0x0, new 0x7010600070106
[ 0.314852] x86 PAT enabled: cpu 4, old 0x0, new 0x7010600070106
[ 0.314923] x86 PAT enabled: cpu 0, old 0x0, new 0x7010600070106
[ 0.314997] x86 PAT enabled: cpu 6, old 0x0, new 0x7010600070106
[ 0.315069] x86 PAT enabled: cpu 7, old 0x0, new 0x7010600070106
[ 0.315142] x86 PAT enabled: cpu 5, old 0x0, new 0x7010600070106
????{.n?+???????+%?????ݶ??w??{.n?+????{??G?????{ay?ʇڙ?,j??f???h?????????z_??(?階?ݢj"???m??????G????????????&???~???iO???z??v?^?m???? ????????I?

2014-12-16 05:14:31

by Jürgen Groß

[permalink] [raw]
Subject: Re: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")

On 12/16/2014 05:40 AM, Jongman Heo wrote:
>> ------- Original Message -------
>> Sender : Juergen Gross<[email protected]>
>> Date : 2014-12-15 20:52 (GMT+09:00)
>> Title : Re: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")
>>
>> On 12/15/2014 08:52 AM, Jongman Heo wrote:
>>>> ------- Original Message -------
>>>> Sender : Juergen Gross
>>>> Date : 2014-12-15 14:04 (GMT+09:00)
>>>> Title : Re: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")
>>>>
>>>> On 12/14/2014 06:07 AM, ?????? wrote:
>>>>>
>>>>> Hi,
>>>>>
>>>>> My Linux virtual machine on (Windows) VMWare workstation 10 can't boot with following commit.
>>>>>
>>>>> commit bd809af16e3ab1f8d55b3e2928c47c67e2a865d2
>>>>> Author: Juergen Gross
>>>>> Date: Mon Nov 3 14:02:03 2014 +0100
>>>>>
>>>>> x86: Enable PAT to use cache mode translation tables
>>>>>
>>>>> Unfortunately I can't see any console log.
>>>>
>>>> Hmm, weird. Could you provide some more information?
>>>>
>>>> Kernel config, hardware used, /proc/cpuinfo of working kernel?
>>>> Anything you see with earlyprintk enabled?
>>>>
>>>>
>>>> Juergen
>>>
>>> (Sorry for resending this email, previous one bounced from mailing list due to HTML format)
>>>
>>> Hi,
>>>
>>> I'm using Fedora 21, with custom built kernel.
>>> Host PC is windows 7 64-bit, and running VMWare workstation 10 for guest Fedora Linux.
>>>
>>> With earlyprintk, just following message is printed.
>>>
>>> early console in setup code
>>>
>>> and nothing more...
>>
>> Can you try attached diagnostic patch, please? I suspect a problem
>> regarding VMWares PAT emulation...
>>
>>
>> Juergen
>
> Hi,
>
> With the commit reverted, the patch doesn't apply.

Sure.

> Without revert, kernel (patch applied) doesn't boot and I can't see any message.

What are your kernel parameters? There must be some message with the
diagnostic patch, as the first pr_info() is called before any other
part of the critical patch is becoming active. Could it be you have
instructed the kernel to be "quiet"? I'd recommend:

earlyprintk=vga ignore_loglevel

and no quiet. I don't know VMWare settings, so may be you can use
earlyprintk=ttyS0 instead of vga.

>
> Let me show you my PAT values (the commit reverted)
>
> # dmesg | grep PAT
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x0, new 0x7010600070106
> [ 0.314631] x86 PAT enabled: cpu 3, old 0x0, new 0x7010600070106
> [ 0.314703] x86 PAT enabled: cpu 1, old 0x0, new 0x7010600070106
> [ 0.314780] x86 PAT enabled: cpu 2, old 0x0, new 0x7010600070106
> [ 0.314852] x86 PAT enabled: cpu 4, old 0x0, new 0x7010600070106
> [ 0.314923] x86 PAT enabled: cpu 0, old 0x0, new 0x7010600070106
> [ 0.314997] x86 PAT enabled: cpu 6, old 0x0, new 0x7010600070106
> [ 0.315069] x86 PAT enabled: cpu 7, old 0x0, new 0x7010600070106
> [ 0.315142] x86 PAT enabled: cpu 5, old 0x0, new 0x7010600070106

These are the expected values. But these values are the ones which are
written, not the ones which have been read from the PAT MSR again.

Without applying the critical patch you could add:

rdmsrl(MSR_IA32_CR_PAT, pat);
printk(KERN_INFO "PAT read: cpu %d, 0x%Lx\n", smp_processor_id(), pat);

at the end of pat_init() to verify VMWare is handling reads of the PAT
MSR properly.

Juergen

2014-12-16 06:29:42

by Jongman Heo

[permalink] [raw]
Subject: Re: Re: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")

>
>------- Original Message -------
>Sender : Juergen Gross<[email protected]>
>Date : 2014-12-16 14:14 (GMT+09:00)
>Title : Re: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")
>
>On 12/16/2014 05:40 AM, Jongman Heo wrote:
>>> ------- Original Message -------
>>> Sender : Juergen Gross
>>> Date : 2014-12-15 20:52 (GMT+09:00)
>>> Title : Re: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")
>>>
>>> On 12/15/2014 08:52 AM, Jongman Heo wrote:
>>>>> ------- Original Message -------
>>>>> Sender : Juergen Gross
>>>>> Date : 2014-12-15 14:04 (GMT+09:00)
>>>>> Title : Re: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")
>>>>>
>>>>> On 12/14/2014 06:07 AM, ?????? wrote:
>>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> My Linux virtual machine on (Windows) VMWare workstation 10 can't boot with following commit.
>>>>>>
>>>>>> commit bd809af16e3ab1f8d55b3e2928c47c67e2a865d2
>>>>>> Author: Juergen Gross
>>>>>> Date: Mon Nov 3 14:02:03 2014 +0100
>>>>>>
>>>>>> x86: Enable PAT to use cache mode translation tables
>>>>>>
>>>>>> Unfortunately I can't see any console log.
>>>>>
>>>>> Hmm, weird. Could you provide some more information?
>>>>>
>>>>> Kernel config, hardware used, /proc/cpuinfo of working kernel?
>>>>> Anything you see with earlyprintk enabled?
>>>>>
>>>>>
>>>>> Juergen
>>>>
>>>> (Sorry for resending this email, previous one bounced from mailing list due to HTML format)
>>>>
>>>> Hi,
>>>>
>>>> I'm using Fedora 21, with custom built kernel.
>>>> Host PC is windows 7 64-bit, and running VMWare workstation 10 for guest Fedora Linux.
>>>>
>>>> With earlyprintk, just following message is printed.
>>>>
>>>> early console in setup code
>>>>
>>>> and nothing more...
>>>
>>> Can you try attached diagnostic patch, please? I suspect a problem
>>> regarding VMWares PAT emulation...
>>>
>>>
>>> Juergen
>>
>> Hi,
>>
>> With the commit reverted, the patch doesn't apply.
>
>Sure.
>
>> Without revert, kernel (patch applied) doesn't boot and I can't see any message.
>
>What are your kernel parameters? There must be some message with the
>diagnostic patch, as the first pr_info() is called before any other
>part of the critical patch is becoming active. Could it be you have
>instructed the kernel to be "quiet"? I'd recommend:
>
>earlyprintk=vga ignore_loglevel
>
>and no quiet. I don't know VMWare settings, so may be you can use
>earlyprintk=ttyS0 instead of vga.
>
>>
>> Let me show you my PAT values (the commit reverted)
>>
>> # dmesg | grep PAT
>> [ 0.000000] x86 PAT enabled: cpu 0, old 0x0, new 0x7010600070106
>> [ 0.314631] x86 PAT enabled: cpu 3, old 0x0, new 0x7010600070106
>> [ 0.314703] x86 PAT enabled: cpu 1, old 0x0, new 0x7010600070106
>> [ 0.314780] x86 PAT enabled: cpu 2, old 0x0, new 0x7010600070106
>> [ 0.314852] x86 PAT enabled: cpu 4, old 0x0, new 0x7010600070106
>> [ 0.314923] x86 PAT enabled: cpu 0, old 0x0, new 0x7010600070106
>> [ 0.314997] x86 PAT enabled: cpu 6, old 0x0, new 0x7010600070106
>> [ 0.315069] x86 PAT enabled: cpu 7, old 0x0, new 0x7010600070106
>> [ 0.315142] x86 PAT enabled: cpu 5, old 0x0, new 0x7010600070106
>
>These are the expected values. But these values are the ones which are
>written, not the ones which have been read from the PAT MSR again.
>
>Without applying the critical patch you could add:
>
>rdmsrl(MSR_IA32_CR_PAT, pat);
>printk(KERN_INFO "PAT read: cpu %d, 0x%Lx\n", smp_processor_id(), pat);
>
>at the end of pat_init() to verify VMWare is handling reads of the PAT
>MSR properly.
>
>Juergen
>

Hi,

With earlyprintk=vga, I can see the log.
But due to call trace, I can't see what the pat value is.

Call chain is as follows.

i386_start_kernel -> start_kernel -> setup_arch ->
mtrr_bp_init -> get_mtrr_state -> pat_init ->
pat_init_cache_mode_entry -> update_cache_mode_entry ->
early_idt_handler -> dump_stack

So, I blocked update_cache_mode_entry() call like below...

--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -182,11 +182,12 @@ void pat_init_cache_modes(void)
u64 pat;

rdmsrl(MSR_IA32_CR_PAT, pat);
+ pr_info("read pat %0llx\n", pat);
pat_msg[32] = 0;
for (i = 7; i >= 0; i--) {
cache = pat_get_cache_mode((pat >> (i * 8)) & 7,
pat_msg + 4 * i);
- update_cache_mode_entry(i, cache);
+ //update_cache_mode_entry(i, cache);
}
pr_info("PAT configuration [0-7]: %s\n", pat_msg);
}
@@ -238,9 +239,13 @@ void pat_init(void)
rdmsrl(MSR_IA32_CR_PAT, boot_pat_state);

wrmsrl(MSR_IA32_CR_PAT, pat);
+ pr_info("about to write pat %0llx\n", pat);

if (boot_cpu)
pat_init_cache_modes();
+
+ rdmsrl(MSR_IA32_CR_PAT, pat);
+ printk(KERN_INFO "PAT read: cpu %d, 0x%Lx\n", smp_processor_id(), pat);
}


Then boot is fine, and PAT values are as follows.


# dmesg|grep -i "pat "
[ 0.000000] about to write pat 7010600070106
[ 0.000000] read pat 0
[ 0.000000] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
[ 0.000000] PAT read: cpu 0, 0x0
[ 0.320559] about to write pat 7010600070106
[ 0.320876] read pat 0
[ 0.321090] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
[ 0.321260] PAT read: cpu 5, 0x0
[ 0.321403] about to write pat 7010600070106
[ 0.321818] read pat 0
[ 0.322033] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
[ 0.322205] PAT read: cpu 6, 0x0
[ 0.322334] about to write pat 7010600070106
[ 0.322417] read pat 0
[ 0.322479] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
[ 0.322573] PAT read: cpu 0, 0x0
[ 0.322703] about to write pat 7010600070106
[ 0.323012] read pat 0
[ 0.323228] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
[ 0.323400] PAT read: cpu 1, 0x0
[ 0.323537] about to write pat 7010600070106
[ 0.323833] read pat 0
[ 0.324055] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
[ 0.324224] PAT read: cpu 7, 0x0
[ 0.324362] about to write pat 7010600070106
[ 0.324662] read pat 0
[ 0.324877] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
[ 0.325048] PAT read: cpu 2, 0x0
[ 0.325185] about to write pat 7010600070106
[ 0.325483] read pat 0
[ 0.325695] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
[ 0.325863] PAT read: cpu 4, 0x0
[ 0.325997] about to write pat 7010600070106
[ 0.326288] read pat 0
[ 0.326507] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
[ 0.326677] PAT read: cpu 3, 0x0
????{.n?+???????+%?????ݶ??w??{.n?+????{??G?????{ay?ʇڙ?,j??f???h?????????z_??(?階?ݢj"???m??????G????????????&???~???iO???z??v?^?m???? ????????I?

2014-12-16 06:36:28

by Jürgen Groß

[permalink] [raw]
Subject: Re: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")

On 12/16/2014 07:29 AM, Jongman Heo wrote:
>>
>> ------- Original Message -------
>> Sender : Juergen Gross<[email protected]>
>> Date : 2014-12-16 14:14 (GMT+09:00)
>> Title : Re: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")
>>
>> On 12/16/2014 05:40 AM, Jongman Heo wrote:
>>>> ------- Original Message -------
>>>> Sender : Juergen Gross
>>>> Date : 2014-12-15 20:52 (GMT+09:00)
>>>> Title : Re: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")
>>>>
>>>> On 12/15/2014 08:52 AM, Jongman Heo wrote:
>>>>>> ------- Original Message -------
>>>>>> Sender : Juergen Gross
>>>>>> Date : 2014-12-15 14:04 (GMT+09:00)
>>>>>> Title : Re: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")
>>>>>>
>>>>>> On 12/14/2014 06:07 AM, ?????? wrote:
>>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>> My Linux virtual machine on (Windows) VMWare workstation 10 can't boot with following commit.
>>>>>>>
>>>>>>> commit bd809af16e3ab1f8d55b3e2928c47c67e2a865d2
>>>>>>> Author: Juergen Gross
>>>>>>> Date: Mon Nov 3 14:02:03 2014 +0100
>>>>>>>
>>>>>>> x86: Enable PAT to use cache mode translation tables
>>>>>>>
>>>>>>> Unfortunately I can't see any console log.
>>>>>>
>>>>>> Hmm, weird. Could you provide some more information?
>>>>>>
>>>>>> Kernel config, hardware used, /proc/cpuinfo of working kernel?
>>>>>> Anything you see with earlyprintk enabled?
>>>>>>
>>>>>>
>>>>>> Juergen
>>>>>
>>>>> (Sorry for resending this email, previous one bounced from mailing list due to HTML format)
>>>>>
>>>>> Hi,
>>>>>
>>>>> I'm using Fedora 21, with custom built kernel.
>>>>> Host PC is windows 7 64-bit, and running VMWare workstation 10 for guest Fedora Linux.
>>>>>
>>>>> With earlyprintk, just following message is printed.
>>>>>
>>>>> early console in setup code
>>>>>
>>>>> and nothing more...
>>>>
>>>> Can you try attached diagnostic patch, please? I suspect a problem
>>>> regarding VMWares PAT emulation...
>>>>
>>>>
>>>> Juergen
>>>
>>> Hi,
>>>
>>> With the commit reverted, the patch doesn't apply.
>>
>> Sure.
>>
>>> Without revert, kernel (patch applied) doesn't boot and I can't see any message.
>>
>> What are your kernel parameters? There must be some message with the
>> diagnostic patch, as the first pr_info() is called before any other
>> part of the critical patch is becoming active. Could it be you have
>> instructed the kernel to be "quiet"? I'd recommend:
>>
>> earlyprintk=vga ignore_loglevel
>>
>> and no quiet. I don't know VMWare settings, so may be you can use
>> earlyprintk=ttyS0 instead of vga.
>>
>>>
>>> Let me show you my PAT values (the commit reverted)
>>>
>>> # dmesg | grep PAT
>>> [ 0.000000] x86 PAT enabled: cpu 0, old 0x0, new 0x7010600070106
>>> [ 0.314631] x86 PAT enabled: cpu 3, old 0x0, new 0x7010600070106
>>> [ 0.314703] x86 PAT enabled: cpu 1, old 0x0, new 0x7010600070106
>>> [ 0.314780] x86 PAT enabled: cpu 2, old 0x0, new 0x7010600070106
>>> [ 0.314852] x86 PAT enabled: cpu 4, old 0x0, new 0x7010600070106
>>> [ 0.314923] x86 PAT enabled: cpu 0, old 0x0, new 0x7010600070106
>>> [ 0.314997] x86 PAT enabled: cpu 6, old 0x0, new 0x7010600070106
>>> [ 0.315069] x86 PAT enabled: cpu 7, old 0x0, new 0x7010600070106
>>> [ 0.315142] x86 PAT enabled: cpu 5, old 0x0, new 0x7010600070106
>>
>> These are the expected values. But these values are the ones which are
>> written, not the ones which have been read from the PAT MSR again.
>>
>> Without applying the critical patch you could add:
>>
>> rdmsrl(MSR_IA32_CR_PAT, pat);
>> printk(KERN_INFO "PAT read: cpu %d, 0x%Lx\n", smp_processor_id(), pat);
>>
>> at the end of pat_init() to verify VMWare is handling reads of the PAT
>> MSR properly.
>>
>> Juergen
>>
>
> Hi,
>
> With earlyprintk=vga, I can see the log.
> But due to call trace, I can't see what the pat value is.
>
> Call chain is as follows.
>
> i386_start_kernel -> start_kernel -> setup_arch ->
> mtrr_bp_init -> get_mtrr_state -> pat_init ->
> pat_init_cache_mode_entry -> update_cache_mode_entry ->
> early_idt_handler -> dump_stack
>
> So, I blocked update_cache_mode_entry() call like below...
>
> --- a/arch/x86/mm/pat.c
> +++ b/arch/x86/mm/pat.c
> @@ -182,11 +182,12 @@ void pat_init_cache_modes(void)
> u64 pat;
>
> rdmsrl(MSR_IA32_CR_PAT, pat);
> + pr_info("read pat %0llx\n", pat);
> pat_msg[32] = 0;
> for (i = 7; i >= 0; i--) {
> cache = pat_get_cache_mode((pat >> (i * 8)) & 7,
> pat_msg + 4 * i);
> - update_cache_mode_entry(i, cache);
> + //update_cache_mode_entry(i, cache);
> }
> pr_info("PAT configuration [0-7]: %s\n", pat_msg);
> }
> @@ -238,9 +239,13 @@ void pat_init(void)
> rdmsrl(MSR_IA32_CR_PAT, boot_pat_state);
>
> wrmsrl(MSR_IA32_CR_PAT, pat);
> + pr_info("about to write pat %0llx\n", pat);
>
> if (boot_cpu)
> pat_init_cache_modes();
> +
> + rdmsrl(MSR_IA32_CR_PAT, pat);
> + printk(KERN_INFO "PAT read: cpu %d, 0x%Lx\n", smp_processor_id(), pat);
> }
>
>
> Then boot is fine, and PAT values are as follows.
>
>
> # dmesg|grep -i "pat "
> [ 0.000000] about to write pat 7010600070106
> [ 0.000000] read pat 0
> [ 0.000000] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
> [ 0.000000] PAT read: cpu 0, 0x0
> [ 0.320559] about to write pat 7010600070106
> [ 0.320876] read pat 0
> [ 0.321090] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
> [ 0.321260] PAT read: cpu 5, 0x0
> [ 0.321403] about to write pat 7010600070106
> [ 0.321818] read pat 0
> [ 0.322033] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
> [ 0.322205] PAT read: cpu 6, 0x0
> [ 0.322334] about to write pat 7010600070106
> [ 0.322417] read pat 0
> [ 0.322479] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
> [ 0.322573] PAT read: cpu 0, 0x0
> [ 0.322703] about to write pat 7010600070106
> [ 0.323012] read pat 0
> [ 0.323228] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
> [ 0.323400] PAT read: cpu 1, 0x0
> [ 0.323537] about to write pat 7010600070106
> [ 0.323833] read pat 0
> [ 0.324055] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
> [ 0.324224] PAT read: cpu 7, 0x0
> [ 0.324362] about to write pat 7010600070106
> [ 0.324662] read pat 0
> [ 0.324877] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
> [ 0.325048] PAT read: cpu 2, 0x0
> [ 0.325185] about to write pat 7010600070106
> [ 0.325483] read pat 0
> [ 0.325695] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
> [ 0.325863] PAT read: cpu 4, 0x0
> [ 0.325997] about to write pat 7010600070106
> [ 0.326288] read pat 0
> [ 0.326507] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
> [ 0.326677] PAT read: cpu 3, 0x0

Okay, so VMWare doesn't seem to return the correct PAT MSR value.

I suggest you try "nopat" as kernel option. This should disable all the
PAT handling and VMWare can't wreck the kernel this way.

I'll write a patch which detects this VMWare bug by checking the PAT
value after writing it.

Thanks for reporting that case,


Juergen

2014-12-16 06:46:35

by Jongman Heo

[permalink] [raw]
Subject: Re: Re: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")

>------- Original Message -------
>Sender : Juergen Gross<[email protected]>
>Date : 2014-12-16 15:36 (GMT+09:00)
>Title : Re: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")
>
>On 12/16/2014 07:29 AM, Jongman Heo wrote:
>>>
>>> ------- Original Message -------
>>> Sender : Juergen Gross
>>> Date : 2014-12-16 14:14 (GMT+09:00)
>>> Title : Re: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")
>>>
>>> On 12/16/2014 05:40 AM, Jongman Heo wrote:
>>>>> ------- Original Message -------
>>>>> Sender : Juergen Gross
>>>>> Date : 2014-12-15 20:52 (GMT+09:00)
>>>>> Title : Re: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")
>>>>>
>>>>> On 12/15/2014 08:52 AM, Jongman Heo wrote:
>>>>>>> ------- Original Message -------
>>>>>>> Sender : Juergen Gross
>>>>>>> Date : 2014-12-15 14:04 (GMT+09:00)
>>>>>>> Title : Re: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")
>>>>>>>
>>>>>>> On 12/14/2014 06:07 AM, ?????? wrote:
>>>>>>>>
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> My Linux virtual machine on (Windows) VMWare workstation 10 can't boot with following commit.
>>>>>>>>
>>>>>>>> commit bd809af16e3ab1f8d55b3e2928c47c67e2a865d2
>>>>>>>> Author: Juergen Gross
>>>>>>>> Date: Mon Nov 3 14:02:03 2014 +0100
>>>>>>>>
>>>>>>>> x86: Enable PAT to use cache mode translation tables
>>>>>>>>
>>>>>>>> Unfortunately I can't see any console log.
>>>>>>>
>>>>>>> Hmm, weird. Could you provide some more information?
>>>>>>>
>>>>>>> Kernel config, hardware used, /proc/cpuinfo of working kernel?
>>>>>>> Anything you see with earlyprintk enabled?
>>>>>>>
>>>>>>>
>>>>>>> Juergen
>>>>>>
>>>>>> (Sorry for resending this email, previous one bounced from mailing list due to HTML format)
>>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> I'm using Fedora 21, with custom built kernel.
>>>>>> Host PC is windows 7 64-bit, and running VMWare workstation 10 for guest Fedora Linux.
>>>>>>
>>>>>> With earlyprintk, just following message is printed.
>>>>>>
>>>>>> early console in setup code
>>>>>>
>>>>>> and nothing more...
>>>>>
>>>>> Can you try attached diagnostic patch, please? I suspect a problem
>>>>> regarding VMWares PAT emulation...
>>>>>
>>>>>
>>>>> Juergen
>>>>
>>>> Hi,
>>>>
>>>> With the commit reverted, the patch doesn't apply.
>>>
>>> Sure.
>>>
>>>> Without revert, kernel (patch applied) doesn't boot and I can't see any message.
>>>
>>> What are your kernel parameters? There must be some message with the
>>> diagnostic patch, as the first pr_info() is called before any other
>>> part of the critical patch is becoming active. Could it be you have
>>> instructed the kernel to be "quiet"? I'd recommend:
>>>
>>> earlyprintk=vga ignore_loglevel
>>>
>>> and no quiet. I don't know VMWare settings, so may be you can use
>>> earlyprintk=ttyS0 instead of vga.
>>>
>>>>
>>>> Let me show you my PAT values (the commit reverted)
>>>>
>>>> # dmesg | grep PAT
>>>> [ 0.000000] x86 PAT enabled: cpu 0, old 0x0, new 0x7010600070106
>>>> [ 0.314631] x86 PAT enabled: cpu 3, old 0x0, new 0x7010600070106
>>>> [ 0.314703] x86 PAT enabled: cpu 1, old 0x0, new 0x7010600070106
>>>> [ 0.314780] x86 PAT enabled: cpu 2, old 0x0, new 0x7010600070106
>>>> [ 0.314852] x86 PAT enabled: cpu 4, old 0x0, new 0x7010600070106
>>>> [ 0.314923] x86 PAT enabled: cpu 0, old 0x0, new 0x7010600070106
>>>> [ 0.314997] x86 PAT enabled: cpu 6, old 0x0, new 0x7010600070106
>>>> [ 0.315069] x86 PAT enabled: cpu 7, old 0x0, new 0x7010600070106
>>>> [ 0.315142] x86 PAT enabled: cpu 5, old 0x0, new 0x7010600070106
>>>
>>> These are the expected values. But these values are the ones which are
>>> written, not the ones which have been read from the PAT MSR again.
>>>
>>> Without applying the critical patch you could add:
>>>
>>> rdmsrl(MSR_IA32_CR_PAT, pat);
>>> printk(KERN_INFO "PAT read: cpu %d, 0x%Lx\n", smp_processor_id(), pat);
>>>
>>> at the end of pat_init() to verify VMWare is handling reads of the PAT
>>> MSR properly.
>>>
>>> Juergen
>>>
>>
>> Hi,
>>
>> With earlyprintk=vga, I can see the log.
>> But due to call trace, I can't see what the pat value is.
>>
>> Call chain is as follows.
>>
>> i386_start_kernel -> start_kernel -> setup_arch ->
>> mtrr_bp_init -> get_mtrr_state -> pat_init ->
>> pat_init_cache_mode_entry -> update_cache_mode_entry ->
>> early_idt_handler -> dump_stack
>>
>> So, I blocked update_cache_mode_entry() call like below...
>>
>> --- a/arch/x86/mm/pat.c
>> +++ b/arch/x86/mm/pat.c
>> @@ -182,11 +182,12 @@ void pat_init_cache_modes(void)
>> u64 pat;
>>
>> rdmsrl(MSR_IA32_CR_PAT, pat);
>> + pr_info("read pat %0llx\n", pat);
>> pat_msg[32] = 0;
>> for (i = 7; i >= 0; i--) {
>> cache = pat_get_cache_mode((pat >> (i * 8)) & 7,
>> pat_msg + 4 * i);
>> - update_cache_mode_entry(i, cache);
>> + //update_cache_mode_entry(i, cache);
>> }
>> pr_info("PAT configuration [0-7]: %s\n", pat_msg);
>> }
>> @@ -238,9 +239,13 @@ void pat_init(void)
>> rdmsrl(MSR_IA32_CR_PAT, boot_pat_state);
>>
>> wrmsrl(MSR_IA32_CR_PAT, pat);
>> + pr_info("about to write pat %0llx\n", pat);
>>
>> if (boot_cpu)
>> pat_init_cache_modes();
>> +
>> + rdmsrl(MSR_IA32_CR_PAT, pat);
>> + printk(KERN_INFO "PAT read: cpu %d, 0x%Lx\n", smp_processor_id(), pat);
>> }
>>
>>
>> Then boot is fine, and PAT values are as follows.
>>
>>
>> # dmesg|grep -i "pat "
>> [ 0.000000] about to write pat 7010600070106
>> [ 0.000000] read pat 0
>> [ 0.000000] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>> [ 0.000000] PAT read: cpu 0, 0x0
>> [ 0.320559] about to write pat 7010600070106
>> [ 0.320876] read pat 0
>> [ 0.321090] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>> [ 0.321260] PAT read: cpu 5, 0x0
>> [ 0.321403] about to write pat 7010600070106
>> [ 0.321818] read pat 0
>> [ 0.322033] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>> [ 0.322205] PAT read: cpu 6, 0x0
>> [ 0.322334] about to write pat 7010600070106
>> [ 0.322417] read pat 0
>> [ 0.322479] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>> [ 0.322573] PAT read: cpu 0, 0x0
>> [ 0.322703] about to write pat 7010600070106
>> [ 0.323012] read pat 0
>> [ 0.323228] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>> [ 0.323400] PAT read: cpu 1, 0x0
>> [ 0.323537] about to write pat 7010600070106
>> [ 0.323833] read pat 0
>> [ 0.324055] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>> [ 0.324224] PAT read: cpu 7, 0x0
>> [ 0.324362] about to write pat 7010600070106
>> [ 0.324662] read pat 0
>> [ 0.324877] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>> [ 0.325048] PAT read: cpu 2, 0x0
>> [ 0.325185] about to write pat 7010600070106
>> [ 0.325483] read pat 0
>> [ 0.325695] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>> [ 0.325863] PAT read: cpu 4, 0x0
>> [ 0.325997] about to write pat 7010600070106
>> [ 0.326288] read pat 0
>> [ 0.326507] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>> [ 0.326677] PAT read: cpu 3, 0x0
>
>Okay, so VMWare doesn't seem to return the correct PAT MSR value.
>
>I suggest you try "nopat" as kernel option. This should disable all the
>PAT handling and VMWare can't wreck the kernel this way.
>
>I'll write a patch which detects this VMWare bug by checking the PAT
>value after writing it.
>
>Thanks for reporting that case,
>
>
>Juergen
>
>

OK, my VMWare works with "nopat" option.

Thanks~.????{.n?+???????+%?????ݶ??w??{.n?+????{??G?????{ay?ʇڙ?,j??f???h?????????z_??(?階?ݢj"???m??????G????????????&???~???iO???z??v?^?m???? ????????I?

2014-12-16 13:08:44

by Peter Hurley

[permalink] [raw]
Subject: Re: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")

VMware guys probably already know this but just in case

[ +cc Thomas Hellstrom ]

Jongman - you need to fix your mailer to use plaintext and not base64.

On 12/16/2014 01:46 AM, Jongman Heo wrote:
>> Sender : Juergen Gross<[email protected]>
>> On 12/16/2014 07:29 AM, Jongman Heo wrote:
>>>> Sender : Juergen Gross
>>>> On 12/16/2014 05:40 AM, Jongman Heo wrote:
>>>>>> Sender : Juergen Gross
>>>>>> On 12/15/2014 08:52 AM, Jongman Heo wrote:
>>>>>>>> Sender : Juergen Gross
>>>>>>>> On 12/14/2014 06:07 AM, 허종만 wrote:
>>>>>>>>>
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> My Linux virtual machine on (Windows) VMWare workstation 10 can't boot with following commit.
>>>>>>>>>
>>>>>>>>> commit bd809af16e3ab1f8d55b3e2928c47c67e2a865d2
>>>>>>>>> Author: Juergen Gross
>>>>>>>>> Date: Mon Nov 3 14:02:03 2014 +0100
>>>>>>>>>
>>>>>>>>> x86: Enable PAT to use cache mode translation tables
>>>>>>>>>
>>>>>>>>> Unfortunately I can't see any console log.
>>>>>>>>
>>>>>>>> Hmm, weird. Could you provide some more information?
>>>>>>>>
>>>>>>>> Kernel config, hardware used, /proc/cpuinfo of working kernel?
>>>>>>>> Anything you see with earlyprintk enabled?
>>>>>>>>
>>>>>>>>
>>>>>>>> Juergen
>>>>>>>
>>>>>>> (Sorry for resending this email, previous one bounced from mailing list due to HTML format)
>>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>> I'm using Fedora 21, with custom built kernel.
>>>>>>> Host PC is windows 7 64-bit, and running VMWare workstation 10 for guest Fedora Linux.
>>>>>>>
>>>>>>> With earlyprintk, just following message is printed.
>>>>>>>
>>>>>>> early console in setup code
>>>>>>>
>>>>>>> and nothing more...
>>>>>>
>>>>>> Can you try attached diagnostic patch, please? I suspect a problem
>>>>>> regarding VMWares PAT emulation...
>>>>>>
>>>>>>
>>>>>> Juergen
>>>>>
>>>>> Hi,
>>>>>
>>>>> With the commit reverted, the patch doesn't apply.
>>>>
>>>> Sure.
>>>>
>>>>> Without revert, kernel (patch applied) doesn't boot and I can't see any message.
>>>>
>>>> What are your kernel parameters? There must be some message with the
>>>> diagnostic patch, as the first pr_info() is called before any other
>>>> part of the critical patch is becoming active. Could it be you have
>>>> instructed the kernel to be "quiet"? I'd recommend:
>>>>
>>>> earlyprintk=vga ignore_loglevel
>>>>
>>>> and no quiet. I don't know VMWare settings, so may be you can use
>>>> earlyprintk=ttyS0 instead of vga.
>>>>
>>>>>
>>>>> Let me show you my PAT values (the commit reverted)
>>>>>
>>>>> # dmesg | grep PAT
>>>>> [ 0.000000] x86 PAT enabled: cpu 0, old 0x0, new 0x7010600070106
>>>>> [ 0.314631] x86 PAT enabled: cpu 3, old 0x0, new 0x7010600070106
>>>>> [ 0.314703] x86 PAT enabled: cpu 1, old 0x0, new 0x7010600070106
>>>>> [ 0.314780] x86 PAT enabled: cpu 2, old 0x0, new 0x7010600070106
>>>>> [ 0.314852] x86 PAT enabled: cpu 4, old 0x0, new 0x7010600070106
>>>>> [ 0.314923] x86 PAT enabled: cpu 0, old 0x0, new 0x7010600070106
>>>>> [ 0.314997] x86 PAT enabled: cpu 6, old 0x0, new 0x7010600070106
>>>>> [ 0.315069] x86 PAT enabled: cpu 7, old 0x0, new 0x7010600070106
>>>>> [ 0.315142] x86 PAT enabled: cpu 5, old 0x0, new 0x7010600070106
>>>>
>>>> These are the expected values. But these values are the ones which are
>>>> written, not the ones which have been read from the PAT MSR again.
>>>>
>>>> Without applying the critical patch you could add:
>>>>
>>>> rdmsrl(MSR_IA32_CR_PAT, pat);
>>>> printk(KERN_INFO "PAT read: cpu %d, 0x%Lx\n", smp_processor_id(), pat);
>>>>
>>>> at the end of pat_init() to verify VMWare is handling reads of the PAT
>>>> MSR properly.
>>>>
>>>> Juergen
>>>>
>>>
>>> Hi,
>>>
>>> With earlyprintk=vga, I can see the log.
>>> But due to call trace, I can't see what the pat value is.
>>>
>>> Call chain is as follows.
>>>
>>> i386_start_kernel -> start_kernel -> setup_arch ->
>>> mtrr_bp_init -> get_mtrr_state -> pat_init ->
>>> pat_init_cache_mode_entry -> update_cache_mode_entry ->
>>> early_idt_handler -> dump_stack
>>>
>>> So, I blocked update_cache_mode_entry() call like below...
>>>
>>> --- a/arch/x86/mm/pat.c
>>> +++ b/arch/x86/mm/pat.c
>>> @@ -182,11 +182,12 @@ void pat_init_cache_modes(void)
>>> u64 pat;
>>>
>>> rdmsrl(MSR_IA32_CR_PAT, pat);
>>> + pr_info("read pat %0llx\n", pat);
>>> pat_msg[32] = 0;
>>> for (i = 7; i >= 0; i--) {
>>> cache = pat_get_cache_mode((pat >> (i * 8)) & 7,
>>> pat_msg + 4 * i);
>>> - update_cache_mode_entry(i, cache);
>>> + //update_cache_mode_entry(i, cache);
>>> }
>>> pr_info("PAT configuration [0-7]: %s\n", pat_msg);
>>> }
>>> @@ -238,9 +239,13 @@ void pat_init(void)
>>> rdmsrl(MSR_IA32_CR_PAT, boot_pat_state);
>>>
>>> wrmsrl(MSR_IA32_CR_PAT, pat);
>>> + pr_info("about to write pat %0llx\n", pat);
>>>
>>> if (boot_cpu)
>>> pat_init_cache_modes();
>>> +
>>> + rdmsrl(MSR_IA32_CR_PAT, pat);
>>> + printk(KERN_INFO "PAT read: cpu %d, 0x%Lx\n", smp_processor_id(), pat);
>>> }
>>>
>>>
>>> Then boot is fine, and PAT values are as follows.
>>>
>>>
>>> # dmesg|grep -i "pat "
>>> [ 0.000000] about to write pat 7010600070106
>>> [ 0.000000] read pat 0
>>> [ 0.000000] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>> [ 0.000000] PAT read: cpu 0, 0x0
>>> [ 0.320559] about to write pat 7010600070106
>>> [ 0.320876] read pat 0
>>> [ 0.321090] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>> [ 0.321260] PAT read: cpu 5, 0x0
>>> [ 0.321403] about to write pat 7010600070106
>>> [ 0.321818] read pat 0
>>> [ 0.322033] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>> [ 0.322205] PAT read: cpu 6, 0x0
>>> [ 0.322334] about to write pat 7010600070106
>>> [ 0.322417] read pat 0
>>> [ 0.322479] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>> [ 0.322573] PAT read: cpu 0, 0x0
>>> [ 0.322703] about to write pat 7010600070106
>>> [ 0.323012] read pat 0
>>> [ 0.323228] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>> [ 0.323400] PAT read: cpu 1, 0x0
>>> [ 0.323537] about to write pat 7010600070106
>>> [ 0.323833] read pat 0
>>> [ 0.324055] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>> [ 0.324224] PAT read: cpu 7, 0x0
>>> [ 0.324362] about to write pat 7010600070106
>>> [ 0.324662] read pat 0
>>> [ 0.324877] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>> [ 0.325048] PAT read: cpu 2, 0x0
>>> [ 0.325185] about to write pat 7010600070106
>>> [ 0.325483] read pat 0
>>> [ 0.325695] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>> [ 0.325863] PAT read: cpu 4, 0x0
>>> [ 0.325997] about to write pat 7010600070106
>>> [ 0.326288] read pat 0
>>> [ 0.326507] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>> [ 0.326677] PAT read: cpu 3, 0x0
>>
>> Okay, so VMWare doesn't seem to return the correct PAT MSR value.
>>
>> I suggest you try "nopat" as kernel option. This should disable all the
>> PAT handling and VMWare can't wreck the kernel this way.
>>
>> I'll write a patch which detects this VMWare bug by checking the PAT
>> value after writing it.
>>
>> Thanks for reporting that case,
>>
>>
>> Juergen
>>
>>
>
> OK, my VMWare works with "nopat" option.
>
> Thanks~.N

2014-12-16 15:12:23

by Thomas Hellstrom

[permalink] [raw]
Subject: Re: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")

Jongman, what product (player, ws, esx) and version are you using?

Thanks,
Thomas


On 12/16/2014 02:08 PM, Peter Hurley wrote:
> VMware guys probably already know this but just in case
>
> [ +cc Thomas Hellstrom ]
>
> Jongman - you need to fix your mailer to use plaintext and not base64.
>
> On 12/16/2014 01:46 AM, Jongman Heo wrote:
>>> Sender : Juergen Gross<[email protected]>
>>> On 12/16/2014 07:29 AM, Jongman Heo wrote:
>>>>> Sender : Juergen Gross
>>>>> On 12/16/2014 05:40 AM, Jongman Heo wrote:
>>>>>>> Sender : Juergen Gross
>>>>>>> On 12/15/2014 08:52 AM, Jongman Heo wrote:
>>>>>>>>> Sender : Juergen Gross
>>>>>>>>> On 12/14/2014 06:07 AM, 허종만 wrote:
>>>>>>>>>> Hi,
>>>>>>>>>>
>>>>>>>>>> My Linux virtual machine on (Windows) VMWare workstation 10 can't boot with following commit.
>>>>>>>>>>
>>>>>>>>>> commit bd809af16e3ab1f8d55b3e2928c47c67e2a865d2
>>>>>>>>>> Author: Juergen Gross
>>>>>>>>>> Date: Mon Nov 3 14:02:03 2014 +0100
>>>>>>>>>>
>>>>>>>>>> x86: Enable PAT to use cache mode translation tables
>>>>>>>>>>
>>>>>>>>>> Unfortunately I can't see any console log.
>>>>>>>>> Hmm, weird. Could you provide some more information?
>>>>>>>>>
>>>>>>>>> Kernel config, hardware used, /proc/cpuinfo of working kernel?
>>>>>>>>> Anything you see with earlyprintk enabled?
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Juergen
>>>>>>>> (Sorry for resending this email, previous one bounced from mailing list due to HTML format)
>>>>>>>>
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> I'm using Fedora 21, with custom built kernel.
>>>>>>>> Host PC is windows 7 64-bit, and running VMWare workstation 10 for guest Fedora Linux.
>>>>>>>>
>>>>>>>> With earlyprintk, just following message is printed.
>>>>>>>>
>>>>>>>> early console in setup code
>>>>>>>>
>>>>>>>> and nothing more...
>>>>>>> Can you try attached diagnostic patch, please? I suspect a problem
>>>>>>> regarding VMWares PAT emulation...
>>>>>>>
>>>>>>>
>>>>>>> Juergen
>>>>>> Hi,
>>>>>>
>>>>>> With the commit reverted, the patch doesn't apply.
>>>>> Sure.
>>>>>
>>>>>> Without revert, kernel (patch applied) doesn't boot and I can't see any message.
>>>>> What are your kernel parameters? There must be some message with the
>>>>> diagnostic patch, as the first pr_info() is called before any other
>>>>> part of the critical patch is becoming active. Could it be you have
>>>>> instructed the kernel to be "quiet"? I'd recommend:
>>>>>
>>>>> earlyprintk=vga ignore_loglevel
>>>>>
>>>>> and no quiet. I don't know VMWare settings, so may be you can use
>>>>> earlyprintk=ttyS0 instead of vga.
>>>>>
>>>>>> Let me show you my PAT values (the commit reverted)
>>>>>>
>>>>>> # dmesg | grep PAT
>>>>>> [ 0.000000] x86 PAT enabled: cpu 0, old 0x0, new 0x7010600070106
>>>>>> [ 0.314631] x86 PAT enabled: cpu 3, old 0x0, new 0x7010600070106
>>>>>> [ 0.314703] x86 PAT enabled: cpu 1, old 0x0, new 0x7010600070106
>>>>>> [ 0.314780] x86 PAT enabled: cpu 2, old 0x0, new 0x7010600070106
>>>>>> [ 0.314852] x86 PAT enabled: cpu 4, old 0x0, new 0x7010600070106
>>>>>> [ 0.314923] x86 PAT enabled: cpu 0, old 0x0, new 0x7010600070106
>>>>>> [ 0.314997] x86 PAT enabled: cpu 6, old 0x0, new 0x7010600070106
>>>>>> [ 0.315069] x86 PAT enabled: cpu 7, old 0x0, new 0x7010600070106
>>>>>> [ 0.315142] x86 PAT enabled: cpu 5, old 0x0, new 0x7010600070106
>>>>> These are the expected values. But these values are the ones which are
>>>>> written, not the ones which have been read from the PAT MSR again.
>>>>>
>>>>> Without applying the critical patch you could add:
>>>>>
>>>>> rdmsrl(MSR_IA32_CR_PAT, pat);
>>>>> printk(KERN_INFO "PAT read: cpu %d, 0x%Lx\n", smp_processor_id(), pat);
>>>>>
>>>>> at the end of pat_init() to verify VMWare is handling reads of the PAT
>>>>> MSR properly.
>>>>>
>>>>> Juergen
>>>>>
>>>> Hi,
>>>>
>>>> With earlyprintk=vga, I can see the log.
>>>> But due to call trace, I can't see what the pat value is.
>>>>
>>>> Call chain is as follows.
>>>>
>>>> i386_start_kernel -> start_kernel -> setup_arch ->
>>>> mtrr_bp_init -> get_mtrr_state -> pat_init ->
>>>> pat_init_cache_mode_entry -> update_cache_mode_entry ->
>>>> early_idt_handler -> dump_stack
>>>>
>>>> So, I blocked update_cache_mode_entry() call like below...
>>>>
>>>> --- a/arch/x86/mm/pat.c
>>>> +++ b/arch/x86/mm/pat.c
>>>> @@ -182,11 +182,12 @@ void pat_init_cache_modes(void)
>>>> u64 pat;
>>>>
>>>> rdmsrl(MSR_IA32_CR_PAT, pat);
>>>> + pr_info("read pat %0llx\n", pat);
>>>> pat_msg[32] = 0;
>>>> for (i = 7; i >= 0; i--) {
>>>> cache = pat_get_cache_mode((pat >> (i * 8)) & 7,
>>>> pat_msg + 4 * i);
>>>> - update_cache_mode_entry(i, cache);
>>>> + //update_cache_mode_entry(i, cache);
>>>> }
>>>> pr_info("PAT configuration [0-7]: %s\n", pat_msg);
>>>> }
>>>> @@ -238,9 +239,13 @@ void pat_init(void)
>>>> rdmsrl(MSR_IA32_CR_PAT, boot_pat_state);
>>>>
>>>> wrmsrl(MSR_IA32_CR_PAT, pat);
>>>> + pr_info("about to write pat %0llx\n", pat);
>>>>
>>>> if (boot_cpu)
>>>> pat_init_cache_modes();
>>>> +
>>>> + rdmsrl(MSR_IA32_CR_PAT, pat);
>>>> + printk(KERN_INFO "PAT read: cpu %d, 0x%Lx\n", smp_processor_id(), pat);
>>>> }
>>>>
>>>>
>>>> Then boot is fine, and PAT values are as follows.
>>>>
>>>>
>>>> # dmesg|grep -i "pat "
>>>> [ 0.000000] about to write pat 7010600070106
>>>> [ 0.000000] read pat 0
>>>> [ 0.000000] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>>> [ 0.000000] PAT read: cpu 0, 0x0
>>>> [ 0.320559] about to write pat 7010600070106
>>>> [ 0.320876] read pat 0
>>>> [ 0.321090] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>>> [ 0.321260] PAT read: cpu 5, 0x0
>>>> [ 0.321403] about to write pat 7010600070106
>>>> [ 0.321818] read pat 0
>>>> [ 0.322033] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>>> [ 0.322205] PAT read: cpu 6, 0x0
>>>> [ 0.322334] about to write pat 7010600070106
>>>> [ 0.322417] read pat 0
>>>> [ 0.322479] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>>> [ 0.322573] PAT read: cpu 0, 0x0
>>>> [ 0.322703] about to write pat 7010600070106
>>>> [ 0.323012] read pat 0
>>>> [ 0.323228] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>>> [ 0.323400] PAT read: cpu 1, 0x0
>>>> [ 0.323537] about to write pat 7010600070106
>>>> [ 0.323833] read pat 0
>>>> [ 0.324055] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>>> [ 0.324224] PAT read: cpu 7, 0x0
>>>> [ 0.324362] about to write pat 7010600070106
>>>> [ 0.324662] read pat 0
>>>> [ 0.324877] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>>> [ 0.325048] PAT read: cpu 2, 0x0
>>>> [ 0.325185] about to write pat 7010600070106
>>>> [ 0.325483] read pat 0
>>>> [ 0.325695] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>>> [ 0.325863] PAT read: cpu 4, 0x0
>>>> [ 0.325997] about to write pat 7010600070106
>>>> [ 0.326288] read pat 0
>>>> [ 0.326507] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>>> [ 0.326677] PAT read: cpu 3, 0x0
>>> Okay, so VMWare doesn't seem to return the correct PAT MSR value.
>>>
>>> I suggest you try "nopat" as kernel option. This should disable all the
>>> PAT handling and VMWare can't wreck the kernel this way.
>>>
>>> I'll write a patch which detects this VMWare bug by checking the PAT
>>> value after writing it.
>>>
>>> Thanks for reporting that case,
>>>
>>>
>>> Juergen
>>>
>>>
>> OK, my VMWare works with "nopat" option.
>>
>> Thanks~.N

2014-12-17 02:46:18

by Jongman Heo

[permalink] [raw]
Subject: Re: Re: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")


Hi,

I'm using VMWare workstation, version 10.0.3 build-1895310, on Windows 7 64-bit.
Guest is Fedora 21.

------- Original Message -------
Sender : Thomas Hellstrom<[email protected]>
Date : 2014-12-17 00:12 (GMT+09:00)
Title : Re: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")

Jongman, what product (player, ws, esx) and version are you using?

Thanks,
Thomas


On 12/16/2014 02:08 PM, Peter Hurley wrote:
> VMware guys probably already know this but just in case
>
> [ +cc Thomas Hellstrom ]
>
> Jongman - you need to fix your mailer to use plaintext and not base64.
>
> On 12/16/2014 01:46 AM, Jongman Heo wrote:
>>> Sender : Juergen Gross
>>> On 12/16/2014 07:29 AM, Jongman Heo wrote:
>>>>> Sender : Juergen Gross
>>>>> On 12/16/2014 05:40 AM, Jongman Heo wrote:
>>>>>>> Sender : Juergen Gross
>>>>>>> On 12/15/2014 08:52 AM, Jongman Heo wrote:
>>>>>>>>> Sender : Juergen Gross
>>>>>>>>> On 12/14/2014 06:07 AM, ?????? wrote:
>>>>>>>>>> Hi,
>>>>>>>>>>
>>>>>>>>>> My Linux virtual machine on (Windows) VMWare workstation 10 can't boot with following commit.
>>>>>>>>>>
>>>>>>>>>> commit bd809af16e3ab1f8d55b3e2928c47c67e2a865d2
>>>>>>>>>> Author: Juergen Gross
>>>>>>>>>> Date: Mon Nov 3 14:02:03 2014 +0100
>>>>>>>>>>
>>>>>>>>>> x86: Enable PAT to use cache mode translation tables
>>>>>>>>>>
>>>>>>>>>> Unfortunately I can't see any console log.
>>>>>>>>> Hmm, weird. Could you provide some more information?
>>>>>>>>>
>>>>>>>>> Kernel config, hardware used, /proc/cpuinfo of working kernel?
>>>>>>>>> Anything you see with earlyprintk enabled?
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Juergen
>>>>>>>> (Sorry for resending this email, previous one bounced from mailing list due to HTML format)
>>>>>>>>
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> I'm using Fedora 21, with custom built kernel.
>>>>>>>> Host PC is windows 7 64-bit, and running VMWare workstation 10 for guest Fedora Linux.
>>>>>>>>
>>>>>>>> With earlyprintk, just following message is printed.
>>>>>>>>
>>>>>>>> early console in setup code
>>>>>>>>
>>>>>>>> and nothing more...
>>>>>>> Can you try attached diagnostic patch, please? I suspect a problem
>>>>>>> regarding VMWares PAT emulation...
>>>>>>>
>>>>>>>
>>>>>>> Juergen
>>>>>> Hi,
>>>>>>
>>>>>> With the commit reverted, the patch doesn't apply.
>>>>> Sure.
>>>>>
>>>>>> Without revert, kernel (patch applied) doesn't boot and I can't see any message.
>>>>> What are your kernel parameters? There must be some message with the
>>>>> diagnostic patch, as the first pr_info() is called before any other
>>>>> part of the critical patch is becoming active. Could it be you have
>>>>> instructed the kernel to be "quiet"? I'd recommend:
>>>>>
>>>>> earlyprintk=vga ignore_loglevel
>>>>>
>>>>> and no quiet. I don't know VMWare settings, so may be you can use
>>>>> earlyprintk=ttyS0 instead of vga.
>>>>>
>>>>>> Let me show you my PAT values (the commit reverted)
>>>>>>
>>>>>> # dmesg | grep PAT
>>>>>> [ 0.000000] x86 PAT enabled: cpu 0, old 0x0, new 0x7010600070106
>>>>>> [ 0.314631] x86 PAT enabled: cpu 3, old 0x0, new 0x7010600070106
>>>>>> [ 0.314703] x86 PAT enabled: cpu 1, old 0x0, new 0x7010600070106
>>>>>> [ 0.314780] x86 PAT enabled: cpu 2, old 0x0, new 0x7010600070106
>>>>>> [ 0.314852] x86 PAT enabled: cpu 4, old 0x0, new 0x7010600070106
>>>>>> [ 0.314923] x86 PAT enabled: cpu 0, old 0x0, new 0x7010600070106
>>>>>> [ 0.314997] x86 PAT enabled: cpu 6, old 0x0, new 0x7010600070106
>>>>>> [ 0.315069] x86 PAT enabled: cpu 7, old 0x0, new 0x7010600070106
>>>>>> [ 0.315142] x86 PAT enabled: cpu 5, old 0x0, new 0x7010600070106
>>>>> These are the expected values. But these values are the ones which are
>>>>> written, not the ones which have been read from the PAT MSR again.
>>>>>
>>>>> Without applying the critical patch you could add:
>>>>>
>>>>> rdmsrl(MSR_IA32_CR_PAT, pat);
>>>>> printk(KERN_INFO "PAT read: cpu %d, 0x%Lx\n", smp_processor_id(), pat);
>>>>>
>>>>> at the end of pat_init() to verify VMWare is handling reads of the PAT
>>>>> MSR properly.
>>>>>
>>>>> Juergen
>>>>>
>>>> Hi,
>>>>
>>>> With earlyprintk=vga, I can see the log.
>>>> But due to call trace, I can't see what the pat value is.
>>>>
>>>> Call chain is as follows.
>>>>
>>>> i386_start_kernel -> start_kernel -> setup_arch ->
>>>> mtrr_bp_init -> get_mtrr_state -> pat_init ->
>>>> pat_init_cache_mode_entry -> update_cache_mode_entry ->
>>>> early_idt_handler -> dump_stack
>>>>
>>>> So, I blocked update_cache_mode_entry() call like below...
>>>>
>>>> --- a/arch/x86/mm/pat.c
>>>> +++ b/arch/x86/mm/pat.c
>>>> @@ -182,11 +182,12 @@ void pat_init_cache_modes(void)
>>>> u64 pat;
>>>>
>>>> rdmsrl(MSR_IA32_CR_PAT, pat);
>>>> + pr_info("read pat %0llx\n", pat);
>>>> pat_msg[32] = 0;
>>>> for (i = 7; i >= 0; i--) {
>>>> cache = pat_get_cache_mode((pat >> (i * 8)) & 7,
>>>> pat_msg + 4 * i);
>>>> - update_cache_mode_entry(i, cache);
>>>> + //update_cache_mode_entry(i, cache);
>>>> }
>>>> pr_info("PAT configuration [0-7]: %s\n", pat_msg);
>>>> }
>>>> @@ -238,9 +239,13 @@ void pat_init(void)
>>>> rdmsrl(MSR_IA32_CR_PAT, boot_pat_state);
>>>>
>>>> wrmsrl(MSR_IA32_CR_PAT, pat);
>>>> + pr_info("about to write pat %0llx\n", pat);
>>>>
>>>> if (boot_cpu)
>>>> pat_init_cache_modes();
>>>> +
>>>> + rdmsrl(MSR_IA32_CR_PAT, pat);
>>>> + printk(KERN_INFO "PAT read: cpu %d, 0x%Lx\n", smp_processor_id(), pat);
>>>> }
>>>>
>>>>
>>>> Then boot is fine, and PAT values are as follows.
>>>>
>>>>
>>>> # dmesg|grep -i "pat "
>>>> [ 0.000000] about to write pat 7010600070106
>>>> [ 0.000000] read pat 0
>>>> [ 0.000000] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>>> [ 0.000000] PAT read: cpu 0, 0x0
>>>> [ 0.320559] about to write pat 7010600070106
>>>> [ 0.320876] read pat 0
>>>> [ 0.321090] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>>> [ 0.321260] PAT read: cpu 5, 0x0
>>>> [ 0.321403] about to write pat 7010600070106
>>>> [ 0.321818] read pat 0
>>>> [ 0.322033] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>>> [ 0.322205] PAT read: cpu 6, 0x0
>>>> [ 0.322334] about to write pat 7010600070106
>>>> [ 0.322417] read pat 0
>>>> [ 0.322479] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>>> [ 0.322573] PAT read: cpu 0, 0x0
>>>> [ 0.322703] about to write pat 7010600070106
>>>> [ 0.323012] read pat 0
>>>> [ 0.323228] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>>> [ 0.323400] PAT read: cpu 1, 0x0
>>>> [ 0.323537] about to write pat 7010600070106
>>>> [ 0.323833] read pat 0
>>>> [ 0.324055] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>>> [ 0.324224] PAT read: cpu 7, 0x0
>>>> [ 0.324362] about to write pat 7010600070106
>>>> [ 0.324662] read pat 0
>>>> [ 0.324877] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>>> [ 0.325048] PAT read: cpu 2, 0x0
>>>> [ 0.325185] about to write pat 7010600070106
>>>> [ 0.325483] read pat 0
>>>> [ 0.325695] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>>> [ 0.325863] PAT read: cpu 4, 0x0
>>>> [ 0.325997] about to write pat 7010600070106
>>>> [ 0.326288] read pat 0
>>>> [ 0.326507] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>>> [ 0.326677] PAT read: cpu 3, 0x0
>>> Okay, so VMWare doesn't seem to return the correct PAT MSR value.
>>>
>>> I suggest you try "nopat" as kernel option. This should disable all the
>>> PAT handling and VMWare can't wreck the kernel this way.
>>>
>>> I'll write a patch which detects this VMWare bug by checking the PAT
>>> value after writing it.
>>>
>>> Thanks for reporting that case,
>>>
>>>
>>> Juergen
>>>
>>>
>> OK, my VMWare works with "nopat" option.
>>
>> Thanks~.N
????{.n?+???????+%?????ݶ??w??{.n?+????{??G?????{ay?ʇڙ?,j??f???h?????????z_??(?階?ݢj"???m??????G????????????&???~???iO???z??v?^?m???? ????????I?

2014-12-17 05:39:39

by Thomas Hellstrom

[permalink] [raw]
Subject: Re: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")

Thanks,

>From what I understand, there is indeed a virtual processor bug. It's
fixed in HardWare Version 11, so that the PAT registers return the
correct value.

Thanks,
Thomas


On 12/17/2014 03:46 AM, Jongman Heo wrote:
> Hi,
>
> I'm using VMWare workstation, version 10.0.3 build-1895310, on Windows 7 64-bit.
> Guest is Fedora 21.
>
> ------- Original Message -------
> Sender : Thomas Hellstrom<[email protected]>
> Date : 2014-12-17 00:12 (GMT+09:00)
> Title : Re: [3.18+] Can't boot with commit bd809af1 ("x86: Enable PAT to use cache mode translation tables")
>
> Jongman, what product (player, ws, esx) and version are you using?
>
> Thanks,
> Thomas
>
>
> On 12/16/2014 02:08 PM, Peter Hurley wrote:
>> VMware guys probably already know this but just in case
>>
>> [ +cc Thomas Hellstrom ]
>>
>> Jongman - you need to fix your mailer to use plaintext and not base64.
>>
>> On 12/16/2014 01:46 AM, Jongman Heo wrote:
>>>> Sender : Juergen Gross
>>>> On 12/16/2014 07:29 AM, Jongman Heo wrote:
>>>>>> Sender : Juergen Gross
>>>>>> On 12/16/2014 05:40 AM, Jongman Heo wrote:
>>>>>>>> Sender : Juergen Gross
>>>>>>>> On 12/15/2014 08:52 AM, Jongman Heo wrote:
>>>>>>>>>> Sender : Juergen Gross
>>>>>>>>>> On 12/14/2014 06:07 AM, ?????? wrote:
>>>>>>>>>>> Hi,
>>>>>>>>>>>
>>>>>>>>>>> My Linux virtual machine on (Windows) VMWare workstation 10 can't boot with following commit.
>>>>>>>>>>>
>>>>>>>>>>> commit bd809af16e3ab1f8d55b3e2928c47c67e2a865d2
>>>>>>>>>>> Author: Juergen Gross
>>>>>>>>>>> Date: Mon Nov 3 14:02:03 2014 +0100
>>>>>>>>>>>
>>>>>>>>>>> x86: Enable PAT to use cache mode translation tables
>>>>>>>>>>>
>>>>>>>>>>> Unfortunately I can't see any console log.
>>>>>>>>>> Hmm, weird. Could you provide some more information?
>>>>>>>>>>
>>>>>>>>>> Kernel config, hardware used, /proc/cpuinfo of working kernel?
>>>>>>>>>> Anything you see with earlyprintk enabled?
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Juergen
>>>>>>>>> (Sorry for resending this email, previous one bounced from mailing list due to HTML format)
>>>>>>>>>
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> I'm using Fedora 21, with custom built kernel.
>>>>>>>>> Host PC is windows 7 64-bit, and running VMWare workstation 10 for guest Fedora Linux.
>>>>>>>>>
>>>>>>>>> With earlyprintk, just following message is printed.
>>>>>>>>>
>>>>>>>>> early console in setup code
>>>>>>>>>
>>>>>>>>> and nothing more...
>>>>>>>> Can you try attached diagnostic patch, please? I suspect a problem
>>>>>>>> regarding VMWares PAT emulation...
>>>>>>>>
>>>>>>>>
>>>>>>>> Juergen
>>>>>>> Hi,
>>>>>>>
>>>>>>> With the commit reverted, the patch doesn't apply.
>>>>>> Sure.
>>>>>>
>>>>>>> Without revert, kernel (patch applied) doesn't boot and I can't see any message.
>>>>>> What are your kernel parameters? There must be some message with the
>>>>>> diagnostic patch, as the first pr_info() is called before any other
>>>>>> part of the critical patch is becoming active. Could it be you have
>>>>>> instructed the kernel to be "quiet"? I'd recommend:
>>>>>>
>>>>>> earlyprintk=vga ignore_loglevel
>>>>>>
>>>>>> and no quiet. I don't know VMWare settings, so may be you can use
>>>>>> earlyprintk=ttyS0 instead of vga.
>>>>>>
>>>>>>> Let me show you my PAT values (the commit reverted)
>>>>>>>
>>>>>>> # dmesg | grep PAT
>>>>>>> [ 0.000000] x86 PAT enabled: cpu 0, old 0x0, new 0x7010600070106
>>>>>>> [ 0.314631] x86 PAT enabled: cpu 3, old 0x0, new 0x7010600070106
>>>>>>> [ 0.314703] x86 PAT enabled: cpu 1, old 0x0, new 0x7010600070106
>>>>>>> [ 0.314780] x86 PAT enabled: cpu 2, old 0x0, new 0x7010600070106
>>>>>>> [ 0.314852] x86 PAT enabled: cpu 4, old 0x0, new 0x7010600070106
>>>>>>> [ 0.314923] x86 PAT enabled: cpu 0, old 0x0, new 0x7010600070106
>>>>>>> [ 0.314997] x86 PAT enabled: cpu 6, old 0x0, new 0x7010600070106
>>>>>>> [ 0.315069] x86 PAT enabled: cpu 7, old 0x0, new 0x7010600070106
>>>>>>> [ 0.315142] x86 PAT enabled: cpu 5, old 0x0, new 0x7010600070106
>>>>>> These are the expected values. But these values are the ones which are
>>>>>> written, not the ones which have been read from the PAT MSR again.
>>>>>>
>>>>>> Without applying the critical patch you could add:
>>>>>>
>>>>>> rdmsrl(MSR_IA32_CR_PAT, pat);
>>>>>> printk(KERN_INFO "PAT read: cpu %d, 0x%Lx\n", smp_processor_id(), pat);
>>>>>>
>>>>>> at the end of pat_init() to verify VMWare is handling reads of the PAT
>>>>>> MSR properly.
>>>>>>
>>>>>> Juergen
>>>>>>
>>>>> Hi,
>>>>>
>>>>> With earlyprintk=vga, I can see the log.
>>>>> But due to call trace, I can't see what the pat value is.
>>>>>
>>>>> Call chain is as follows.
>>>>>
>>>>> i386_start_kernel -> start_kernel -> setup_arch ->
>>>>> mtrr_bp_init -> get_mtrr_state -> pat_init ->
>>>>> pat_init_cache_mode_entry -> update_cache_mode_entry ->
>>>>> early_idt_handler -> dump_stack
>>>>>
>>>>> So, I blocked update_cache_mode_entry() call like below...
>>>>>
>>>>> --- a/arch/x86/mm/pat.c
>>>>> +++ b/arch/x86/mm/pat.c
>>>>> @@ -182,11 +182,12 @@ void pat_init_cache_modes(void)
>>>>> u64 pat;
>>>>>
>>>>> rdmsrl(MSR_IA32_CR_PAT, pat);
>>>>> + pr_info("read pat %0llx\n", pat);
>>>>> pat_msg[32] = 0;
>>>>> for (i = 7; i >= 0; i--) {
>>>>> cache = pat_get_cache_mode((pat >> (i * 8)) & 7,
>>>>> pat_msg + 4 * i);
>>>>> - update_cache_mode_entry(i, cache);
>>>>> + //update_cache_mode_entry(i, cache);
>>>>> }
>>>>> pr_info("PAT configuration [0-7]: %s\n", pat_msg);
>>>>> }
>>>>> @@ -238,9 +239,13 @@ void pat_init(void)
>>>>> rdmsrl(MSR_IA32_CR_PAT, boot_pat_state);
>>>>>
>>>>> wrmsrl(MSR_IA32_CR_PAT, pat);
>>>>> + pr_info("about to write pat %0llx\n", pat);
>>>>>
>>>>> if (boot_cpu)
>>>>> pat_init_cache_modes();
>>>>> +
>>>>> + rdmsrl(MSR_IA32_CR_PAT, pat);
>>>>> + printk(KERN_INFO "PAT read: cpu %d, 0x%Lx\n", smp_processor_id(), pat);
>>>>> }
>>>>>
>>>>>
>>>>> Then boot is fine, and PAT values are as follows.
>>>>>
>>>>>
>>>>> # dmesg|grep -i "pat "
>>>>> [ 0.000000] about to write pat 7010600070106
>>>>> [ 0.000000] read pat 0
>>>>> [ 0.000000] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>>>> [ 0.000000] PAT read: cpu 0, 0x0
>>>>> [ 0.320559] about to write pat 7010600070106
>>>>> [ 0.320876] read pat 0
>>>>> [ 0.321090] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>>>> [ 0.321260] PAT read: cpu 5, 0x0
>>>>> [ 0.321403] about to write pat 7010600070106
>>>>> [ 0.321818] read pat 0
>>>>> [ 0.322033] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>>>> [ 0.322205] PAT read: cpu 6, 0x0
>>>>> [ 0.322334] about to write pat 7010600070106
>>>>> [ 0.322417] read pat 0
>>>>> [ 0.322479] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>>>> [ 0.322573] PAT read: cpu 0, 0x0
>>>>> [ 0.322703] about to write pat 7010600070106
>>>>> [ 0.323012] read pat 0
>>>>> [ 0.323228] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>>>> [ 0.323400] PAT read: cpu 1, 0x0
>>>>> [ 0.323537] about to write pat 7010600070106
>>>>> [ 0.323833] read pat 0
>>>>> [ 0.324055] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>>>> [ 0.324224] PAT read: cpu 7, 0x0
>>>>> [ 0.324362] about to write pat 7010600070106
>>>>> [ 0.324662] read pat 0
>>>>> [ 0.324877] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>>>> [ 0.325048] PAT read: cpu 2, 0x0
>>>>> [ 0.325185] about to write pat 7010600070106
>>>>> [ 0.325483] read pat 0
>>>>> [ 0.325695] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>>>> [ 0.325863] PAT read: cpu 4, 0x0
>>>>> [ 0.325997] about to write pat 7010600070106
>>>>> [ 0.326288] read pat 0
>>>>> [ 0.326507] PAT configuration [0-7]: UC UC UC UC UC UC UC UC
>>>>> [ 0.326677] PAT read: cpu 3, 0x0
>>>> Okay, so VMWare doesn't seem to return the correct PAT MSR value.
>>>>
>>>> I suggest you try "nopat" as kernel option. This should disable all the
>>>> PAT handling and VMWare can't wreck the kernel this way.
>>>>
>>>> I'll write a patch which detects this VMWare bug by checking the PAT
>>>> value after writing it.
>>>>
>>>> Thanks for reporting that case,
>>>>
>>>>
>>>> Juergen
>>>>
>>>>
>>> OK, my VMWare works with "nopat" option.
>>>
>>> Thanks~.N