Purpose of this patch is add support for S6E3HA2 AMOLED panel on
the TM2 board. The first patch adds support for S6E3HA2 panel
device tree document and driver, the second patch add support for
S6E3HA2 panel device tree.
Hoegeun Kwon (1):
drm/panel: Add support for S6E3HA2 panel driver on TM2 board
Hyungwon Hwang (1):
arm64: dts: exynos: Add support for S6E3HA2 panel device on TM2 board
.../bindings/display/panel/samsung,s6e3ha2.txt | 52 ++
arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 33 +
drivers/gpu/drm/panel/Kconfig | 6 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c | 756 +++++++++++++++++++++
5 files changed, 848 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c
--
1.9.1
This patch add support for MIPI-DSI based S6E3HA2 AMOLED panel
driver. This panel has 1440x2560 resolution in 5.7-inch physical
panel in the TM2 device.
Signed-off-by: Donghwa Lee <[email protected]>
Signed-off-by: Hyungwon Hwang <[email protected]>
Signed-off-by: Hoegeun Kwon <[email protected]>
---
.../bindings/display/panel/samsung,s6e3ha2.txt | 52 ++
drivers/gpu/drm/panel/Kconfig | 6 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c | 756 +++++++++++++++++++++
4 files changed, 815 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
new file mode 100644
index 0000000..1f41f24
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
@@ -0,0 +1,52 @@
+Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel
+
+Required properties:
+ - compatible: "samsung,s6e3ha2"
+ - reg: the virtual channel number of a DSI peripheral
+ - vdd3-supply: core voltage supply
+ - vci-supply: voltage supply for analog circuits
+ - reset-gpios: a GPIO spec for the reset pin
+ - enable-gpios: a GPIO spec for the panel enable pin
+ - te-gpios: a GPIO spec for the tearing effect synchronization signal gpio pin
+
+Optional properties:
+ - display-timings: timings for the connected panel as described by [1]
+
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in [2]. This
+node should describe panel's video bus.
+
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
+[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+ panel@0 {
+ compatible = "samsung,s6e3ha2";
+ reg = <0>;
+ vdd3-supply = <&ldo27_reg>;
+ vci-supply = <&ldo28_reg>;
+ reset-gpios = <&gpg0 0 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+ te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
+
+ display-timings {
+ timing-0 {
+ clock-frequency = <0>;
+ hactive = <1440>;
+ vactive = <2560>;
+ hfront-porch = <1>;
+ hback-porch = <1>;
+ hsync-len = <1>;
+ vfront-porch = <1>;
+ vback-porch = <15>;
+ vsync-len = <1>;
+ };
+ };
+
+ port {
+ dsi_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 62aba97..e1a2fcd 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -58,6 +58,12 @@ config DRM_PANEL_SAMSUNG_S6E8AA0
select DRM_MIPI_DSI
select VIDEOMODE_HELPERS
+config DRM_PANEL_SAMSUNG_S6E3HA2
+ tristate "Samsung S6E3HA2 DSI video mode panel"
+ depends on OF
+ select DRM_MIPI_DSI
+ select VIDEOMODE_HELPERS
+
config DRM_PANEL_SHARP_LQ101R1SX01
tristate "Sharp LQ101R1SX01 panel"
depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index a5c7ec0..993699b 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -4,5 +4,6 @@ obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o
obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o
obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o
+obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2) += panel-samsung-s6e3ha2.o
obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c b/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c
new file mode 100644
index 0000000..a6ad63b
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c
@@ -0,0 +1,756 @@
+/*
+ * MIPI-DSI based s6e3ha2 AMOLED 5.7 inch panel driver.
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ * Donghwa Lee <[email protected]>
+ * Hyungwon Hwang <[email protected]>
+ * Hoegeun Kwon <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <drm/drmP.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+#include <video/mipi_display.h>
+#include <video/of_videomode.h>
+#include <video/videomode.h>
+#include <linux/backlight.h>
+
+#define S6E3HA2_MIN_BRIGHTNESS 0
+#define S6E3HA2_MAX_BRIGHTNESS 100
+#define S6E3HA2_DEFAULT_BRIGHTNESS 80
+
+#define S6E3HA2_NUM_GAMMA_STEPS 46
+#define S6E3HA2_GAMMA_CMD_CNT 35
+#define S6E3HA2_VINT_STATUS_MAX 10
+
+static const u8 gamma_tbl[S6E3HA2_NUM_GAMMA_STEPS][S6E3HA2_GAMMA_CMD_CNT] = {
+ { 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x89, 0x87, 0x87, 0x82, 0x83,
+ 0x85, 0x88, 0x8b, 0x8b, 0x84, 0x88, 0x82, 0x82, 0x89, 0x86, 0x8c,
+ 0x94, 0x84, 0xb1, 0xaf, 0x8e, 0xcf, 0xad, 0xc9, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x89, 0x87, 0x87, 0x84, 0x84,
+ 0x85, 0x87, 0x8b, 0x8a, 0x84, 0x88, 0x82, 0x82, 0x89, 0x86, 0x8a,
+ 0x93, 0x84, 0xb0, 0xae, 0x8e, 0xc9, 0xa8, 0xc5, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x89, 0x87, 0x87, 0x83, 0x83,
+ 0x85, 0x86, 0x8a, 0x8a, 0x84, 0x88, 0x81, 0x84, 0x8a, 0x88, 0x8a,
+ 0x91, 0x84, 0xb1, 0xae, 0x8b, 0xd5, 0xb2, 0xcc, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x89, 0x87, 0x87, 0x83, 0x83,
+ 0x85, 0x86, 0x8a, 0x8a, 0x84, 0x87, 0x81, 0x84, 0x8a, 0x87, 0x8a,
+ 0x91, 0x85, 0xae, 0xac, 0x8a, 0xc3, 0xa3, 0xc0, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x85, 0x85,
+ 0x86, 0x85, 0x88, 0x89, 0x84, 0x89, 0x82, 0x84, 0x87, 0x85, 0x8b,
+ 0x91, 0x88, 0xad, 0xab, 0x8a, 0xb7, 0x9b, 0xb6, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x89, 0x87, 0x87, 0x83, 0x83,
+ 0x85, 0x86, 0x89, 0x8a, 0x84, 0x89, 0x83, 0x83, 0x86, 0x84, 0x8b,
+ 0x90, 0x84, 0xb0, 0xae, 0x8b, 0xce, 0xad, 0xc8, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x89, 0x87, 0x87, 0x83, 0x83,
+ 0x85, 0x87, 0x89, 0x8a, 0x83, 0x87, 0x82, 0x85, 0x88, 0x87, 0x89,
+ 0x8f, 0x84, 0xac, 0xaa, 0x89, 0xb1, 0x98, 0xaf, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x89, 0x87, 0x87, 0x83, 0x83,
+ 0x85, 0x86, 0x88, 0x89, 0x84, 0x88, 0x83, 0x82, 0x85, 0x84, 0x8c,
+ 0x91, 0x86, 0xac, 0xaa, 0x89, 0xc2, 0xa5, 0xbd, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x84, 0x84,
+ 0x85, 0x87, 0x89, 0x8a, 0x83, 0x87, 0x82, 0x85, 0x88, 0x87, 0x88,
+ 0x8b, 0x82, 0xad, 0xaa, 0x8a, 0xc2, 0xa5, 0xbd, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x89, 0x87, 0x87, 0x83, 0x83,
+ 0x85, 0x86, 0x87, 0x89, 0x84, 0x88, 0x83, 0x82, 0x85, 0x84, 0x8a,
+ 0x8e, 0x84, 0xae, 0xac, 0x89, 0xda, 0xb7, 0xd0, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x84, 0x84,
+ 0x85, 0x86, 0x87, 0x89, 0x84, 0x88, 0x83, 0x80, 0x83, 0x82, 0x8b,
+ 0x8e, 0x85, 0xac, 0xaa, 0x89, 0xc8, 0xaa, 0xc1, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x84, 0x84,
+ 0x85, 0x86, 0x87, 0x89, 0x81, 0x85, 0x81, 0x84, 0x86, 0x84, 0x8c,
+ 0x8c, 0x84, 0xa9, 0xa8, 0x87, 0xa3, 0x92, 0xa1, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x84, 0x84,
+ 0x85, 0x86, 0x87, 0x89, 0x84, 0x86, 0x83, 0x80, 0x83, 0x81, 0x8c,
+ 0x8d, 0x84, 0xaa, 0xaa, 0x89, 0xce, 0xaf, 0xc5, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x84, 0x84,
+ 0x85, 0x86, 0x87, 0x89, 0x81, 0x83, 0x80, 0x83, 0x85, 0x85, 0x8c,
+ 0x8c, 0x84, 0xa8, 0xa8, 0x88, 0xb5, 0x9f, 0xb0, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x84, 0x84,
+ 0x86, 0x86, 0x87, 0x88, 0x81, 0x83, 0x80, 0x83, 0x85, 0x85, 0x8c,
+ 0x8b, 0x84, 0xab, 0xa8, 0x86, 0xd4, 0xb4, 0xc9, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x84, 0x84,
+ 0x86, 0x86, 0x87, 0x88, 0x81, 0x83, 0x80, 0x84, 0x84, 0x85, 0x8b,
+ 0x8a, 0x83, 0xa6, 0xa5, 0x84, 0xbb, 0xa4, 0xb3, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x84, 0x84,
+ 0x86, 0x85, 0x86, 0x86, 0x82, 0x85, 0x81, 0x82, 0x83, 0x84, 0x8e,
+ 0x8b, 0x83, 0xa4, 0xa3, 0x8a, 0xa1, 0x93, 0x9d, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x83, 0x83,
+ 0x85, 0x86, 0x87, 0x87, 0x82, 0x85, 0x81, 0x82, 0x82, 0x84, 0x8e,
+ 0x8b, 0x83, 0xa4, 0xa2, 0x86, 0xc1, 0xa9, 0xb7, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x83, 0x83,
+ 0x85, 0x86, 0x87, 0x87, 0x82, 0x85, 0x81, 0x82, 0x82, 0x84, 0x8d,
+ 0x89, 0x82, 0xa2, 0xa1, 0x84, 0xa7, 0x98, 0xa1, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x83, 0x83,
+ 0x85, 0x86, 0x87, 0x87, 0x82, 0x85, 0x81, 0x83, 0x83, 0x85, 0x8c,
+ 0x87, 0x7f, 0xa2, 0x9d, 0x88, 0x8d, 0x88, 0x8b, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xbb, 0x00, 0xc5, 0x00, 0xb4, 0x87, 0x86, 0x86, 0x84, 0x83,
+ 0x86, 0x87, 0x87, 0x87, 0x80, 0x82, 0x7f, 0x86, 0x86, 0x88, 0x8a,
+ 0x84, 0x7e, 0x9d, 0x9c, 0x82, 0x8d, 0x88, 0x8b, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xbd, 0x00, 0xc7, 0x00, 0xb7, 0x87, 0x85, 0x85, 0x84, 0x83,
+ 0x86, 0x86, 0x86, 0x88, 0x81, 0x83, 0x80, 0x83, 0x84, 0x85, 0x8a,
+ 0x85, 0x7e, 0x9c, 0x9b, 0x85, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xc0, 0x00, 0xca, 0x00, 0xbb, 0x87, 0x86, 0x85, 0x83, 0x83,
+ 0x85, 0x86, 0x86, 0x88, 0x81, 0x83, 0x80, 0x84, 0x85, 0x86, 0x89,
+ 0x83, 0x7d, 0x9c, 0x99, 0x87, 0x7b, 0x7b, 0x7c, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xc4, 0x00, 0xcd, 0x00, 0xbe, 0x87, 0x86, 0x85, 0x83, 0x83,
+ 0x86, 0x85, 0x85, 0x87, 0x81, 0x82, 0x80, 0x82, 0x82, 0x83, 0x8a,
+ 0x85, 0x7f, 0x9f, 0x9b, 0x86, 0xb4, 0xa1, 0xac, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xc7, 0x00, 0xd0, 0x00, 0xc2, 0x87, 0x85, 0x85, 0x83, 0x82,
+ 0x85, 0x85, 0x85, 0x86, 0x82, 0x83, 0x80, 0x82, 0x82, 0x84, 0x87,
+ 0x86, 0x80, 0x9e, 0x9a, 0x87, 0xa7, 0x98, 0xa1, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xca, 0x00, 0xd2, 0x00, 0xc5, 0x87, 0x85, 0x84, 0x82, 0x82,
+ 0x84, 0x85, 0x85, 0x86, 0x81, 0x82, 0x7f, 0x82, 0x82, 0x84, 0x88,
+ 0x86, 0x81, 0x9d, 0x98, 0x86, 0x8d, 0x88, 0x8b, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xce, 0x00, 0xd6, 0x00, 0xca, 0x86, 0x85, 0x84, 0x83, 0x83,
+ 0x85, 0x84, 0x84, 0x85, 0x81, 0x82, 0x80, 0x81, 0x81, 0x82, 0x89,
+ 0x86, 0x81, 0x9c, 0x97, 0x86, 0xa7, 0x98, 0xa1, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xd1, 0x00, 0xd9, 0x00, 0xce, 0x86, 0x84, 0x83, 0x83, 0x82,
+ 0x85, 0x85, 0x85, 0x86, 0x81, 0x83, 0x81, 0x82, 0x82, 0x83, 0x86,
+ 0x83, 0x7f, 0x99, 0x95, 0x86, 0xbb, 0xa4, 0xb3, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xd4, 0x00, 0xdb, 0x00, 0xd1, 0x86, 0x85, 0x83, 0x83, 0x82,
+ 0x85, 0x84, 0x84, 0x85, 0x80, 0x83, 0x82, 0x80, 0x80, 0x81, 0x87,
+ 0x84, 0x81, 0x98, 0x93, 0x85, 0xae, 0x9c, 0xa8, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xd8, 0x00, 0xde, 0x00, 0xd6, 0x86, 0x84, 0x83, 0x81, 0x81,
+ 0x83, 0x85, 0x85, 0x85, 0x82, 0x83, 0x81, 0x81, 0x81, 0x83, 0x86,
+ 0x84, 0x80, 0x98, 0x91, 0x85, 0x7b, 0x7b, 0x7c, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xdc, 0x00, 0xe2, 0x00, 0xda, 0x85, 0x84, 0x83, 0x82, 0x82,
+ 0x84, 0x84, 0x84, 0x85, 0x81, 0x82, 0x82, 0x80, 0x80, 0x81, 0x83,
+ 0x82, 0x7f, 0x99, 0x93, 0x86, 0x94, 0x8b, 0x92, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xdf, 0x00, 0xe5, 0x00, 0xde, 0x85, 0x84, 0x82, 0x82, 0x82,
+ 0x84, 0x83, 0x83, 0x84, 0x81, 0x81, 0x80, 0x83, 0x82, 0x84, 0x82,
+ 0x81, 0x7f, 0x99, 0x92, 0x86, 0x7b, 0x7b, 0x7c, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xe4, 0x00, 0xe9, 0x00, 0xe3, 0x84, 0x83, 0x82, 0x81, 0x81,
+ 0x82, 0x83, 0x83, 0x84, 0x80, 0x81, 0x80, 0x83, 0x83, 0x84, 0x80,
+ 0x81, 0x7c, 0x99, 0x92, 0x87, 0xa1, 0x93, 0x9d, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xe4, 0x00, 0xe9, 0x00, 0xe3, 0x85, 0x84, 0x83, 0x81, 0x81,
+ 0x82, 0x82, 0x82, 0x83, 0x80, 0x81, 0x80, 0x81, 0x80, 0x82, 0x83,
+ 0x82, 0x80, 0x91, 0x8d, 0x83, 0x9a, 0x90, 0x96, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xe4, 0x00, 0xe9, 0x00, 0xe3, 0x84, 0x83, 0x82, 0x81, 0x81,
+ 0x82, 0x83, 0x83, 0x84, 0x80, 0x81, 0x80, 0x81, 0x80, 0x82, 0x83,
+ 0x81, 0x7f, 0x91, 0x8c, 0x82, 0x8d, 0x88, 0x8b, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xe4, 0x00, 0xe9, 0x00, 0xe3, 0x84, 0x83, 0x82, 0x81, 0x81,
+ 0x82, 0x83, 0x83, 0x83, 0x82, 0x82, 0x81, 0x81, 0x80, 0x82, 0x82,
+ 0x82, 0x7f, 0x94, 0x89, 0x84, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xe4, 0x00, 0xe9, 0x00, 0xe3, 0x84, 0x83, 0x82, 0x81, 0x81,
+ 0x82, 0x83, 0x83, 0x83, 0x82, 0x82, 0x81, 0x81, 0x80, 0x82, 0x83,
+ 0x82, 0x7f, 0x91, 0x85, 0x81, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xe4, 0x00, 0xe9, 0x00, 0xe3, 0x84, 0x83, 0x82, 0x81, 0x81,
+ 0x82, 0x83, 0x83, 0x83, 0x80, 0x80, 0x7f, 0x83, 0x82, 0x84, 0x83,
+ 0x82, 0x7f, 0x90, 0x84, 0x81, 0x9a, 0x90, 0x96, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xe4, 0x00, 0xe9, 0x00, 0xe3, 0x84, 0x83, 0x82, 0x80, 0x80,
+ 0x82, 0x83, 0x83, 0x83, 0x80, 0x80, 0x7f, 0x80, 0x80, 0x81, 0x81,
+ 0x82, 0x83, 0x7e, 0x80, 0x7c, 0xa4, 0x97, 0x9f, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xe9, 0x00, 0xec, 0x00, 0xe8, 0x84, 0x83, 0x82, 0x81, 0x81,
+ 0x82, 0x82, 0x82, 0x83, 0x7f, 0x7f, 0x7f, 0x81, 0x80, 0x82, 0x83,
+ 0x83, 0x84, 0x79, 0x7c, 0x79, 0xb1, 0xa0, 0xaa, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xed, 0x00, 0xf0, 0x00, 0xec, 0x83, 0x83, 0x82, 0x80, 0x80,
+ 0x81, 0x82, 0x82, 0x82, 0x7f, 0x7f, 0x7e, 0x81, 0x81, 0x82, 0x80,
+ 0x81, 0x81, 0x84, 0x84, 0x83, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xf1, 0x00, 0xf4, 0x00, 0xf1, 0x83, 0x82, 0x82, 0x80, 0x80,
+ 0x81, 0x82, 0x82, 0x82, 0x80, 0x80, 0x80, 0x80, 0x80, 0x81, 0x7d,
+ 0x7e, 0x7f, 0x84, 0x84, 0x83, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xf6, 0x00, 0xf7, 0x00, 0xf5, 0x82, 0x82, 0x81, 0x80, 0x80,
+ 0x80, 0x82, 0x82, 0x82, 0x80, 0x80, 0x80, 0x7f, 0x7f, 0x7f, 0x82,
+ 0x82, 0x82, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xfa, 0x00, 0xfb, 0x00, 0xfa, 0x81, 0x81, 0x81, 0x80, 0x80,
+ 0x80, 0x82, 0x82, 0x82, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80,
+ 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x80, 0x80, 0x80, 0x80, 0x80,
+ 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80,
+ 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x80, 0x80, 0x80, 0x80, 0x80,
+ 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80,
+ 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
+ 0x00, 0x00 }
+};
+
+unsigned char VINT_TABLE[S6E3HA2_VINT_STATUS_MAX] = {
+ 0x18, 0x19, 0x1a, 0x1b, 0x1c,
+ 0x1d, 0x1e, 0x1f, 0x20, 0x21
+};
+
+struct s6e3ha2 {
+ struct device *dev;
+ struct drm_panel panel;
+ struct backlight_device *bl_dev;
+
+ struct regulator_bulk_data supplies[2];
+ struct gpio_desc *reset_gpio;
+ struct gpio_desc *enable_gpio;
+ u32 power_on_delay;
+ u32 reset_delay;
+ struct videomode vm;
+
+ /* This field is tested by functions directly accessing DSI bus before
+ * transfer, transfer is skipped if it is set. In case of transfer
+ * failure or unexpected response the field is set to error value.
+ * Such construct allows to eliminate many checks in higher level
+ * functions.
+ */
+ int error;
+};
+
+static int s6e3ha2_clear_error(struct s6e3ha2 *ctx)
+{
+ int ret = ctx->error;
+
+ ctx->error = 0;
+ return ret;
+}
+
+static void s6e3ha2_dcs_write(struct s6e3ha2 *ctx, const void *data, size_t len)
+{
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+ ssize_t ret;
+
+ if (ctx->error < 0)
+ return;
+
+ ret = mipi_dsi_dcs_write_buffer(dsi, data, len);
+ if (ret < 0) {
+ dev_err(ctx->dev, "error %zd writing dcs seq: %*ph\n",
+ ret, (int)len, data);
+ ctx->error = ret;
+ }
+}
+
+#define s6e3ha2_dcs_write_seq_static(ctx, seq...) do { \
+ static const u8 d[] = { seq }; \
+ s6e3ha2_dcs_write(ctx, d, ARRAY_SIZE(d)); \
+} while (0)
+
+static void s6e3ha2_test_key_on_f0(struct s6e3ha2 *ctx)
+{
+ s6e3ha2_dcs_write_seq_static(ctx, 0xf0, 0x5a, 0x5a);
+}
+
+static void s6e3ha2_test_key_off_f0(struct s6e3ha2 *ctx)
+{
+ s6e3ha2_dcs_write_seq_static(ctx, 0xf0, 0xa5, 0xa5);
+}
+
+static void s6e3ha2_test_key_on_fc(struct s6e3ha2 *ctx)
+{
+ s6e3ha2_dcs_write_seq_static(ctx, 0xfc, 0x5a, 0x5a);
+}
+
+static void s6e3ha2_test_key_off_fc(struct s6e3ha2 *ctx)
+{
+ s6e3ha2_dcs_write_seq_static(ctx, 0xfc, 0xa5, 0xa5);
+}
+
+static void s6e3ha2_single_dsi_set(struct s6e3ha2 *ctx)
+{
+ s6e3ha2_dcs_write_seq_static(ctx, 0xf2, 0x67);
+ s6e3ha2_dcs_write_seq_static(ctx, 0xf9, 0x09);
+}
+
+static void s6e3ha2_freq_calibration(struct s6e3ha2 *ctx)
+{
+ s6e3ha2_dcs_write_seq_static(ctx, 0xfd, 0x1c);
+ s6e3ha2_dcs_write_seq_static(ctx, 0xfe, 0x20, 0x39);
+ s6e3ha2_dcs_write_seq_static(ctx, 0xfe, 0xa0);
+ s6e3ha2_dcs_write_seq_static(ctx, 0xfe, 0x20);
+ s6e3ha2_dcs_write_seq_static(ctx, 0xce, 0x03, 0x3b, 0x12, 0x62,
+ 0x40, 0x80, 0xc0, 0x28, 0x28, 0x28, 0x28, 0x39, 0xc5);
+}
+
+static void s6e3ha2_aor_control(struct s6e3ha2 *ctx)
+{
+ s6e3ha2_dcs_write_seq_static(ctx, 0xb2, 0x03, 0x10);
+}
+
+static void s6e3ha2_caps_elvss_set(struct s6e3ha2 *ctx)
+{
+ s6e3ha2_dcs_write_seq_static(ctx, 0xb6, 0x9c, 0x0a);
+}
+
+static void s6e3ha2_acl_off(struct s6e3ha2 *ctx)
+{
+ s6e3ha2_dcs_write_seq_static(ctx, 0x55, 0x00);
+}
+
+static void s6e3ha2_acl_off_opr(struct s6e3ha2 *ctx)
+{
+ s6e3ha2_dcs_write_seq_static(ctx, 0xb5, 0x40);
+}
+
+static void s6e3ha2_test_global(struct s6e3ha2 *ctx)
+{
+ s6e3ha2_dcs_write_seq_static(ctx, 0xb0, 0x07);
+}
+
+static void s6e3ha2_test(struct s6e3ha2 *ctx)
+{
+ s6e3ha2_dcs_write_seq_static(ctx, 0xb8, 0x19);
+}
+
+static void s6e3ha2_touch_hsync_on1(struct s6e3ha2 *ctx) {
+ s6e3ha2_dcs_write_seq_static(ctx,
+ 0xbd, 0x33, 0x11, 0x02, 0x16, 0x02, 0x16);
+}
+
+static void s6e3ha2_pentile_control(struct s6e3ha2 *ctx)
+{
+ s6e3ha2_dcs_write_seq_static(ctx, 0xc0, 0x00, 0x00, 0xd8, 0xd8);
+}
+
+static void s6e3ha2_poc_global(struct s6e3ha2 *ctx)
+{
+ s6e3ha2_dcs_write_seq_static(ctx, 0xb0, 0x20);
+}
+
+static void s6e3ha2_poc_setting(struct s6e3ha2 *ctx)
+{
+ s6e3ha2_dcs_write_seq_static(ctx, 0xfe, 0x08);
+}
+
+static void s6e3ha2_pcd_set_off(struct s6e3ha2 *ctx)
+{
+ s6e3ha2_dcs_write_seq_static(ctx, 0xcc, 0x40, 0x51);
+}
+
+static void s6e3ha2_err_fg_set(struct s6e3ha2 *ctx)
+{
+ s6e3ha2_dcs_write_seq_static(ctx, 0xed, 0x44);
+}
+
+static void s6e3ha2_hbm_off(struct s6e3ha2 *ctx)
+{
+ s6e3ha2_dcs_write_seq_static(ctx, 0x53, 0x00);
+}
+
+static void s6e3ha2_te_start_setting(struct s6e3ha2 *ctx)
+{
+ s6e3ha2_dcs_write_seq_static(ctx, 0xb9, 0x10, 0x09, 0xff, 0x00, 0x09);
+}
+
+static void s6e3ha2_gamma_update(struct s6e3ha2 *ctx)
+{
+ s6e3ha2_dcs_write_seq_static(ctx, 0xf7, 0x03);
+ ndelay(100); /* need for 100ns delay */
+ s6e3ha2_dcs_write_seq_static(ctx, 0xf7, 0x00);
+}
+
+static int s6e3ha2_get_brightness(struct backlight_device *bl_dev)
+{
+ return bl_dev->props.brightness;
+}
+
+static void s6e3ha2_set_vint(struct s6e3ha2 *ctx) {
+ struct backlight_device *bl_dev = ctx->bl_dev;
+ unsigned int brightness = bl_dev->props.brightness;
+ unsigned char data[] = { 0xf4, 0x8b,
+ VINT_TABLE[brightness * (S6E3HA2_VINT_STATUS_MAX - 1) /
+ S6E3HA2_MAX_BRIGHTNESS] };
+
+ s6e3ha2_dcs_write(ctx, data, 3);
+}
+
+static unsigned int s6e3ha2_get_brightness_index(unsigned int brightness)
+{
+ return (brightness * (S6E3HA2_NUM_GAMMA_STEPS - 1)) /
+ S6E3HA2_MAX_BRIGHTNESS;
+}
+
+static int s6e3ha2_update_gamma(struct s6e3ha2 *ctx, unsigned int brightness)
+{
+ struct backlight_device *bl_dev = ctx->bl_dev;
+ unsigned int index = s6e3ha2_get_brightness_index(brightness);
+ u8 data[S6E3HA2_GAMMA_CMD_CNT + 1] = { 0xca, };
+
+ memcpy(data + 1, gamma_tbl + index, S6E3HA2_GAMMA_CMD_CNT);
+ s6e3ha2_dcs_write(ctx, data, ARRAY_SIZE(data));
+
+ s6e3ha2_gamma_update(ctx);
+ bl_dev->props.brightness = brightness;
+
+ return 0;
+}
+
+static int s6e3ha2_set_brightness(struct backlight_device *bl_dev)
+{
+ struct s6e3ha2 *ctx = (struct s6e3ha2 *)bl_get_data(bl_dev);
+ unsigned int brightness = bl_dev->props.brightness;
+
+ if (brightness < S6E3HA2_MIN_BRIGHTNESS ||
+ brightness > bl_dev->props.max_brightness) {
+ dev_err(ctx->dev, "Invalid brightness: %u\n", brightness);
+ return -EINVAL;
+ }
+
+ if (bl_dev->props.power > FB_BLANK_NORMAL) {
+ dev_err(ctx->dev,
+ "panel must be at least in fb blank normal state\n");
+ return -EPERM;
+ }
+
+ s6e3ha2_test_key_on_f0(ctx);
+ s6e3ha2_update_gamma(ctx, brightness);
+ s6e3ha2_aor_control(ctx);
+ s6e3ha2_set_vint(ctx);
+ s6e3ha2_test_key_off_f0(ctx);
+
+ return ctx->error;
+}
+
+static const struct backlight_ops s6e3ha2_bl_ops = {
+ .get_brightness = s6e3ha2_get_brightness,
+ .update_status = s6e3ha2_set_brightness,
+};
+
+static void s6e3ha2_panel_init(struct s6e3ha2 *ctx)
+{
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+ u32 reset_delay = ctx->reset_delay * 1000;
+
+ mipi_dsi_dcs_exit_sleep_mode(dsi);
+ usleep_range(reset_delay, reset_delay + 1000);
+
+ s6e3ha2_test_key_on_f0(ctx);
+ s6e3ha2_single_dsi_set(ctx);
+ s6e3ha2_test_key_on_fc(ctx);
+ s6e3ha2_freq_calibration(ctx);
+ s6e3ha2_test_key_off_fc(ctx);
+ s6e3ha2_test_key_off_f0(ctx);
+}
+
+static int s6e3ha2_power_off(struct s6e3ha2 *ctx)
+{
+ return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+}
+
+static int s6e3ha2_disable(struct drm_panel *panel)
+{
+ struct s6e3ha2 *ctx = container_of(panel, struct s6e3ha2, panel);
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+ mipi_dsi_dcs_enter_sleep_mode(dsi);
+ if (ctx->error != 0)
+ goto err;
+
+ mipi_dsi_dcs_set_display_off(dsi);
+ if (ctx->error != 0)
+ goto err;
+
+ msleep(40);
+ ctx->bl_dev->props.power = FB_BLANK_NORMAL;
+
+ return 0;
+err:
+ return ctx->error;
+}
+
+static int s6e3ha2_unprepare(struct drm_panel *panel)
+{
+ struct s6e3ha2 *ctx = container_of(panel, struct s6e3ha2, panel);
+ int ret;
+
+ ret = s6e3ha2_clear_error(ctx);
+ if (!ret)
+ ctx->bl_dev->props.power = FB_BLANK_POWERDOWN;
+
+ return s6e3ha2_power_off(ctx);
+}
+
+static int s6e3ha2_power_on(struct s6e3ha2 *ctx)
+{
+ u32 reset_delay = ctx->reset_delay * 1000;
+ int ret;
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+ if (ret < 0)
+ return ret;
+
+ msleep(ctx->power_on_delay);
+
+ gpiod_set_value(ctx->enable_gpio, 0);
+ usleep_range(reset_delay, reset_delay + 1000);
+ gpiod_set_value(ctx->enable_gpio, 1);
+
+ gpiod_set_value(ctx->reset_gpio, 0);
+ usleep_range(reset_delay, reset_delay + 1000);
+ gpiod_set_value(ctx->reset_gpio, 1);
+ usleep_range(reset_delay, reset_delay + 1000);
+
+ return 0;
+}
+static int s6e3ha2_prepare(struct drm_panel *panel)
+{
+ struct s6e3ha2 *ctx = container_of(panel, struct s6e3ha2, panel);
+ int ret;
+
+ ret = s6e3ha2_power_on(ctx);
+ if (ret < 0)
+ return ret;
+
+ s6e3ha2_panel_init(ctx);
+
+ ret = s6e3ha2_clear_error(ctx);
+ if (ret < 0) {
+ s6e3ha2_power_off(ctx);
+ return ret;
+ }
+
+ ctx->bl_dev->props.power = FB_BLANK_NORMAL;
+
+ return 0;
+}
+
+static int s6e3ha2_enable(struct drm_panel *panel)
+{
+ struct s6e3ha2 *ctx = container_of(panel, struct s6e3ha2, panel);
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+ /* common setting */
+ mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+
+ s6e3ha2_test_key_on_f0(ctx);
+ s6e3ha2_test_key_on_fc(ctx);
+ s6e3ha2_touch_hsync_on1(ctx);
+ s6e3ha2_pentile_control(ctx);
+ s6e3ha2_poc_global(ctx);
+ s6e3ha2_poc_setting(ctx);
+ s6e3ha2_test_key_off_fc(ctx);
+
+ /* pcd setting off for TB */
+ s6e3ha2_pcd_set_off(ctx);
+ s6e3ha2_err_fg_set(ctx);
+ s6e3ha2_te_start_setting(ctx);
+
+ /* brightness setting */
+ s6e3ha2_set_brightness(ctx->bl_dev);
+ s6e3ha2_aor_control(ctx);
+ s6e3ha2_caps_elvss_set(ctx);
+ s6e3ha2_gamma_update(ctx);
+ s6e3ha2_acl_off(ctx);
+ s6e3ha2_acl_off_opr(ctx);
+ s6e3ha2_hbm_off(ctx);
+
+ /* elvss temp compensation */
+ s6e3ha2_test_global(ctx);
+ s6e3ha2_test(ctx);
+ s6e3ha2_test_key_off_f0(ctx);
+
+ mipi_dsi_dcs_set_display_on(dsi);
+ if (ctx->error != 0)
+ return ctx->error;
+
+ ctx->bl_dev->props.power = FB_BLANK_UNBLANK;
+
+ return 0;
+}
+
+static int s6e3ha2_get_modes(struct drm_panel *panel)
+{
+ struct drm_connector *connector = panel->connector;
+ struct s6e3ha2 *ctx = container_of(panel, struct s6e3ha2, panel);
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_create(connector->dev);
+ if (!mode) {
+ DRM_ERROR("failed to create a new display mode\n");
+ return 0;
+ }
+
+ drm_display_mode_from_videomode(&ctx->vm, mode);
+ mode->vrefresh = 60;
+ mode->width_mm = 71;
+ mode->height_mm = 125;
+ connector->display_info.width_mm = mode->width_mm;
+ connector->display_info.height_mm = mode->height_mm;
+
+ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+ drm_mode_probed_add(connector, mode);
+
+ return 1;
+}
+
+static const struct drm_panel_funcs s6e3ha2_drm_funcs = {
+ .disable = s6e3ha2_disable,
+ .unprepare = s6e3ha2_unprepare,
+ .prepare = s6e3ha2_prepare,
+ .enable = s6e3ha2_enable,
+ .get_modes = s6e3ha2_get_modes,
+};
+
+static int s6e3ha2_parse_dt(struct s6e3ha2 *ctx)
+{
+ struct device *dev = ctx->dev;
+ struct device_node *np = dev->of_node;
+ int ret;
+
+ ret = of_get_videomode(dev->of_node, &ctx->vm, 0);
+ if (ret < 0)
+ return ret;
+
+ of_property_read_u32(np, "power-on-delay", &ctx->power_on_delay);
+ of_property_read_u32(np, "reset-delay", &ctx->reset_delay);
+
+ return 0;
+}
+
+static int s6e3ha2_probe(struct mipi_dsi_device *dsi)
+{
+ struct device *dev = &dsi->dev;
+ struct s6e3ha2 *ctx;
+ int ret;
+
+ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ mipi_dsi_set_drvdata(dsi, ctx);
+
+ ctx->dev = dev;
+
+ dsi->lanes = 4;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS;
+
+ ret = s6e3ha2_parse_dt(ctx);
+ if (ret < 0)
+ return ret;
+
+ ctx->supplies[0].supply = "vdd3";
+ ctx->supplies[1].supply = "vci";
+
+ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
+ ctx->supplies);
+ if (ret < 0) {
+ dev_err(dev, "failed to get regulators: %d\n", ret);
+ return ret;
+ }
+
+ ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(ctx->reset_gpio)) {
+ dev_err(dev, "cannot get reset-gpios %ld\n",
+ PTR_ERR(ctx->reset_gpio));
+ return PTR_ERR(ctx->reset_gpio);
+ }
+
+ ctx->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_HIGH);
+ if (IS_ERR(ctx->enable_gpio)) {
+ dev_err(dev, "cannot get enable-gpios %ld\n",
+ PTR_ERR(ctx->enable_gpio));
+ return PTR_ERR(ctx->enable_gpio);
+ }
+
+ ctx->bl_dev = backlight_device_register("s6e3ha2", dev, ctx,
+ &s6e3ha2_bl_ops, NULL);
+ if (IS_ERR(ctx->bl_dev)) {
+ dev_err(dev, "failed to register backlight device\n");
+ return PTR_ERR(ctx->bl_dev);
+ }
+
+ ctx->bl_dev->props.max_brightness = S6E3HA2_MAX_BRIGHTNESS;
+ ctx->bl_dev->props.brightness = S6E3HA2_DEFAULT_BRIGHTNESS;
+ ctx->bl_dev->props.power = FB_BLANK_POWERDOWN;
+
+ drm_panel_init(&ctx->panel);
+ ctx->panel.dev = dev;
+ ctx->panel.funcs = &s6e3ha2_drm_funcs;
+
+ ret = drm_panel_add(&ctx->panel);
+ if (ret < 0)
+ goto unregister_backlight;
+
+ ret = mipi_dsi_attach(dsi);
+ if (ret < 0)
+ goto remove_panel;
+
+ return ret;
+
+remove_panel:
+ drm_panel_remove(&ctx->panel);
+
+unregister_backlight:
+ backlight_device_unregister(ctx->bl_dev);
+
+ return ret;
+}
+
+static int s6e3ha2_remove(struct mipi_dsi_device *dsi)
+{
+ struct s6e3ha2 *ctx = mipi_dsi_get_drvdata(dsi);
+
+ mipi_dsi_detach(dsi);
+ drm_panel_remove(&ctx->panel);
+ backlight_device_unregister(ctx->bl_dev);
+
+ return 0;
+}
+
+static const struct of_device_id s6e3ha2_of_match[] = {
+ { .compatible = "samsung,s6e3ha2" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, s6e3ha2_of_match);
+
+static struct mipi_dsi_driver s6e3ha2_driver = {
+ .probe = s6e3ha2_probe,
+ .remove = s6e3ha2_remove,
+ .driver = {
+ .name = "panel-samsung-s6e3ha2",
+ .of_match_table = s6e3ha2_of_match,
+ },
+};
+module_mipi_dsi_driver(s6e3ha2_driver);
+
+MODULE_AUTHOR("Donghwa Lee <[email protected]>");
+MODULE_AUTHOR("Hyungwon Hwang <[email protected]>");
+MODULE_AUTHOR("Hoegeun Kwon <[email protected]>");
+MODULE_DESCRIPTION("MIPI-DSI based s6e3ha2 AMOLED Panel Driver");
+MODULE_LICENSE("GPL v2");
--
1.9.1
From: Hyungwon Hwang <[email protected]>
This patch add the panel device tree node for S6E3HA2 display
controller to TM2 dts.
Signed-off-by: Hyungwon Hwang <[email protected]>
Signed-off-by: Andrzej Hajda <[email protected]>
Signed-off-by: Chanwoo Choi <[email protected]>
Signed-off-by: Hoegeun Kwon <[email protected]>
---
arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 33 +++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
index db879f4..4ad2332 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -252,11 +252,44 @@
reg = <1>;
dsi_out: endpoint {
+ remote-endpoint = <&dsi_in>;
samsung,burst-clock-frequency = <512000000>;
samsung,esc-clock-frequency = <16000000>;
};
};
};
+
+ panel@0 {
+ compatible = "samsung,s6e3ha2";
+ reg = <0>;
+ vdd3-supply = <&ldo27_reg>;
+ vci-supply = <&ldo28_reg>;
+ reset-gpios = <&gpg0 0 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+ te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
+ power-on-delay = <120>;
+ reset-delay = <5>;
+
+ display-timings {
+ timing-0 {
+ clock-frequency = <14874444>;
+ hactive = <1440>;
+ vactive = <2560>;
+ hfront-porch = <1>;
+ hback-porch = <1>;
+ hsync-len = <1>;
+ vfront-porch = <1>;
+ vback-porch = <15>;
+ vsync-len = <1>;
+ };
+ };
+
+ port {
+ dsi_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
};
&hsi2c_0 {
--
1.9.1
On 14.12.2016 07:04, Hoegeun Kwon wrote:
> This patch add support for MIPI-DSI based S6E3HA2 AMOLED panel
> driver. This panel has 1440x2560 resolution in 5.7-inch physical
> panel in the TM2 device.
>
> Signed-off-by: Donghwa Lee <[email protected]>
> Signed-off-by: Hyungwon Hwang <[email protected]>
> Signed-off-by: Hoegeun Kwon <[email protected]>
Hi Hoegeun Kwon,
Is there a reason to upstream obsolete driver? Current version of the
driver is available at [1]. It differs significantly and contains
multiple fixes and improvements. I guess it still requires some
polishing but it is better base for start.
[1]:
https://review.tizen.org/git/?p=platform/kernel/linux-exynos.git;a=blob;f=drivers/gpu/drm/panel/panel-s6e3ha2.c;hb=refs/heads/tizen
Regards
Andrzej
On 12/14/2016 11:14 PM, Andrzej Hajda wrote:
> On 14.12.2016 07:04, Hoegeun Kwon wrote:
>> This patch add support for MIPI-DSI based S6E3HA2 AMOLED panel
>> driver. This panel has 1440x2560 resolution in 5.7-inch physical
>> panel in the TM2 device.
>>
>> Signed-off-by: Donghwa Lee <[email protected]>
>> Signed-off-by: Hyungwon Hwang <[email protected]>
>> Signed-off-by: Hoegeun Kwon <[email protected]>
> Hi Hoegeun Kwon,
>
> Is there a reason to upstream obsolete driver? Current version of the
> driver is available at [1]. It differs significantly and contains
> multiple fixes and improvements. I guess it still requires some
> polishing but it is better base for start.
>
> [1]:
> https://review.tizen.org/git/?p=platform/kernel/linux-exynos.git;a=blob;f=drivers/gpu/drm/panel/panel-s6e3ha2.c;hb=refs/heads/tizen
>
> Regards
> Andrzej
Hi Andrzej Hajda,
The current driver focus on basic functionality. Therefore, VR and HMT
modes in [1] have been removed from the patch. VR and HMT modes
are added after the basic functions are reflected.
Best Regards,
Hoegeun Kwon
> _______________________________________________
> dri-devel mailing list
> [email protected]
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
On Wed, Dec 14, 2016 at 03:04:04PM +0900, Hoegeun Kwon wrote:
> This patch add support for MIPI-DSI based S6E3HA2 AMOLED panel
> driver. This panel has 1440x2560 resolution in 5.7-inch physical
> panel in the TM2 device.
>
> Signed-off-by: Donghwa Lee <[email protected]>
> Signed-off-by: Hyungwon Hwang <[email protected]>
> Signed-off-by: Hoegeun Kwon <[email protected]>
> ---
> .../bindings/display/panel/samsung,s6e3ha2.txt | 52 ++
> drivers/gpu/drm/panel/Kconfig | 6 +
> drivers/gpu/drm/panel/Makefile | 1 +
> drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c | 756 +++++++++++++++++++++
> 4 files changed, 815 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
> create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c
>
> diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
> new file mode 100644
> index 0000000..1f41f24
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
> @@ -0,0 +1,52 @@
> +Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel
> +
> +Required properties:
> + - compatible: "samsung,s6e3ha2"
> + - reg: the virtual channel number of a DSI peripheral
> + - vdd3-supply: core voltage supply
> + - vci-supply: voltage supply for analog circuits
> + - reset-gpios: a GPIO spec for the reset pin
> + - enable-gpios: a GPIO spec for the panel enable pin
> + - te-gpios: a GPIO spec for the tearing effect synchronization signal gpio pin
Need to specify the GPIOs as active high or low.
> +
> +Optional properties:
> + - display-timings: timings for the connected panel as described by [1]
> +
> +The device node can contain one 'port' child node with one child
> +'endpoint' node, according to the bindings defined in [2]. This
> +node should describe panel's video bus.
> +
> +[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
> +[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
> +
> +Example:
> +
> + panel@0 {
> + compatible = "samsung,s6e3ha2";
> + reg = <0>;
reg doesn't really work here unless this node is a child of the DSI
controller node. But if it is a child node, then you don't need the OF
graph.
> + vdd3-supply = <&ldo27_reg>;
> + vci-supply = <&ldo28_reg>;
> + reset-gpios = <&gpg0 0 GPIO_ACTIVE_HIGH>;
> + enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
> + te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
> +
> + display-timings {
> + timing-0 {
> + clock-frequency = <0>;
> + hactive = <1440>;
> + vactive = <2560>;
> + hfront-porch = <1>;
> + hback-porch = <1>;
> + hsync-len = <1>;
> + vfront-porch = <1>;
> + vback-porch = <15>;
> + vsync-len = <1>;
> + };
> + };
> +
> + port {
> + dsi_in: endpoint {
> + remote-endpoint = <&dsi_out>;
> + };
> + };
> + };
On 12/20/2016 03:55 AM, Rob Herring wrote:
> On Wed, Dec 14, 2016 at 03:04:04PM +0900, Hoegeun Kwon wrote:
>> This patch add support for MIPI-DSI based S6E3HA2 AMOLED panel
>> driver. This panel has 1440x2560 resolution in 5.7-inch physical
>> panel in the TM2 device.
>>
>> Signed-off-by: Donghwa Lee <[email protected]>
>> Signed-off-by: Hyungwon Hwang <[email protected]>
>> Signed-off-by: Hoegeun Kwon <[email protected]>
>> ---
>> .../bindings/display/panel/samsung,s6e3ha2.txt | 52 ++
>> drivers/gpu/drm/panel/Kconfig | 6 +
>> drivers/gpu/drm/panel/Makefile | 1 +
>> drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c | 756 +++++++++++++++++++++
>> 4 files changed, 815 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
>> create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c
>>
>> diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
>> new file mode 100644
>> index 0000000..1f41f24
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
>> @@ -0,0 +1,52 @@
>> +Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel
>> +
>> +Required properties:
>> + - compatible: "samsung,s6e3ha2"
>> + - reg: the virtual channel number of a DSI peripheral
>> + - vdd3-supply: core voltage supply
>> + - vci-supply: voltage supply for analog circuits
>> + - reset-gpios: a GPIO spec for the reset pin
>> + - enable-gpios: a GPIO spec for the panel enable pin
>> + - te-gpios: a GPIO spec for the tearing effect synchronization signal gpio pin
> Need to specify the GPIOs as active high or low.
Hi Rob Herring,
Thanks for point out. I will add "(active high or low)" after the
description of the GPIOs.
>> +
>> +Optional properties:
>> + - display-timings: timings for the connected panel as described by [1]
>> +
>> +The device node can contain one 'port' child node with one child
>> +'endpoint' node, according to the bindings defined in [2]. This
>> +node should describe panel's video bus.
>> +
>> +[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
>> +[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
>> +
>> +Example:
>> +
>> + panel@0 {
>> + compatible = "samsung,s6e3ha2";
>> + reg = <0>;
> reg doesn't really work here unless this node is a child of the DSI
> controller node. But if it is a child node, then you don't need the OF
> graph.
The reg value is used in virtual child panel node so I think the reg
value is needed.
Please refer to the document below.
Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
Best Regards,
Hoegeun Kwon
>> + vdd3-supply = <&ldo27_reg>;
>> + vci-supply = <&ldo28_reg>;
>> + reset-gpios = <&gpg0 0 GPIO_ACTIVE_HIGH>;
>> + enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
>> + te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
>> +
>> + display-timings {
>> + timing-0 {
>> + clock-frequency = <0>;
>> + hactive = <1440>;
>> + vactive = <2560>;
>> + hfront-porch = <1>;
>> + hback-porch = <1>;
>> + hsync-len = <1>;
>> + vfront-porch = <1>;
>> + vback-porch = <15>;
>> + vsync-len = <1>;
>> + };
>> + };
>> +
>> + port {
>> + dsi_in: endpoint {
>> + remote-endpoint = <&dsi_out>;
>> + };
>> + };
>> + };
> _______________________________________________
> dri-devel mailing list
> [email protected]
> https://lists.freedesktop.org/mailman/listinfo/dri-devel