Add GFX%rc6 and GFXMHz to the column descriptions section
of the turbostat man page.
Signed-off-by: Doug Smythies <[email protected]>
---
tools/power/x86/turbostat/turbostat.8 | 2 ++
1 file changed, 2 insertions(+)
diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8
index fedca32..ccf2a69 100644
--- a/tools/power/x86/turbostat/turbostat.8
+++ b/tools/power/x86/turbostat/turbostat.8
@@ -100,6 +100,8 @@ The system configuration dump (if --quiet is not used) is followed by statistics
\fBCPU%c1, CPU%c3, CPU%c6, CPU%c7\fP show the percentage residency in hardware core idle states. These numbers are from hardware residency counters.
\fBCoreTmp\fP Degrees Celsius reported by the per-core Digital Thermal Sensor.
\fBPkgTtmp\fP Degrees Celsius reported by the per-package Package Thermal Monitor.
+\fBGFX%rc6\fP The percentage of time the GPU is in the "render C6" state, rc6, during the measurement interval. From /sys/class/drm/card0/power/rc6_residency_ms.
+\fBGFXMHz\fP Instantaneous snapshot of what sysfs presents at the end of the measurement interval. From /sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz.
\fBPkg%pc2, Pkg%pc3, Pkg%pc6, Pkg%pc7\fP percentage residency in hardware package idle states. These numbers are from hardware residency counters.
\fBPkgWatt\fP Watts consumed by the whole package.
\fBCorWatt\fP Watts consumed by the core part of the package.
--
2.7.4
Applied -- Thanks!
Len Brown, Intel Open Source Technology Center
On Saturday, March 04, 2017 06:36:29 PM Len Brown wrote:
> Applied -- Thanks!
I guess I should include this into fixes too?
Or are you going to send a pull request with it to me?
Thanks,
Rafael
> On Saturday, March 04, 2017 06:36:29 PM Len Brown wrote:
> > Applied -- Thanks!
>
> I guess I should include this into fixes too?
>
> Or are you going to send a pull request with it to me?
When I apply it, you don't have to.
I have a couple of other fixes being tested on my turbostat branch now,
and this is in w/ those.
thanks,
-Len