The usdhc3 interface is connected to a soldered eMMC chip on all boards
that import this dtsi. Adding these properties speeds up the device probe
during boot.
Signed-off-by: Robin van der Gracht <[email protected]>
---
arch/arm/boot/dts/imx6qdl-prti6q.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
index 19578f660b09..f0db0d4471f4 100644
--- a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
@@ -94,6 +94,9 @@ &usdhc3 {
pinctrl-0 = <&pinctrl_usdhc3>;
bus-width = <8>;
non-removable;
+ no-1-8-v;
+ no-sd;
+ no-sdio;
status = "okay";
};
--
2.34.1
On 21.06.22 16:03, Robin van der Gracht wrote:
> The usdhc3 interface is connected to a soldered eMMC chip on all boards
> that import this dtsi. Adding these properties speeds up the device probe
> during boot.
>
> Signed-off-by: Robin van der Gracht <[email protected]>
Reviewed-by: Ahmad Fatoum <[email protected]>
> ---
> arch/arm/boot/dts/imx6qdl-prti6q.dtsi | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
> index 19578f660b09..f0db0d4471f4 100644
> --- a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
> @@ -94,6 +94,9 @@ &usdhc3 {
> pinctrl-0 = <&pinctrl_usdhc3>;
> bus-width = <8>;
> non-removable;
> + no-1-8-v;
> + no-sd;
> + no-sdio;
> status = "okay";
> };
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
On Tue, Jun 21, 2022 at 04:03:34PM +0200, Robin van der Gracht wrote:
> The usdhc3 interface is connected to a soldered eMMC chip on all boards
> that import this dtsi. Adding these properties speeds up the device probe
> during boot.
>
> Signed-off-by: Robin van der Gracht <[email protected]>
Applied, thanks!