Three small fixes, all in drivers.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes
The short changelog is:
Michael Kelley (1):
scsi: storvsc: Limit max_sectors for virtual Fibre Channel devices
Steffen Maier (1):
scsi: zfcp: Defer fc_rport blocking until after ADISC response
Yang Yingliang (1):
scsi: pm80xx: Fix error return code in pm8001_pci_probe()
And the diffstat:
drivers/s390/scsi/zfcp_fc.c | 6 +-----
drivers/scsi/pm8001/pm8001_init.c | 3 ++-
drivers/scsi/storvsc_drv.c | 4 ++++
3 files changed, 7 insertions(+), 6 deletions(-)
With full diff below.
James
---
diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index f21307537829..4f0d0e55f0d4 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -534,8 +534,7 @@ static void zfcp_fc_adisc_handler(void *data)
/* re-init to undo drop from zfcp_fc_adisc() */
port->d_id = ntoh24(adisc_resp->adisc_port_id);
- /* port is good, unblock rport without going through erp */
- zfcp_scsi_schedule_rport_register(port);
+ /* port is still good, nothing to do */
out:
atomic_andnot(ZFCP_STATUS_PORT_LINK_TEST, &port->status);
put_device(&port->dev);
@@ -595,9 +594,6 @@ void zfcp_fc_link_test_work(struct work_struct *work)
int retval;
set_worker_desc("zadisc%16llx", port->wwpn); /* < WORKER_DESC_LEN=24 */
- get_device(&port->dev);
- port->rport_task = RPORT_DEL;
- zfcp_scsi_rport_work(&port->rport_work);
/* only issue one test command at one time per port */
if (atomic_read(&port->status) & ZFCP_STATUS_PORT_LINK_TEST)
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 2e886c1d867d..4995e1ef4e0e 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -1181,7 +1181,8 @@ static int pm8001_pci_probe(struct pci_dev *pdev,
pm80xx_set_thermal_config(pm8001_ha);
}
- if (pm8001_init_sas_add(pm8001_ha))
+ rc = pm8001_init_sas_add(pm8001_ha);
+ if (rc)
goto err_out_shost;
/* phy setting support for motherboard controller */
rc = pm8001_configure_phy_settings(pm8001_ha);
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 7f12d931fe7c..f2823218670a 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -366,6 +366,7 @@ static void storvsc_on_channel_callback(void *context);
#define STORVSC_FC_MAX_LUNS_PER_TARGET 255
#define STORVSC_FC_MAX_TARGETS 128
#define STORVSC_FC_MAX_CHANNELS 8
+#define STORVSC_FC_MAX_XFER_SIZE ((u32)(512 * 1024))
#define STORVSC_IDE_MAX_LUNS_PER_TARGET 64
#define STORVSC_IDE_MAX_TARGETS 1
@@ -2006,6 +2007,9 @@ static int storvsc_probe(struct hv_device *device,
* protecting it from any weird value.
*/
max_xfer_bytes = round_down(stor_device->max_transfer_bytes, HV_HYP_PAGE_SIZE);
+ if (is_fc)
+ max_xfer_bytes = min(max_xfer_bytes, STORVSC_FC_MAX_XFER_SIZE);
+
/* max_hw_sectors_kb */
host->max_sectors = max_xfer_bytes >> 9;
/*
The pull request you sent on Mon, 31 Jul 2023 13:55:48 -0400:
> git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes
has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/79d65ee53b968c006ad382a4d4c2dccd898706f9
Thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/prtracker.html