Infineon DPS310 is a barometric pressure and temperature sensor.
Signed-off-by: Ninad Palsule <[email protected]>
---
Documentation/devicetree/bindings/trivial-devices.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 430a814f64a5..22b7a29876d3 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -133,6 +133,8 @@ properties:
- ibm,cffps1
# IBM Common Form Factor Power Supply Versions 2
- ibm,cffps2
+ # Infineon barometric pressure and temperature sensor
+ - infineon,dps310
# Infineon IR36021 digital POL buck controller
- infineon,ir36021
# Infineon IR38060 Voltage Regulator
--
2.39.2
On 11/01/2024 19:12, Ninad Palsule wrote:
> Infineon DPS310 is a barometric pressure and temperature sensor.
>
> Signed-off-by: Ninad Palsule <[email protected]>
This is a friendly reminder during the review process.
It looks like you received a tag and forgot to add it.
If you do not know the process, here is a short explanation:
Please add Acked-by/Reviewed-by/Tested-by tags when posting new
versions, under or above your Signed-off-by tag. Tag is "received", when
provided in a message replied to you on the mailing list. Tools like b4
can help here. However, there's no need to repost patches *only* to add
the tags. The upstream maintainer will do that for tags received on the
version they apply.
https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577
If a tag was not added on purpose, please state why and what changed.
Best regards,
Krzysztof
Hello Krzysztof,
On 1/11/24 13:40, Krzysztof Kozlowski wrote:
> On 11/01/2024 19:12, Ninad Palsule wrote:
>> Infineon DPS310 is a barometric pressure and temperature sensor.
>>
>> Signed-off-by: Ninad Palsule <[email protected]>
> This is a friendly reminder during the review process.
>
> It looks like you received a tag and forgot to add it.
>
> If you do not know the process, here is a short explanation:
> Please add Acked-by/Reviewed-by/Tested-by tags when posting new
> versions, under or above your Signed-off-by tag. Tag is "received", when
> provided in a message replied to you on the mailing list. Tools like b4
> can help here. However, there's no need to repost patches *only* to add
> the tags. The upstream maintainer will do that for tags received on the
> version they apply.
>
> https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577
>
> If a tag was not added on purpose, please state why and what changed.
This is a mistake from my side. Sorry about that. I will remember it
next time.
Thanks & Regards,
Ninad