On 11/14/23 05:56, [email protected] wrote:
> From: Shiju Jose <[email protected]>
>
> CXL spec 3.1 section 8.2.9.9.11.2 describes the DDR5 Error Check Scrub (ECS)
> control feature.
>
> The Error Check Scrub (ECS) is a feature defined in JEDEC DDR5 SDRAM
> Specification (JESD79-5) and allows the DRAM to internally read, correct
> single-bit errors, and write back corrected data bits to the DRAM array
> while providing transparency to error counts. The ECS control feature
> allows the request to configure ECS input configurations during system
> boot or at run-time.
>
> The ECS control allows the requester to change the log entry type, the ECS
> threshold count provided that the request is within the definition
> specified in DDR5 mode registers, change mode between codeword mode and
> row count mode, and reset the ECS counter.
>
> Signed-off-by: Shiju Jose <[email protected]>
> ---
> drivers/cxl/core/memscrub.c | 557 +++++++++++++++++++++++++++++++++++-
> drivers/cxl/cxlmem.h | 2 +
> drivers/cxl/pci.c | 2 +
> 3 files changed, 559 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/cxl/core/memscrub.c b/drivers/cxl/core/memscrub.c
> index ec67ffc81363..1c7031166ba0 100644
> --- a/drivers/cxl/core/memscrub.c
> +++ b/drivers/cxl/core/memscrub.c
> @@ -5,9 +5,9 @@
> * Copyright (c) 2023 HiSilicon Limited.
> *
> * - Provides functions to configure patrol scrub
> - * feature of the CXL memory devices.
> + * and DDR5 ECS features of the CXL memory devices.
> * - Registers with the scrub driver for the
> - * memory patrol scrub feature.
> + * memory patrol scrub and DDR5 ECS features.
> */
>
> #define pr_fmt(fmt) "CXL_MEM_SCRUB: " fmt
> @@ -453,3 +453,556 @@ int cxl_mem_patrol_scrub_init(struct cxl_memdev *cxlmd)
> return ret;
> }
> EXPORT_SYMBOL_NS_GPL(cxl_mem_patrol_scrub_init, CXL);
> +
> +/* CXL DDR5 ECS control definitions */
> +#define CXL_MEMDEV_ECS_GET_FEAT_VERSION 0x01
> +#define CXL_MEMDEV_ECS_SET_FEAT_VERSION 0x01
> +
> +#define CXL_DDR5_ECS "cxl_ecs"
> +
> +/* The default number of regions for CXL memory device patrol scrubber */
> +#define CXL_MEMDEV_ECS_NUM_REGIONS 1
> +
> +static const uuid_t cxl_ecs_uuid =
> + UUID_INIT(0xe5b13f22, 0x2328, 0x4a14, 0xb8, 0xba, 0xb9, 0x69, 0x1e, \
> + 0x89, 0x33, 0x86);
> +
> +/* CXL DDR5 ECS control functions */
> +struct cxl_ecs_context {
> + struct device *dev;
> + u16 nregions;
> + u16 get_feat_size;
> + u16 set_feat_size;
> +};
> +
> +/**
> + * struct cxl_memdev_ecs_params - CXL memory DDR5 ECS parameter data structure.
> + * @log_entry_type: ECS log entry type, per DRAM or per memory media FRU.
> + * @threshold: ECS threshold count per GB of memory cells.
> + * @mode: codeword/row count mode
> + * 0 : ECS counts rows with errors
> + * 1 : ECS counts codeword with errors
> + * @reset_counter: [IN] reset ECC counter to default value.
> + * @log_entry_type_avail: Supported ECS log entry types.
> + * @threshold_avail: Supported ECS threshold counts.
> + * @mode_avail: Supported ECS count mode.
> + */
> +struct cxl_memdev_ecs_params {
> + u8 log_entry_type;
> + u16 threshold;
> + u8 mode;
> + bool reset_counter;
> + char log_entry_type_avail[CXL_SCRUB_MAX_ATTRB_RANGE_LENGTH];
> + char threshold_avail[CXL_SCRUB_MAX_ATTRB_RANGE_LENGTH];
> + char mode_avail[CXL_SCRUB_MAX_ATTRB_RANGE_LENGTH];
> +};
> +
> +enum {
> + CXL_MEMDEV_ECS_PARAM_LOG_ENTRY_TYPE = 0,
> + CXL_MEMDEV_ECS_PARAM_THRESHOLD,
> + CXL_MEMDEV_ECS_PARAM_MODE,
> + CXL_MEMDEV_ECS_PARAM_RESET_COUNTER,
> +};
> +
> +#define CXL_MEMDEV_ECS_LOG_ENTRY_TYPE_MASK GENMASK(1, 0)
> +#define CXL_MEMDEV_ECS_REALTIME_REPORT_CAP_MASK BIT(0)
> +#define CXL_MEMDEV_ECS_THRESHOLD_COUNT_MASK GENMASK(2, 0)
> +#define CXL_MEMDEV_ECS_MODE_MASK BIT(3)
> +#define CXL_MEMDEV_ECS_RESET_COUNTER_MASK BIT(4)
> +
> +static const u16 ecs_supp_threshold[] = { 0, 0, 0, 256, 1024, 4096 };
> +
> +enum {
> + ECS_LOG_ENTRY_TYPE_DRAM = 0x0,
> + ECS_LOG_ENTRY_TYPE_MEM_MEDIA_FRU = 0x1,
> +};
> +
> +enum {
> + ECS_THRESHOLD_256 = 3,
> + ECS_THRESHOLD_1024 = 4,
> + ECS_THRESHOLD_4096 = 5,
> +};
> +
> +enum {
> + ECS_MODE_COUNTS_ROWS = 0,
> + ECS_MODE_COUNTS_CODEWORDS = 1,
> +};
> +
> +struct cxl_memdev_ecs_feat_read_attrbs {
> + u8 ecs_log_cap;
> + u8 ecs_cap;
> + __le16 ecs_config;
> + u8 ecs_flags;
> +} __packed;
> +
> +struct cxl_memdev_ecs_set_feat_pi {
> + struct cxl_mbox_set_feat_in pi;
> + struct cxl_memdev_ecs_feat_wr_attrbs {
> + u8 ecs_log_cap;
> + __le16 ecs_config;
> + } __packed wr_attrbs[];
> +} __packed;
> +
> +static int cxl_mem_ecs_get_attrbs(struct device *dev, int fru_id,
> + struct cxl_memdev_ecs_params *params)
> +{
> + struct cxl_memdev *cxlmd = to_cxl_memdev(dev->parent);
> + struct cxl_dev_state *cxlds = cxlmd->cxlds;
> + struct cxl_memdev_state *mds = to_cxl_memdev_state(cxlds);
> + struct cxl_mbox_get_feat_in pi = {
> + .uuid = cxl_ecs_uuid,
> + .offset = 0,
> + .selection = CXL_GET_FEAT_CURRENT_VALUE,
> + };
> + struct cxl_memdev_ecs_feat_read_attrbs *rd_attrbs;
> + struct cxl_ecs_context *cxl_ecs_ctx;
> + u8 threshold_index;
> +
> + if (!mds)
> + return -EFAULT;
> + cxl_ecs_ctx = dev_get_drvdata(dev);
> +
> + pi.count = cxl_ecs_ctx->get_feat_size;
> + rd_attrbs = cxl_get_feature(mds, &pi);
> + if (PTR_ERR_OR_ZERO(rd_attrbs)) {
Why not just IS_ERR()?
> + params->log_entry_type = 0;
> + params->threshold = 0;
> + params->mode = 0;
> + snprintf(params->log_entry_type_avail, CXL_SCRUB_MAX_ATTRB_RANGE_LENGTH,
> + "Unavailable");
> + snprintf(params->threshold_avail, CXL_SCRUB_MAX_ATTRB_RANGE_LENGTH,
> + "Unavailable");
> + snprintf(params->mode_avail, CXL_SCRUB_MAX_ATTRB_RANGE_LENGTH,
> + "Unavailable");
Given that these are static values, maybe change the string params to enums and then have a static string table you can index to?
> + return PTR_ERR_OR_ZERO(rd_attrbs);
at this point you can just return PTR_ERR()
> + }
> + params->log_entry_type = FIELD_GET(CXL_MEMDEV_ECS_LOG_ENTRY_TYPE_MASK,
> + rd_attrbs[fru_id].ecs_log_cap);
> + threshold_index = FIELD_GET(CXL_MEMDEV_ECS_THRESHOLD_COUNT_MASK,
> + rd_attrbs[fru_id].ecs_config);
> + params->threshold = ecs_supp_threshold[threshold_index];
> + params->mode = FIELD_GET(CXL_MEMDEV_ECS_MODE_MASK,
> + rd_attrbs[fru_id].ecs_config);
> + snprintf(params->log_entry_type_avail, CXL_SCRUB_MAX_ATTRB_RANGE_LENGTH,
> + "Log Entry Type 0:per DRAM 1:per Memory Media FRU");
> + snprintf(params->threshold_avail, CXL_SCRUB_MAX_ATTRB_RANGE_LENGTH,
> + "Threshold count per Gb of memory cells: 256,1024,4096");
> + snprintf(params->mode_avail, CXL_SCRUB_MAX_ATTRB_RANGE_LENGTH,
> + "Mode 0:ECS counts rows with errors 1:ECS counts codewords with errors");
> +
> + kvfree(rd_attrbs);
> +
> + return 0;
> +}
> +
> +static int cxl_mem_ecs_set_attrbs(struct device *dev, int fru_id,
> + struct cxl_memdev_ecs_params *params, u8 param_type)
> +{
> + int ret = 0;
> + u32 set_pi_size;
> + u16 nmedia_frus, count;
> + struct cxl_memdev_ecs_set_feat_pi *set_pi;
> + struct cxl_memdev *cxlmd = to_cxl_memdev(dev->parent);
> + struct cxl_dev_state *cxlds = cxlmd->cxlds;
> + struct cxl_memdev_state *mds = to_cxl_memdev_state(cxlds);
> + struct cxl_mbox_get_feat_in pi = {
> + .uuid = cxl_ecs_uuid,
> + .offset = 0,
> + .selection = CXL_GET_FEAT_CURRENT_VALUE,
> + };
> + struct cxl_memdev_ecs_feat_read_attrbs *rd_attrbs;
> + struct cxl_memdev_ecs_feat_wr_attrbs *wr_attrbs;
> + struct cxl_ecs_context *cxl_ecs_ctx;
> + struct cxl_memdev_ecs_params rd_params;
> +
> + if (!mds)
> + return -EFAULT;
> +
> + cxl_ecs_ctx = dev_get_drvdata(dev);
> + nmedia_frus = cxl_ecs_ctx->nregions;
> +
> + pi.count = cxl_ecs_ctx->get_feat_size;
> + rd_attrbs = cxl_get_feature(mds, &pi);
> + if (PTR_ERR_OR_ZERO(rd_attrbs))
> + return PTR_ERR_OR_ZERO(rd_attrbs);
if (IS_ERR(rd_attribs))
return PTR_ERR(rd_attrbs);
> + set_pi_size = sizeof(struct cxl_mbox_set_feat_in) +
> + cxl_ecs_ctx->set_feat_size;
> + set_pi = kvmalloc(set_pi_size, GFP_KERNEL);
I think you can use the auto clean declaration. Then you don't need to call kvfree() every time you return with error or use the goto.
struct cxl_memdev_ecs_set_feat_pi *set_pi __free(kvfree) = kvmalloc(set_pi_size, GFP_KERNEL);
https://lwn.net/Articles/934679/
> + if (!set_pi) {
> + kvfree(rd_attrbs);
> + return -ENOMEM;
> + }
> +
> + set_pi->pi.uuid = cxl_ecs_uuid;
> + set_pi->pi.flags = CXL_SET_FEAT_FLAG_MOD_VALUE_SAVED_ACROSS_RESET |
> + CXL_SET_FEAT_FLAG_ACTION_FULL_DATA_TRANSFER;
> + set_pi->pi.offset = 0;
> + set_pi->pi.version = CXL_MEMDEV_ECS_SET_FEAT_VERSION;
> + /* Fill writable attributes from the current attributes read for all the media FRUs */
> + count = 0;
> + wr_attrbs = set_pi->wr_attrbs;
> + while (count < nmedia_frus) {
for loop?
> + wr_attrbs[count].ecs_log_cap = rd_attrbs[count].ecs_log_cap;
> + wr_attrbs[count].ecs_config = rd_attrbs[count].ecs_config;
> + count++;
> + }
> + kvfree(rd_attrbs);
Maybe cxl_get_feature() should take a ptr to an allocated rd_attrbs rather than doing the allocation then expect the caller to free it.
> +
> + /* Fill attribute to be set for the media FRU */
> + if (param_type == CXL_MEMDEV_ECS_PARAM_LOG_ENTRY_TYPE) {
I think this entire if/else block can be setup as a switch block since it's checking aainst param_type for all branches?
> + if (params->log_entry_type != ECS_LOG_ENTRY_TYPE_DRAM &&
> + params->log_entry_type != ECS_LOG_ENTRY_TYPE_MEM_MEDIA_FRU) {
> + dev_err(dev->parent,
> + "Invalid CXL ECS scrub log entry type(%d) to set\n",
> + params->log_entry_type);
> + dev_err(dev->parent,
> + "Log Entry Type 0: per DRAM 1: per Memory Media FRU\n");
> + ret = -EINVAL;
> + goto set_attrbs_exit;
> + }
> + wr_attrbs[fru_id].ecs_log_cap = FIELD_PREP(CXL_MEMDEV_ECS_LOG_ENTRY_TYPE_MASK,
> + params->log_entry_type);
> + } else if (param_type == CXL_MEMDEV_ECS_PARAM_THRESHOLD) {
> + wr_attrbs[fru_id].ecs_config &= ~CXL_MEMDEV_ECS_THRESHOLD_COUNT_MASK;
> + switch (params->threshold) {
> + case 256:
> + wr_attrbs[fru_id].ecs_config |= FIELD_PREP(
> + CXL_MEMDEV_ECS_THRESHOLD_COUNT_MASK,
> + ECS_THRESHOLD_256);
> + break;
> + case 1024:
> + wr_attrbs[fru_id].ecs_config |= FIELD_PREP(
> + CXL_MEMDEV_ECS_THRESHOLD_COUNT_MASK,
> + ECS_THRESHOLD_1024);
> + break;
> + case 4096:
> + wr_attrbs[fru_id].ecs_config |= FIELD_PREP(
> + CXL_MEMDEV_ECS_THRESHOLD_COUNT_MASK,
> + ECS_THRESHOLD_4096);
> + break;
> + default:
> + dev_err(dev->parent,
> + "Invalid CXL ECS scrub threashol count(%d) to set\n",
> + params->threshold);
> + dev_err(dev->parent,
> + "Threshold count per Gb pf memory cells: 256,1024,4096\n");
> + ret = -EINVAL;
> + goto set_attrbs_exit;
> + }
> + } else if (param_type == CXL_MEMDEV_ECS_PARAM_MODE) {
> + if (params->mode != ECS_MODE_COUNTS_ROWS &&
> + params->mode != ECS_MODE_COUNTS_CODEWORDS) {
> + dev_err(dev->parent,
> + "Invalid CXL ECS scrub mode(%d) to set\n",
> + params->mode);
> + dev_err(dev->parent,
> + "Mode 0: ECS counts rows with errors"
> + " 1: ECS counts codewords with errors\n");
> + ret = -EINVAL;
> + goto set_attrbs_exit;
> + }
> + wr_attrbs[fru_id].ecs_config &= ~CXL_MEMDEV_ECS_MODE_MASK;
> + wr_attrbs[fru_id].ecs_config |= FIELD_PREP(CXL_MEMDEV_ECS_MODE_MASK,
> + params->mode);
> + } else if (param_type == CXL_MEMDEV_ECS_PARAM_RESET_COUNTER) {
> + wr_attrbs[fru_id].ecs_config &= ~CXL_MEMDEV_ECS_RESET_COUNTER_MASK;
> + wr_attrbs[fru_id].ecs_config |= FIELD_PREP(CXL_MEMDEV_ECS_RESET_COUNTER_MASK,
> + params->reset_counter);
> + } else {
> + dev_err(dev->parent, "Invalid CXL ECS parameter to set\n");
> + ret = -EINVAL;
> + goto set_attrbs_exit;
> + }
> +
> + ret = cxl_set_feature(mds, set_pi, set_pi_size);
> + if (ret) {
> + dev_err(dev->parent, "CXL ECS set feature fail ret=%d\n", ret);
> + goto set_attrbs_exit;
> + }
> +
> + /* Verify attribute is set successfully */
> + ret = cxl_mem_ecs_get_attrbs(dev, fru_id, &rd_params);
> + if (ret) {
> + dev_err(dev->parent, "Get cxlmemdev ECS params fail ret=%d\n", ret);
> + return ret;
Leaking set_pi, but shouldn't be an issue once you go to autoclean. Same with switch block below.
> + }
> + switch (param_type) {
> + case CXL_MEMDEV_ECS_PARAM_LOG_ENTRY_TYPE:
> + if (rd_params.log_entry_type != params->log_entry_type)
> + return -EFAULT;
> + break;
> + case CXL_MEMDEV_ECS_PARAM_THRESHOLD:
> + if (rd_params.threshold != params->threshold)
> + return -EFAULT;
> + break;
> + case CXL_MEMDEV_ECS_PARAM_MODE:
> + if (rd_params.mode != params->mode)
> + return -EFAULT;
> + break;
> + }
> +
> +set_attrbs_exit:
> + kvfree(set_pi);
> + return ret;
> +}
> +
> +static int cxl_mem_ecs_log_entry_type_write(struct device *dev, int region_id, long val)
> +{
> + int ret;
> + struct cxl_memdev_ecs_params params;
> +
> + params.log_entry_type = val;
> + ret = cxl_mem_ecs_set_attrbs(dev, region_id, ¶ms,
> + CXL_MEMDEV_ECS_PARAM_LOG_ENTRY_TYPE);
> + if (ret) {
> + dev_err(dev->parent, "Set CXL ECS params for log entry type fail ret=%d\n",
> + ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int cxl_mem_ecs_threshold_write(struct device *dev, int region_id, long val)
> +{
> + int ret;
> + struct cxl_memdev_ecs_params params;
> +
> + params.threshold = val;
> + ret = cxl_mem_ecs_set_attrbs(dev, region_id, ¶ms,
> + CXL_MEMDEV_ECS_PARAM_THRESHOLD);
> + if (ret) {
> + dev_err(dev->parent, "Set CXL ECS params for threshold fail ret=%d\n",
> + ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int cxl_mem_ecs_mode_write(struct device *dev, int region_id, long val)
> +{
> + int ret;
> + struct cxl_memdev_ecs_params params;
> +
> + params.mode = val;
> + ret = cxl_mem_ecs_set_attrbs(dev, region_id, ¶ms,
> + CXL_MEMDEV_ECS_PARAM_MODE);
> + if (ret) {
> + dev_err(dev->parent, "Set CXL ECS params for mode fail ret=%d\n",
> + ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int cxl_mem_ecs_reset_counter_write(struct device *dev, int region_id, long val)
> +{
> + int ret;
> + struct cxl_memdev_ecs_params params;
> +
> + params.reset_counter = val;
> + ret = cxl_mem_ecs_set_attrbs(dev, region_id, ¶ms,
> + CXL_MEMDEV_ECS_PARAM_RESET_COUNTER);
> + if (ret) {
> + dev_err(dev->parent, "Set CXL ECS params for reset ECC counter fail ret=%d\n",
> + ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * cxl_mem_ecs_is_visible() - Callback to return attribute visibility
> + * @drv_data: Pointer to driver-private data structure passed
> + * as argument to devm_scrub_device_register().
> + * @attr: Scrub attribute
> + * @region_id: ID of the memory region
> + *
> + * Returns: 0 on success, an error otherwise
> + */
> +static umode_t cxl_mem_ecs_is_visible(const void *drv_data, u32 attr, int region_id)
> +{
> + switch (attr) {
> + case scrub_reset_counter:
> + return 0200;
> + case scrub_ecs_log_entry_type_per_dram:
> + case scrub_ecs_log_entry_type_per_memory_media:
> + case scrub_mode_counts_rows:
> + case scrub_mode_counts_codewords:
> + case scrub_threshold_available:
> + return 0444;
> + case scrub_ecs_log_entry_type:
> + case scrub_mode:
> + case scrub_threshold:
> + return 0644;
> + default:
> + return 0;
> + }
> +}
> +
> +/**
> + * cxl_mem_ecs_read() - Read callback for data attributes
> + * @dev: Pointer to scrub device
> + * @attr: Scrub attribute
> + * @region_id: ID of the memory region
> + * @val: Pointer to the returned data
> + *
> + * Returns: 0 on success, an error otherwise
> + */
> +static int cxl_mem_ecs_read(struct device *dev, u32 attr, int region_id, u64 *val)
> +{
> + int ret;
> + struct cxl_memdev_ecs_params params;
> +
> + if (attr == scrub_ecs_log_entry_type ||
> + attr == scrub_ecs_log_entry_type_per_dram ||
> + attr == scrub_ecs_log_entry_type_per_memory_media ||
> + attr == scrub_mode ||
> + attr == scrub_mode_counts_rows ||
> + attr == scrub_mode_counts_codewords ||
> + attr == scrub_threshold) {
> + ret = cxl_mem_ecs_get_attrbs(dev, region_id, ¶ms);
> + if (ret) {
> + dev_err(dev->parent, "Get CXL ECS params fail ret=%d\n", ret);
> + return ret;
> + }
> + }
> +
> + switch (attr) {
> + case scrub_ecs_log_entry_type:
> + *val = params.log_entry_type;
> + return 0;
> + case scrub_ecs_log_entry_type_per_dram:
> + if (params.log_entry_type == ECS_LOG_ENTRY_TYPE_DRAM)
> + *val = 1;
> + else
> + *val = 0;
> + return 0;
> + case scrub_ecs_log_entry_type_per_memory_media:
> + if (params.log_entry_type == ECS_LOG_ENTRY_TYPE_MEM_MEDIA_FRU)
> + *val = 1;
> + else
> + *val = 0;
> + return 0;
> + case scrub_mode:
> + *val = params.mode;
> + return 0;
> + case scrub_mode_counts_rows:
> + if (params.mode == ECS_MODE_COUNTS_ROWS)
> + *val = 1;
> + else
> + *val = 0;
> + return 0;
> + case scrub_mode_counts_codewords:
> + if (params.mode == ECS_MODE_COUNTS_CODEWORDS)
> + *val = 1;
> + else
> + *val = 0;
> + return 0;
> + case scrub_threshold:
> + *val = params.threshold;
> + return 0;
> + default:
> + return -ENOTSUPP;
> + }
> +}
> +
> +/**
> + * cxl_mem_ecs_write() - Write callback for data attributes
> + * @dev: Pointer to scrub device
> + * @attr: Scrub attribute
> + * @region_id: ID of the memory region
> + * @val: Value to write
> + *
> + * Returns: 0 on success, an error otherwise
> + */
> +static int cxl_mem_ecs_write(struct device *dev, u32 attr, int region_id, u64 val)
> +{
> + switch (attr) {
> + case scrub_ecs_log_entry_type:
> + return cxl_mem_ecs_log_entry_type_write(dev, region_id, val);
> + case scrub_mode:
> + return cxl_mem_ecs_mode_write(dev, region_id, val);
> + case scrub_reset_counter:
> + return cxl_mem_ecs_reset_counter_write(dev, region_id, val);
> + case scrub_threshold:
> + return cxl_mem_ecs_threshold_write(dev, region_id, val);
> + default:
> + return -ENOTSUPP;
> + }
> +}
> +
> +/**
> + * cxl_mem_ecs_read_strings() - Read callback for DDR5 ECS string attributes
> + * @dev: Pointer to ECS scrub device
> + * @attr: ECS scrub attribute
> + * @region_id: ID of the memory media FRU.
> + * @buf: Pointer to the buffer for copying returned string
> + *
> + * Returns: 0 on success, an error otherwise
> + */
> +static int cxl_mem_ecs_read_strings(struct device *dev, u32 attr,
> + int region_id, char *buf)
> +{
> +
> + switch (attr) {
> + case scrub_threshold_available:
> + sprintf(buf, "256,1024,4096\n");
sysfs_emit()?
> + return 0;
> + default:
> + return -ENOTSUPP;
> + }
> +}
> +
> +static const struct scrub_ops cxl_ecs_ops = {
> + .is_visible = cxl_mem_ecs_is_visible,
> + .read = cxl_mem_ecs_read,
> + .write = cxl_mem_ecs_write,
> + .read_string = cxl_mem_ecs_read_strings,
> +};
> +
> +int cxl_mem_ddr5_ecs_init(struct cxl_memdev *cxlmd)
> +{
> + int nmedia_frus; /* number of memory media FRUs in the device */
> + int ret = 0;
> + struct device *cxl_scrub_dev;
> + char scrub_name[CXL_MEMDEV_MAX_NAME_LENGTH];
> + struct cxl_mbox_supp_feat_entry feat_entry;
> + struct cxl_ecs_context *cxl_ecs_ctx;
> +
> + ret = cxl_mem_get_supported_feature_entry(cxlmd, &cxl_ecs_uuid, &feat_entry);
> + if (ret < 0)
> + goto cxl_ecs_reg_fail;
> +
> + if (!(feat_entry.attrb_flags & CXL_FEAT_ENTRY_FLAG_CHANGABLE))
> + goto cxl_ecs_init_exit;
> + nmedia_frus = feat_entry.get_feat_size/
> + sizeof(struct cxl_memdev_ecs_feat_read_attrbs);
> + if (nmedia_frus) {
> + cxl_ecs_ctx = devm_kzalloc(&cxlmd->dev, sizeof(*cxl_ecs_ctx), GFP_KERNEL);
> + if (!cxl_ecs_ctx)
> + goto cxl_ecs_init_exit;
> +
> + cxl_ecs_ctx->nregions = nmedia_frus;
> + cxl_ecs_ctx->get_feat_size = feat_entry.get_feat_size;
> + cxl_ecs_ctx->set_feat_size = feat_entry.set_feat_size;
> +
> + snprintf(scrub_name, sizeof(scrub_name), "%s_%s",
> + CXL_DDR5_ECS, dev_name(&cxlmd->dev));
> + cxl_scrub_dev = devm_scrub_device_register(&cxlmd->dev, scrub_name,
> + cxl_ecs_ctx, &cxl_ecs_ops,
> + cxl_ecs_ctx->nregions);
> + if (PTR_ERR_OR_ZERO(cxl_scrub_dev)) {
IS_ERR()?
> + ret = PTR_ERR_OR_ZERO(cxl_scrub_dev);
PTR_ERR()
> + goto cxl_ecs_reg_fail;
> + }
> + }
> +
> +cxl_ecs_reg_fail:
> +cxl_ecs_init_exit:
> + return ret;
Why goto label if it just return directly w/o additional operations?
> +}
> +EXPORT_SYMBOL_NS_GPL(cxl_mem_ddr5_ecs_init, CXL);
> diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
> index 1d0fad0dc5ae..4da0b0ec3b1e 100644
> --- a/drivers/cxl/cxlmem.h
> +++ b/drivers/cxl/cxlmem.h
> @@ -972,8 +972,10 @@ int cxl_clear_poison(struct cxl_memdev *cxlmd, u64 dpa);
> /* cxl memory scrub functions */
> #ifdef CONFIG_CXL_SCRUB
> int cxl_mem_patrol_scrub_init(struct cxl_memdev *cxlmd);
> +int cxl_mem_ddr5_ecs_init(struct cxl_memdev *cxlmd);
> #else
> int cxl_mem_patrol_scrub_init(struct cxl_memdev *cxlmd) { return -ENOTSUP; }
> +int cxl_mem_ddr5_ecs_init(struct cxl_memdev *cxlmd) { return -ENOTSUP; }
> #endif
>
> #ifdef CONFIG_CXL_SUSPEND
> diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
> index 86bba8794bb4..75ce4f41c5c0 100644
> --- a/drivers/cxl/pci.c
> +++ b/drivers/cxl/pci.c
> @@ -886,6 +886,8 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> */
> if (cxl_mem_patrol_scrub_init(cxlmd))
> dev_dbg(&pdev->dev, "cxl_mem_patrol_scrub_init failed\n");
> + if (cxl_mem_ddr5_ecs_init(cxlmd))
> + dev_dbg(&pdev->dev, "cxl_mem_ddr5_ecs_init failed\n");
>
> rc = devm_cxl_sanitize_setup_notifier(&pdev->dev, cxlmd);
> if (rc)