On A64-OLinuXino boards, PG9 is used for USB1 enable/disable. The
port is supplied by DLDO4, which is disabled by default. The patch
adds the regulator as vcc-pg, which is later used by the pinctrl.
Signed-off-by: Stefan Mavrodiev <[email protected]>
---
arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
index 01a9a52edae4..c9d8c9c4ef20 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -163,6 +163,10 @@
status = "okay";
};
+&pio {
+ vcc-pg-supply=<®_dldo4>;
+};
+
&r_rsb {
status = "okay";
--
2.17.1
Hi Stefan,
On Tue, Nov 26, 2019 at 01:05:08PM +0200, Stefan Mavrodiev wrote:
> On A64-OLinuXino boards, PG9 is used for USB1 enable/disable. The
> port is supplied by DLDO4, which is disabled by default. The patch
> adds the regulator as vcc-pg, which is later used by the pinctrl.
>
> Signed-off-by: Stefan Mavrodiev <[email protected]>
> ---
> arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
> index 01a9a52edae4..c9d8c9c4ef20 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
> @@ -163,6 +163,10 @@
> status = "okay";
> };
>
> +&pio {
> + vcc-pg-supply=<®_dldo4>;
The equal sign should have spaces around it.
Also, can you please list all the bank supplies while you're at it?
Thanks!
Maxime
>
On 11/26/19 6:27 PM, Maxime Ripard wrote:
> Hi Stefan,
>
> On Tue, Nov 26, 2019 at 01:05:08PM +0200, Stefan Mavrodiev wrote:
>> On A64-OLinuXino boards, PG9 is used for USB1 enable/disable. The
>> port is supplied by DLDO4, which is disabled by default. The patch
>> adds the regulator as vcc-pg, which is later used by the pinctrl.
>>
>> Signed-off-by: Stefan Mavrodiev <[email protected]>
>> ---
>> arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts | 4 ++++
>> 1 file changed, 4 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
>> index 01a9a52edae4..c9d8c9c4ef20 100644
>> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
>> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
>> @@ -163,6 +163,10 @@
>> status = "okay";
>> };
>>
>> +&pio {
>> + vcc-pg-supply=<®_dldo4>;
> The equal sign should have spaces around it.
>
> Also, can you please list all the bank supplies while you're at it?
Sure. Should the supplies defined as regulators names be added also to
the pio node?
For example reg_aldo1 is named "vcc-pe".
Also, since the commit message will be different for better
representation of the changes, should I send the next
patch as v2 or as a new one?
Best regards,
Stefan
>
> Thanks!
> Maxime
Hi Stefan,
On Wed, Nov 27, 2019 at 09:07:40AM +0200, Stefan Mavrodiev wrote:
> On 11/26/19 6:27 PM, Maxime Ripard wrote:
> > Hi Stefan,
> >
> > On Tue, Nov 26, 2019 at 01:05:08PM +0200, Stefan Mavrodiev wrote:
> > > On A64-OLinuXino boards, PG9 is used for USB1 enable/disable. The
> > > port is supplied by DLDO4, which is disabled by default. The patch
> > > adds the regulator as vcc-pg, which is later used by the pinctrl.
> > >
> > > Signed-off-by: Stefan Mavrodiev <[email protected]>
> > > ---
> > > arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts | 4 ++++
> > > 1 file changed, 4 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
> > > index 01a9a52edae4..c9d8c9c4ef20 100644
> > > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
> > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
> > > @@ -163,6 +163,10 @@
> > > status = "okay";
> > > };
> > >
> > > +&pio {
> > > + vcc-pg-supply=<®_dldo4>;
> > The equal sign should have spaces around it.
> >
> > Also, can you please list all the bank supplies while you're at it?
>
> Sure. Should the supplies defined as regulators names be added also to the
> pio node?
> For example reg_aldo1 is named "vcc-pe".
As far as I can tell, the A64 has regulators for PC, PD, PE, PG and
PL, so you should list those (PL being under r_pio)
> Also, since the commit message will be different for better representation
> of the changes, should I send the next
> patch as v2 or as a new one?
Either way works for me as long as the commit message matches the changes.
Thanks!
Maxime
On 11/28/19 12:33 PM, Maxime Ripard wrote:
Hi Maxime,
> Hi Stefan,
>
> On Wed, Nov 27, 2019 at 09:07:40AM +0200, Stefan Mavrodiev wrote:
>> On 11/26/19 6:27 PM, Maxime Ripard wrote:
>>> Hi Stefan,
>>>
>>> On Tue, Nov 26, 2019 at 01:05:08PM +0200, Stefan Mavrodiev wrote:
>>>> On A64-OLinuXino boards, PG9 is used for USB1 enable/disable. The
>>>> port is supplied by DLDO4, which is disabled by default. The patch
>>>> adds the regulator as vcc-pg, which is later used by the pinctrl.
>>>>
>>>> Signed-off-by: Stefan Mavrodiev <[email protected]>
>>>> ---
>>>> arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts | 4 ++++
>>>> 1 file changed, 4 insertions(+)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
>>>> index 01a9a52edae4..c9d8c9c4ef20 100644
>>>> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
>>>> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
>>>> @@ -163,6 +163,10 @@
>>>> status = "okay";
>>>> };
>>>>
>>>> +&pio {
>>>> + vcc-pg-supply=<®_dldo4>;
>>> The equal sign should have spaces around it.
>>>
>>> Also, can you please list all the bank supplies while you're at it?
>> Sure. Should the supplies defined as regulators names be added also to the
>> pio node?
>> For example reg_aldo1 is named "vcc-pe".
> As far as I can tell, the A64 has regulators for PC, PD, PE, PG and
> PL, so you should list those (PL being under r_pio)
After quick check I've found a bug (maybe?). It's not possible to specify
vcc-pl-supply, because of this:
https://elixir.bootlin.com/linux/latest/source/drivers/pinctrl/sunxi/pinctrl-sunxi.c#L778
During the probe of the pmu, the pinctrl tries to get a regulator, that
doesn't exist yet.
Because of this the system doesn't start (as expected).
I've tried to ignore -EPROBE_DEFER. This seems to work, but only because
the regulator for
PL is defined as "regulator-always-on". The problem is that the refcount
is not incremented.
So if you export one gpio and the unexport it, the regulator will be
disabled. I'm not sure
how this can be resolved.
Should I skip vcc-pl-supply for now and list the other bank supplies?
Stefan
>
>> Also, since the commit message will be different for better representation
>> of the changes, should I send the next
>> patch as v2 or as a new one?
> Either way works for me as long as the commit message matches the changes.
>
> Thanks!
> Maxime
On Fri, Nov 29, 2019 at 3:22 PM Stefan Mavrodiev <[email protected]> wrote:
>
>
> On 11/28/19 12:33 PM, Maxime Ripard wrote:
> Hi Maxime,
> > Hi Stefan,
> >
> > On Wed, Nov 27, 2019 at 09:07:40AM +0200, Stefan Mavrodiev wrote:
> >> On 11/26/19 6:27 PM, Maxime Ripard wrote:
> >>> Hi Stefan,
> >>>
> >>> On Tue, Nov 26, 2019 at 01:05:08PM +0200, Stefan Mavrodiev wrote:
> >>>> On A64-OLinuXino boards, PG9 is used for USB1 enable/disable. The
> >>>> port is supplied by DLDO4, which is disabled by default. The patch
> >>>> adds the regulator as vcc-pg, which is later used by the pinctrl.
> >>>>
> >>>> Signed-off-by: Stefan Mavrodiev <[email protected]>
> >>>> ---
> >>>> arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts | 4 ++++
> >>>> 1 file changed, 4 insertions(+)
> >>>>
> >>>> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
> >>>> index 01a9a52edae4..c9d8c9c4ef20 100644
> >>>> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
> >>>> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
> >>>> @@ -163,6 +163,10 @@
> >>>> status = "okay";
> >>>> };
> >>>>
> >>>> +&pio {
> >>>> + vcc-pg-supply=<®_dldo4>;
> >>> The equal sign should have spaces around it.
> >>>
> >>> Also, can you please list all the bank supplies while you're at it?
> >> Sure. Should the supplies defined as regulators names be added also to the
> >> pio node?
> >> For example reg_aldo1 is named "vcc-pe".
> > As far as I can tell, the A64 has regulators for PC, PD, PE, PG and
> > PL, so you should list those (PL being under r_pio)
>
> After quick check I've found a bug (maybe?). It's not possible to specify
> vcc-pl-supply, because of this:
>
> https://elixir.bootlin.com/linux/latest/source/drivers/pinctrl/sunxi/pinctrl-sunxi.c#L778
>
> During the probe of the pmu, the pinctrl tries to get a regulator, that
> doesn't exist yet.
> Because of this the system doesn't start (as expected).
It's a circular dependency. The pinctrl driver requires a regulator, which
is provided by the PMIC, which requires the pinctrl driver to mux a pin
for the bus.
For now there's no way to fix it, other than breaking the dependency.
> I've tried to ignore -EPROBE_DEFER. This seems to work, but only because
> the regulator for
> PL is defined as "regulator-always-on". The problem is that the refcount
> is not incremented.
> So if you export one gpio and the unexport it, the regulator will be
> disabled. I'm not sure
> how this can be resolved.
>
> Should I skip vcc-pl-supply for now and list the other bank supplies?
Yes. That is the preferred and probably only way to deal with it.
Please leave a comment saying why vcc-pl was skipped.
ChenYu
> >> Also, since the commit message will be different for better representation
> >> of the changes, should I send the next
> >> patch as v2 or as a new one?
> > Either way works for me as long as the commit message matches the changes.
> >
> > Thanks!
> > Maxime