From: Hongyu Xie <[email protected]>
xhci_check_args returns 4 types of value, -ENODEV, -EINVAL, 1 and 0.
xhci_urb_enqueue and xhci_check_streams_endpoint return -EINVAL if
the return value of xhci_check_args <= 0.
This will cause a problem.
For example, r8152_submit_rx calling usb_submit_urb in
drivers/net/usb/r8152.c.
r8152_submit_rx will never get -ENODEV after submiting an urb
when xHC is halted,
because xhci_urb_enqueue returns -EINVAL in the very beginning.
Fixes: 203a86613fb3 ("xhci: Avoid NULL pointer deref when host dies.")
Cc: [email protected]
Signed-off-by: Hongyu Xie <[email protected]>
---
v2: keep return value to -EINVAL for roothub urbs
drivers/usb/host/xhci.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index dc357cabb265..948546b98af0 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1604,9 +1604,12 @@ static int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flag
struct urb_priv *urb_priv;
int num_tds;
- if (!urb || xhci_check_args(hcd, urb->dev, urb->ep,
- true, true, __func__) <= 0)
+ if (!urb)
return -EINVAL;
+ ret = xhci_check_args(hcd, urb->dev, urb->ep,
+ true, true, __func__);
+ if (ret <= 0)
+ return ret ? ret : -EINVAL;
slot_id = urb->dev->slot_id;
ep_index = xhci_get_endpoint_index(&urb->ep->desc);
@@ -3323,7 +3326,7 @@ static int xhci_check_streams_endpoint(struct xhci_hcd *xhci,
return -EINVAL;
ret = xhci_check_args(xhci_to_hcd(xhci), udev, ep, 1, true, __func__);
if (ret <= 0)
- return -EINVAL;
+ return ret ? ret : -EINVAL;
if (usb_ss_max_streams(&ep->ss_ep_comp) == 0) {
xhci_warn(xhci, "WARN: SuperSpeed Endpoint Companion"
" descriptor for ep 0x%x does not support streams\n",
--
2.25.1
On 9.2.2022 4.52, Hongyu Xie wrote:
> From: Hongyu Xie <[email protected]>
>
> xhci_check_args returns 4 types of value, -ENODEV, -EINVAL, 1 and 0.
> xhci_urb_enqueue and xhci_check_streams_endpoint return -EINVAL if
> the return value of xhci_check_args <= 0.
> This will cause a problem.
> For example, r8152_submit_rx calling usb_submit_urb in
> drivers/net/usb/r8152.c.
> r8152_submit_rx will never get -ENODEV after submiting an urb
> when xHC is halted,
> because xhci_urb_enqueue returns -EINVAL in the very beginning.
>
> Fixes: 203a86613fb3 ("xhci: Avoid NULL pointer deref when host dies.")
> Cc: [email protected]
> Signed-off-by: Hongyu Xie <[email protected]>
> ---
Thanks, added to queue.
Changed the commit message and header a bit:
"xhci: Prevent futile URB re-submissions due to incorrect return value.
The -ENODEV return value from xhci_check_args() is incorrectly changed
to -EINVAL in a couple places before propagated further.
xhci_check_args() returns 4 types of value, -ENODEV, -EINVAL, 1 and 0.
xhci_urb_enqueue and xhci_check_streams_endpoint return -EINVAL if
the return value of xhci_check_args <= 0.
This causes problems for example r8152_submit_rx, calling usb_submit_urb
in drivers/net/usb/r8152.c.
r8152_submit_rx will never get -ENODEV after submiting an urb when xHC
is halted because xhci_urb_enqueue returns -EINVAL in the very beginning."
Let me know if you disagree with this.
Thanks
-Mathias
Hi,
On 2022/2/9 17:29, Mathias Nyman wrote:
> On 9.2.2022 4.52, Hongyu Xie wrote:
>> From: Hongyu Xie <[email protected]>
>>
>> xhci_check_args returns 4 types of value, -ENODEV, -EINVAL, 1 and 0.
>> xhci_urb_enqueue and xhci_check_streams_endpoint return -EINVAL if
>> the return value of xhci_check_args <= 0.
>> This will cause a problem.
>> For example, r8152_submit_rx calling usb_submit_urb in
>> drivers/net/usb/r8152.c.
>> r8152_submit_rx will never get -ENODEV after submiting an urb
>> when xHC is halted,
>> because xhci_urb_enqueue returns -EINVAL in the very beginning.
>>
>> Fixes: 203a86613fb3 ("xhci: Avoid NULL pointer deref when host dies.")
>> Cc: [email protected]
>> Signed-off-by: Hongyu Xie <[email protected]>
>> ---
> Thanks, added to queue.
> Changed the commit message and header a bit:
>
> "xhci: Prevent futile URB re-submissions due to incorrect return value.
>
> The -ENODEV return value from xhci_check_args() is incorrectly changed
> to -EINVAL in a couple places before propagated further.
>
> xhci_check_args() returns 4 types of value, -ENODEV, -EINVAL, 1 and 0.
> xhci_urb_enqueue and xhci_check_streams_endpoint return -EINVAL if
> the return value of xhci_check_args <= 0.
> This causes problems for example r8152_submit_rx, calling usb_submit_urb
> in drivers/net/usb/r8152.c.
> r8152_submit_rx will never get -ENODEV after submiting an urb when xHC
> is halted because xhci_urb_enqueue returns -EINVAL in the very beginning."
>
> Let me know if you disagree with this.
>
> Thanks
> -Mathias
Sounds good to me.
Do I have to send another patch with commit message and header changed?
Thanks
Hongyu Xie
On 10.2.2022 3.04, 谢泓宇 wrote:
> Hi,
>
> On 2022/2/9 17:29, Mathias Nyman wrote:
>> On 9.2.2022 4.52, Hongyu Xie wrote:
>>> From: Hongyu Xie <[email protected]>
>>>
>>> xhci_check_args returns 4 types of value, -ENODEV, -EINVAL, 1 and 0.
>>> xhci_urb_enqueue and xhci_check_streams_endpoint return -EINVAL if
>>> the return value of xhci_check_args <= 0.
>>> This will cause a problem.
>>> For example, r8152_submit_rx calling usb_submit_urb in
>>> drivers/net/usb/r8152.c.
>>> r8152_submit_rx will never get -ENODEV after submiting an urb
>>> when xHC is halted,
>>> because xhci_urb_enqueue returns -EINVAL in the very beginning.
>>>
>>> Fixes: 203a86613fb3 ("xhci: Avoid NULL pointer deref when host dies.")
>>> Cc: [email protected]
>>> Signed-off-by: Hongyu Xie <[email protected]>
>>> ---
>> Thanks, added to queue.
>> Changed the commit message and header a bit:
>>
>> "xhci: Prevent futile URB re-submissions due to incorrect return value.
>> The -ENODEV return value from xhci_check_args() is incorrectly changed
>> to -EINVAL in a couple places before propagated further.
>> xhci_check_args() returns 4 types of value, -ENODEV, -EINVAL, 1 and 0.
>> xhci_urb_enqueue and xhci_check_streams_endpoint return -EINVAL if
>> the return value of xhci_check_args <= 0.
>> This causes problems for example r8152_submit_rx, calling usb_submit_urb
>> in drivers/net/usb/r8152.c.
>> r8152_submit_rx will never get -ENODEV after submiting an urb when xHC
>> is halted because xhci_urb_enqueue returns -EINVAL in the very beginning."
>>
>> Let me know if you disagree with this.
>>
>> Thanks
>> -Mathias
>
> Sounds good to me.
>
> Do I have to send another patch with commit message and header changed?
>
> Thanks
>
> Hongyu Xie
>
No need, I'll submit it.
-Mathias