Convert the DT binding documentation for the Amlogic axg sound card to
schema.
Signed-off-by: Jerome Brunet <[email protected]>
---
.../bindings/sound/amlogic,axg-sound-card.txt | 124 ------------
.../sound/amlogic,axg-sound-card.yaml | 183 ++++++++++++++++++
2 files changed, 183 insertions(+), 124 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt
deleted file mode 100644
index 80b411296480..000000000000
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt
+++ /dev/null
@@ -1,124 +0,0 @@
-Amlogic AXG sound card:
-
-Required properties:
-
-- compatible: "amlogic,axg-sound-card"
-- model : User specified audio sound card name, one string
-
-Optional properties:
-
-- audio-aux-devs : List of phandles pointing to auxiliary devices
-- audio-widgets : Please refer to widgets.txt.
-- audio-routing : A list of the connections between audio components.
-
-Subnodes:
-
-- dai-link: Container for dai-link level properties and the CODEC
- sub-nodes. There should be at least one (and probably more)
- subnode of this type.
-
-Required dai-link properties:
-
-- sound-dai: phandle and port of the CPU DAI.
-
-Required TDM Backend dai-link properties:
-- dai-format : CPU/CODEC common audio format
-
-Optional TDM Backend dai-link properties:
-- dai-tdm-slot-rx-mask-{0,1,2,3}: Receive direction slot masks
-- dai-tdm-slot-tx-mask-{0,1,2,3}: Transmit direction slot masks
- When omitted, mask is assumed to have to no
- slots. A valid must have at one slot, so at
- least one these mask should be provided with
- an enabled slot.
-- dai-tdm-slot-num : Please refer to tdm-slot.txt.
- If omitted, slot number is set to accommodate the largest
- mask provided.
-- dai-tdm-slot-width : Please refer to tdm-slot.txt. default to 32 if omitted.
-- mclk-fs : Multiplication factor between stream rate and mclk
-
-Backend dai-link subnodes:
-
-- codec: dai-link representing backend links should have at least one subnode.
- One subnode for each codec of the dai-link.
- dai-link representing frontend links have no codec, therefore have no
- subnodes
-
-Required codec subnodes properties:
-
-- sound-dai: phandle and port of the CODEC DAI.
-
-Optional codec subnodes properties:
-
-- dai-tdm-slot-tx-mask : Please refer to tdm-slot.txt.
-- dai-tdm-slot-rx-mask : Please refer to tdm-slot.txt.
-
-Example:
-
-sound {
- compatible = "amlogic,axg-sound-card";
- model = "AXG-S420";
- audio-aux-devs = <&tdmin_a>, <&tdmout_c>;
- audio-widgets = "Line", "Lineout",
- "Line", "Linein",
- "Speaker", "Speaker1 Left",
- "Speaker", "Speaker1 Right";
- "Speaker", "Speaker2 Left",
- "Speaker", "Speaker2 Right";
- audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2",
- "SPDIFOUT IN 0", "FRDDR_A OUT 3",
- "TDM_C Playback", "TDMOUT_C OUT",
- "TDMIN_A IN 2", "TDM_C Capture",
- "TDMIN_A IN 5", "TDM_C Loopback",
- "TODDR_A IN 0", "TDMIN_A OUT",
- "Lineout", "Lineout AOUTL",
- "Lineout", "Lineout AOUTR",
- "Speaker1 Left", "SPK1 OUT_A",
- "Speaker2 Left", "SPK2 OUT_A",
- "Speaker1 Right", "SPK1 OUT_B",
- "Speaker2 Right", "SPK2 OUT_B",
- "Linein AINL", "Linein",
- "Linein AINR", "Linein";
-
- dai-link@0 {
- sound-dai = <&frddr_a>;
- };
-
- dai-link@1 {
- sound-dai = <&toddr_a>;
- };
-
- dai-link@2 {
- sound-dai = <&tdmif_c>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-2 = <1 1>;
- dai-tdm-slot-tx-mask-3 = <1 1>;
- dai-tdm-slot-rx-mask-1 = <1 1>;
- mclk-fs = <256>;
-
- codec@0 {
- sound-dai = <&lineout>;
- };
-
- codec@1 {
- sound-dai = <&speaker_amp1>;
- };
-
- codec@2 {
- sound-dai = <&speaker_amp2>;
- };
-
- codec@3 {
- sound-dai = <&linein>;
- };
-
- };
-
- dai-link@3 {
- sound-dai = <&spdifout>;
-
- codec {
- sound-dai = <&spdif_dit>;
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
new file mode 100644
index 000000000000..b7459fad0e7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
@@ -0,0 +1,183 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,axg-sound-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic AXG sound card
+
+maintainers:
+ - Jerome Brunet <[email protected]>
+
+properties:
+ compatible:
+ const: amlogic,axg-sound-card
+
+ audio-aux-devs:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: list of auxiliary devices
+
+ audio-routing:
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ description: |
+ A list of the connections between audio components. Each entry is a
+ pair of strings, the first being the connection's sink, the second
+ being the connection's source.
+
+ audio-widgets:
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ description: |
+ A list off component DAPM widget. Each entry is a pair of strings,
+ the first being the widget type, the second being the widget name
+
+ model:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: User specified audio sound card name
+
+patternProperties:
+ "^dai-link-[0-9]+$":
+ type: object
+ additionalProperties: false
+ description: |
+ Container for dai-link level properties and the CODEC sub-nodes.
+ There should be at least one (and probably more) subnode of this type
+
+ properties:
+ dai-format:
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ i2s, left-j, dsp_a ]
+
+ dai-tdm-slot-num:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Number of slots in use. If omitted, slot number is set to
+ accommodate the largest mask provided.
+ maximum: 32
+
+ dai-tdm-slot-width:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Width in bits for each slot
+ enum: [ 8, 16, 20, 24, 32 ]
+ default: 32
+
+ mclk-fs:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Multiplication factor between the frame rate and master clock
+ rate
+
+ sound-dai:
+ maxItems: 1
+ description: phandle of the CPU DAI
+
+ patternProperties:
+ "^dai-tdm-slot-(t|r)x-mask-[0-3]$":
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 32
+ description: |
+ Transmit and receive cpu slot masks of each TDM lane
+ When omitted, mask is assumed to have to no slots. A valid
+ interface must have at least one slot, so at least one these
+ mask should be provided with an enabled slot.
+
+ "^codec(-[0-9]+)?$":
+ type: object
+ additionalProperties: false
+ description: |
+ dai-link representing backend links should have at least one subnode.
+ One subnode for each codec of the dai-link. dai-link representing
+ frontend links have no codec, therefore have no subnodes
+
+ properties:
+ sound-dai:
+ maxItems: 1
+ description: phandle of the codec DAI
+
+ patternProperties:
+ "^dai-tdm-slot-(t|r)x-mask$":
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 32
+ description: Transmit and receive codec slot masks
+
+ required:
+ - sound-dai
+
+ required:
+ - sound-dai
+
+required:
+ - model
+ - dai-link-0
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "AXG-S420";
+ audio-aux-devs = <&tdmin_a>, <&tdmout_c>;
+ audio-widgets = "Line", "Lineout",
+ "Line", "Linein",
+ "Speaker", "Speaker1 Left",
+ "Speaker", "Speaker1 Right",
+ "Speaker", "Speaker2 Left",
+ "Speaker", "Speaker2 Right";
+ audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2",
+ "SPDIFOUT IN 0", "FRDDR_A OUT 3",
+ "TDM_C Playback", "TDMOUT_C OUT",
+ "TDMIN_A IN 2", "TDM_C Capture",
+ "TDMIN_A IN 5", "TDM_C Loopback",
+ "TODDR_A IN 0", "TDMIN_A OUT",
+ "Lineout", "Lineout AOUTL",
+ "Lineout", "Lineout AOUTR",
+ "Speaker1 Left", "SPK1 OUT_A",
+ "Speaker2 Left", "SPK2 OUT_A",
+ "Speaker1 Right", "SPK1 OUT_B",
+ "Speaker2 Right", "SPK2 OUT_B",
+ "Linein AINL", "Linein",
+ "Linein AINR", "Linein";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&toddr_a>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&tdmif_c>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ dai-tdm-slot-rx-mask-1 = <1 1>;
+ mclk-fs = <256>;
+
+ codec-0 {
+ sound-dai = <&lineout>;
+ };
+
+ codec-1 {
+ sound-dai = <&speaker_amp1>;
+ };
+
+ codec-2 {
+ sound-dai = <&speaker_amp2>;
+ };
+
+ codec-3 {
+ sound-dai = <&linein>;
+ };
+ };
+
+ dai-link-3 {
+ sound-dai = <&spdifout>;
+
+ codec {
+ sound-dai = <&spdif_dit>;
+ };
+ };
+ };
--
2.39.0
On 06/02/2023 16:34, Jerome Brunet wrote:
> Convert the DT binding documentation for the Amlogic axg sound card to
> schema.
>
> Signed-off-by: Jerome Brunet <[email protected]>
> ---
> .../bindings/sound/amlogic,axg-sound-card.txt | 124 ------------
> .../sound/amlogic,axg-sound-card.yaml | 183 ++++++++++++++++++
> 2 files changed, 183 insertions(+), 124 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt
> create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
>
Thank you for your patch. There is something to discuss/improve.
> -};
> diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
> new file mode 100644
> index 000000000000..b7459fad0e7f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
> @@ -0,0 +1,183 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/amlogic,axg-sound-card.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic AXG sound card
> +
> +maintainers:
> + - Jerome Brunet <[email protected]>
> +
> +properties:
> + compatible:
> + const: amlogic,axg-sound-card
> +
> + audio-aux-devs:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: list of auxiliary devices
> +
> + audio-routing:
> + $ref: /schemas/types.yaml#/definitions/non-unique-string-array
> + description: |
You still have everywhere | which should be removed. Here and in almost
every other description when no special formatting is needed.
Best regards,
Krzysztof
On Mon 06 Feb 2023 at 20:21, Krzysztof Kozlowski <[email protected]> wrote:
>> +
>> + audio-routing:
>> + $ref: /schemas/types.yaml#/definitions/non-unique-string-array
>> + description: |
>
> You still have everywhere | which should be removed. Here and in almost
> every other description when no special formatting is needed.
I'm sorry if I misunderstood your comment. I thought the problem was
with the '-' of '|-', which I removed here.
Should I use '>' for the YAML multiline format instead ?
>
>
>
> Best regards,
> Krzysztof
On 07/02/2023 10:25, Jerome Brunet wrote:
>
> On Mon 06 Feb 2023 at 20:21, Krzysztof Kozlowski <[email protected]> wrote:
>
>>> +
>>> + audio-routing:
>>> + $ref: /schemas/types.yaml#/definitions/non-unique-string-array
>>> + description: |
>>
>> You still have everywhere | which should be removed. Here and in almost
>> every other description when no special formatting is needed.
>
> I'm sorry if I misunderstood your comment. I thought the problem was
> with the '-' of '|-', which I removed here.
>
> Should I use '>' for the YAML multiline format instead ?
I asked to remove "|-". Don't add any other character - why do you need
it? Multiline descriptions don't need block scalar headers unless you
want to preserve some format.
Best regards,
Krzysztof